• Practice
  • About 16 min
  • 5 practice questions

Interpreting choropleth maps and comparing the two methods

Interpret a choropleth map step by step, convert totals into densities and percentages before mapping, avoid common errors, and compare the dot and choropleth methods.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Interpret a choropleth map using the five steps given in the chapter.
  • Convert totals into densities or percentages before drawing a choropleth map.
  • Compare the dot and choropleth methods and pick the right one.

Drawing a map is half the skill; the other half is reading what it says. A choropleth map can show at a glance which districts lag behind in literacy or which are most crowded, but only if it is drawn from the right data and read with care.

How to interpret a choropleth map

  1. Identify the geographic feature or phenomenon being mapped, from the title.
  2. Find the value of each shade by reading the legend.
  3. Identify the scale of the administrative units shown: states, districts or taluks.
  4. Using the legend, identify areas that share the same shade and so the same range of values.
  5. Describe the density or concentration of the feature within and between areas: where it is high, where low, and whether high values cluster together.

Preparing the data: totals into ratios

Before drawing, check what kind of figure you have. If the data are totals, such as population or crop area, convert them:

Density = total ÷ area. Percentage = (part ÷ whole) × 100.

Worked example 1: computing densities (made-up data)

Made-up totals converted to population density
DistrictPopulationArea (km²)Density (persons per km²)
X18,60,0003,10018,60,000 ÷ 3,100 = 600
Y9,00,0004,5009,00,000 ÷ 4,500 = 200
Z12,00,0001,50012,00,000 ÷ 1,500 = 800

Notice that X has the largest population, but Z is the most crowded. A choropleth map of raw population would shade X darkest; a choropleth of density correctly shades Z darkest. This is why choropleth maps should show ratios.

Worked example 2: computing a percentage (made-up data)

A made-up taluk has a total cropped area of 48,000 ha, of which 12,000 ha is under paddy. Percentage under paddy = 12,000 ÷ 48,000 × 100 = 25 percent. Another taluk has 9,000 ha of paddy out of 15,000 ha: 9,000 ÷ 15,000 × 100 = 60 percent. Although the first taluk grows more paddy in total, paddy is far more dominant in the second, which would be shaded darker.

Common errors in choropleth maps

  • Mapping raw totals, so that large units look important only because they are large.
  • Shades not in order, such as bright red for medium and pale blue for high, which confuses the reader.
  • Overlapping classes (60-70 and 70-80 without a rule for 70) or gaps between classes.
  • Forgetting that the whole unit gets one shade, even if values vary inside it; a choropleth hides variation within each unit.

Dot method or choropleth method?

The two methods of this unit

  • Dot method
    • Absolute numbers
    • Dots placed where the item actually occurs
    • Shows variation within a unit
    • Needs knowledge of the area's geography
  • Choropleth method
    • Ratios: density, rates, percentages
    • Whole unit shaded uniformly
    • Hides variation within a unit
    • Quick to read and compare between units

Worked example 3: reading a description

A made-up choropleth map of sex ratio shows the coastal districts in the darkest shade (above 1,000 females per 1,000 males) and the northern interior districts in the lightest shade (below 950). Interpret it using the five steps: the theme is sex ratio; the shades run from below 950 to above 1,000; the units are districts; the coastal districts share the highest class and the northern interior shares the lowest; so the sex ratio is highest along the coast and declines inland. A geographer would then ask why, for example by comparing it with maps of migration.

Key takeaways: interpret a choropleth by reading the theme, the legend, the unit level, the units sharing each shade and the overall pattern. Convert totals into densities (total ÷ area) or percentages (part ÷ whole × 100) before mapping. Avoid raw totals, disordered shades and overlapping classes. Use dots for absolute numbers and choropleths for ratios.

Check your understanding

  1. 1. Made-up data: a district has 15,00,000 people and an area of 2,500 km². Its population density is:

    1. 6,000 per km²
    2. 600 per km²
    3. 60 per km²
    4. 1,667 per km²
    Show answer

    Answer: B. Density = population ÷ area = 15,00,000 ÷ 2,500 = 600 persons per km².

  2. 2. Made-up data: 7,200 ha of a taluk's 24,000 ha cropped area is under cotton. The percentage under cotton is:

    1. 3.3 percent
    2. 33 percent
    3. 72 percent
    4. 30 percent
    Show answer

    Answer: D. Percentage = 7,200 ÷ 24,000 × 100 = 0.3 × 100 = 30 percent.

  3. 3. Why is a choropleth map of raw total population misleading?

    1. Large units look dark simply because they are large, not because they are crowded
    2. Totals cannot be shown on any map
    3. Totals are always the same in every district
    4. Choropleth maps cannot show numbers
    Show answer

    Answer: A. A big district may have a large total but low density. Choropleths are meant for ratios such as density, so totals should be converted first or shown with dots.

  4. 4. In interpreting a choropleth, the value of each shade is found from the:

    1. north arrow
    2. scale bar
    3. legend
    4. title
    Show answer

    Answer: C. The legend (key) gives the range of values that each shade represents.

  5. 5. Which statement correctly compares the two methods?

    1. Choropleth maps show variation within a unit better than dot maps
    2. Dot maps are used for ratios and choropleths for absolute numbers
    3. Both methods need no data
    4. Dot maps show absolute numbers and variation within units; choropleths show ratios with each unit shaded uniformly
    Show answer

    Answer: D. Dots are placed where the item occurs, showing absolute numbers and internal variation; a choropleth gives one shade per unit for a ratio, hiding internal variation.

Privacy · Terms · Refunds · Delivery