- Practice
- About 15 min
- 5 practice questions
The dot method: dot value, size and placing
Explain the dot method for absolute numbers, choose a suitable dot value and dot size, place dots according to geographical conditions while avoiding negative areas, and list the materials needed.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain what the dot method shows and why it gives a realistic picture.
- Choose a dot value and size from the highest and lowest values in the data.
- Place dots correctly, leaving negative areas blank.
Look at a well-drawn dot map of population and you can almost see the people: crowded along rivers and coasts, thin in the hills and deserts. That realistic impression is why the dot method is a favourite of geographers for showing absolute numbers.
The idea of the dot method
The dot method is a convenient way of representing absolute numbers on maps. Each dot is assigned a fixed value (for example, one dot = 10,000 persons), and the required number of dots is placed within each area according to the actual distribution pattern there. The method gives a good visual impression, a realistic distribution pattern, and also helps in understanding correlations, for example between the dots of paddy area and the courses of rivers.
It is used to show the distribution of population, cattle, area under crops, output of commodities and similar items when the data are given as absolute figures for administrative units.
Choosing the dot value
The value of a dot must be decided carefully, keeping in view the highest and the lowest values in the data. It should be a rounded number that is easy to read in the legend. If the value is too large, small units get only one dot or none; if it is too small, large units get so many dots that they merge into a black patch.
Worked example 1: testing dot values
Made-up data: the highest district has 3,02,000 cattle and the lowest 7,500. Test three dot values. One dot = 1,000: highest needs 302 dots, too many to fit; lowest gets 7.5, about 8. One dot = 1,00,000: highest gets 3, lowest gets 0.075, which rounds to 0, so the district looks empty. One dot = 10,000: highest gets 30.2, about 30, which fits; lowest gets 0.75, about 1, so it still appears. Answer: one dot = 10,000 cattle is the best choice.
Size of dots
- Dots should be round and of uniform size throughout the map.
- They should be small, but not as small as a fine point; dots of about 1 to 1.5 mm in diameter are effective.
- Dots that are too small give an overly sparse pattern; dots that are too large merge and hide the pattern.
Placing the dots
The placing of dots must conform to the geographical conditions of the area, so knowledge of the area is needed. Sandy, stony and forested areas are unimportant for crops and settlements. Marshes, lakes and river beds are negative areas and are left without dots; unproductive lands are called negative lands. A good practice is to first shade the negative areas lightly with a lead pencil, place the dots outside them, and then erase the pencil shading after all dots are placed.
Placing dots correctly
- Study the area Use topographical sheets and relief, soil, rainfall and irrigation maps.
- Mark negative areas Lightly shade lakes, marshes, river beds, forests and barren land in pencil.
- Place dots Put each unit's dots where the item actually occurs, such as along canals for crops.
- Erase Rub out the pencil shading, leaving a clean dot pattern.
Materials required
- An outline map showing the boundaries of the administrative divisions; the smaller the divisions, the greater the accuracy.
- Topographical sheets, irrigation maps, relief maps, soil maps and rainfall distribution maps of the area to guide the placing of dots.
- The statistical data in absolute figures for each division.
Worked example 2: where do the dots go?
A made-up taluk has 18 dots for paddy area. Its west is hilly forest, its centre has a large lake, and its east is a canal-irrigated plain. Where should the 18 dots go? Answer: shade the forest and lake as negative areas and place almost all 18 dots in the canal-irrigated eastern plain, closer together near the canals. Spreading them evenly across the taluk would wrongly suggest paddy is grown in the forest and the lake.
Dot method: one fixed value per dot, a rounded number chosen from the highest and lowest values; uniform round dots about 1-1.5 mm; dots placed by geography, never on negative areas.
Key takeaways: the dot method shows absolute numbers by uniform dots of fixed value, giving a realistic pattern that helps reveal correlations. Choose a rounded dot value from the highest and lowest values so that large units do not merge and small units still appear. Use round dots of about 1-1.5 mm. Place dots according to geographical conditions, leaving negative areas such as lakes, marshes and river beds blank.
Check your understanding
-
1. The dot method is best suited to represent:
- absolute numbers
- percentages
- densities per square kilometre
- qualitative categories
Show answer
Answer: A. The dot method represents absolute numbers, such as total population or cattle, with each dot standing for a fixed value.
-
2. The chapter suggests dots of about what diameter?
- 0.1 mm
- 5 to 6 mm
- 1 to 1.5 mm
- 1 cm
Show answer
Answer: C. Dots of about 1 to 1.5 mm in diameter are effective: visible but not so large that they merge.
-
3. Lakes, marshes and river beds on a dot map of crop area are treated as:
- areas for the largest dots
- negative areas left without dots
- areas where dots are doubled
- boundaries of the map
Show answer
Answer: B. These are negative areas where crops are not grown, so they are left without dots.
-
4. Made-up data: the highest unit has 4,80,000 people and the lowest 6,000. Which dot value is most suitable?
- One dot = 500 persons
- One dot = 10,00,000 persons
- One dot = 1,00,000 persons
- One dot = 10,000 persons
Show answer
Answer: D. At 10,000 per dot the highest unit gets 48 dots and the lowest about 1 (0.6 rounds to 1), so both appear. 500 per dot gives 960 dots; 1,00,000 and 10,00,000 leave the lowest unit with no dot.
-
5. Why are negative areas first shaded lightly with a lead pencil?
- To show them as high-value areas
- So that dots are not placed on them, after which the shading is erased
- To make the map darker
- To mark the boundaries of states
Show answer
Answer: B. Light pencil shading reminds the map-maker to keep dots off the negative areas; it is erased once the dots are placed.
Sign in to keep track of the lessons you finish.