• Practice
  • About 18 min
  • 5 practice questions

The consumption function: APC, MPC, APS and MPS

Explain the consumption function C = f(Y), read a consumption schedule and the 45° line, and calculate the average and marginal propensities to consume and save with full working.

If something looks wrong, please tell us.

By the end of this lesson you can

  • State the meaning of the consumption function and write it as C = f(Y) and C = a + bY.
  • Explain autonomous consumption and the 45° (zero-saving) line.
  • Calculate APC, MPC, APS and MPS and use MPC + MPS = 1.

National income is made of consumption and investment. How much people spend out of income decides how much is saved, how much must be invested, and how strongly a new investment raises income (the multiplier, lesson 4). Everything in this chapter starts from the consumption function.

Meaning of the consumption function

The consumption function (or propensity to consume) is the functional relationship between total consumption and national income: C = f(Y). C is the dependent variable and Y the independent one. It assumes ceteris paribus: only income changes, and all other influences on consumption are held constant. In practice it is a schedule of the amounts consumed at different income levels.

A straight-line form is C = a + bY, with a > 0 and 0 < b < 1. Here a is autonomous consumption: even at zero income people must eat, so they spend out of past savings or borrowing. b is the marginal propensity to consume.

Worked example 1: building a schedule

Made-up consumption function: C = 30 + 0.75Y (₹ crore). Saving S = Y − C.

Schedule for C = 30 + 0.75Y (₹ crore, made up)
Income YConsumption CSaving S = Y − C
030−30
4060−20
8090−10
1201200
16015010
20018020

Working for one row: at Y = 160, C = 30 + 0.75 × 160 = 30 + 120 = 150 and S = 160 − 150 = 10. At Y = 120, C = 30 + 90 = 120, so saving is zero: this is the break-even point, where the consumption line cuts the 45° line. On a diagram with income on the x-axis and consumption on the y-axis, the 45° line shows every point where C = Y, so it is a zero-saving line. Below the break-even income, C is above the 45° line (dissaving); above it, the vertical gap between the 45° line and the C line is saving.

The four technical attributes

Propensities to consume and to save
MeasureFormulaMeaning
Average propensity to consumeAPC = C ÷ YShare of total income consumed
Marginal propensity to consumeMPC = ΔC ÷ ΔYShare of extra income consumed; 0 < MPC < 1
Average propensity to saveAPS = S ÷ YShare of total income saved
Marginal propensity to saveMPS = ΔS ÷ ΔYShare of extra income saved

APC + APS = 1 and MPC + MPS = 1, so MPS = 1 − MPC. The textbook notes APC is usually shown as a percentage and MPC as a fraction.

Worked example 2: all four measures from the schedule

Use the rows Y = 120, C = 120 and Y = 160, C = 150. APC at Y = 160: 150 ÷ 160 = 0.9375 = 93.75 per cent. APS at Y = 160: 10 ÷ 160 = 0.0625 = 6.25 per cent. Check: 93.75 + 6.25 = 100. MPC: ΔC = 150 − 120 = 30, ΔY = 160 − 120 = 40, so MPC = 30 ÷ 40 = 0.75 (the b in the equation). MPS: ΔS = 10 − 0 = 10, so MPS = 10 ÷ 40 = 0.25. Check: 0.75 + 0.25 = 1.

Worked example 3: a household

Made-up: a family's monthly income rises from ₹50,000 to ₹60,000 and its spending from ₹40,000 to ₹46,000. APC before: 40,000 ÷ 50,000 = 0.80. APC after: 46,000 ÷ 60,000 ≈ 0.767. MPC: (46,000 − 40,000) ÷ (60,000 − 50,000) = 6,000 ÷ 10,000 = 0.6. MPS: 1 − 0.6 = 0.4. Because MPC (0.6) is less than APC (0.8), the average falls as income rises.

Key takeaways: C = f(Y), or C = a + bY with autonomous consumption a and MPC b. The 45° line is the zero-saving line. APC = C/Y, MPC = ΔC/ΔY, APS = S/Y, MPS = ΔS/ΔY, and MPC + MPS = 1.

Check your understanding

  1. 1. In the consumption function C = a + bY, the term 'a' represents:

    1. the marginal propensity to consume
    2. autonomous consumption at zero income
    3. saving
    4. investment
    Show answer

    Answer: B. 'a' is consumption that takes place even when income is zero, financed from past savings: autonomous consumption. 'b' is the MPC.

  2. 2. Made-up: income rises from ₹400 crore to ₹500 crore and consumption from ₹340 crore to ₹410 crore. The MPC is:

    1. 0.82
    2. 0.85
    3. 0.3
    4. 0.7
    Show answer

    Answer: D. MPC = ΔC ÷ ΔY = (410 − 340) ÷ (500 − 400) = 70 ÷ 100 = 0.7. 0.82 and 0.85 are average propensities (410/500 and 340/400).

  3. 3. If MPC = 0.65, MPS is:

    1. 0.35
    2. 0.65
    3. 1.65
    4. 1.35
    Show answer

    Answer: A. MPC + MPS = 1, so MPS = 1 − 0.65 = 0.35.

  4. 4. The 45° line in the consumption diagram is called the zero-saving line because:

    1. it shows investment
    2. it always lies below the C curve
    3. at every point on it consumption equals income
    4. it starts at autonomous consumption
    Show answer

    Answer: C. On a 45° line the values on both axes are equal, so C = Y and saving = Y − C = 0.

  5. 5. Made-up: Y = ₹250 crore and S = ₹50 crore. APC is:

    1. 20 per cent
    2. 80 per cent
    3. 25 per cent
    4. 50 per cent
    Show answer

    Answer: B. C = 250 − 50 = 200. APC = 200 ÷ 250 = 0.8 = 80 per cent. APS = 50 ÷ 250 = 20 per cent; together 100 per cent.

Privacy · Terms · Refunds · Delivery