Revision notes

Unit 11 Thematic Mapping: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Thematic maps: meaning, purposes and types

General reference map and thematic map

  • General reference map
    • Shows many features together
    • Rivers, cities, boundaries, roads
    • Used to locate places
    • Example: a political map of a state
  • Thematic map
    • Emphasises one theme or topic
    • Uses symbols for quantity or quality
    • Used to study patterns
    • Example: literacy rate by district
Types of thematic map (the dot and choropleth methods are studied in detail in this unit)
TypeHow it shows dataSuitable data
Dot mapDots of equal size, each standing for a fixed numberAbsolute numbers: population, cattle, crop area
Choropleth mapShades or tints filling administrative units, light for low, dark for highRatios: density, percentages, rates
Isopleth mapLines joining places of equal valueValues that change smoothly: rainfall, temperature, height
Proportional symbol mapCircles, squares or bars sized according to the valueTotals at points, such as city populations
Chorochromatic mapDifferent colours or patterns for categoriesQualitative data: soil types, land use, vegetation

Choosing a thematic map method

  • Absolute numbers
    • Dot map
    • Proportional symbol map
  • Ratios per unit or percentages
    • Choropleth map
  • Continuous values
    • Isopleth map
  • Categories, not numbers
    • Chorochromatic map

A thematic map shows one theme. Absolute numbers: dots. Ratios or densities: choropleth shades. Continuous values: isopleths. Categories: colours (chorochromatic).

Key takeaways: a thematic map emphasises one theme, physical or human, and shows its spatial variation using symbols; a reference map shows general features. Thematic maps display density, distribution, magnitude, gradients, relationships and movement, and serve to give information about places, show patterns and compare maps. John Snow's 1854 cholera map is an early example used for problem analysis. Five types are choropleth, isopleth, proportional symbol, dot and chorochromatic.

Read the full lesson

Lesson 2

The dot method: dot value, size and placing

Placing dots correctly

  1. Study the area Use topographical sheets and relief, soil, rainfall and irrigation maps.
  2. Mark negative areas Lightly shade lakes, marshes, river beds, forests and barren land in pencil.
  3. Place dots Put each unit's dots where the item actually occurs, such as along canals for crops.
  4. Erase Rub out the pencil shading, leaving a clean dot pattern.

Dot method: one fixed value per dot, a rounded number chosen from the highest and lowest values; uniform round dots about 1-1.5 mm; dots placed by geography, never on negative areas.

Key takeaways: the dot method shows absolute numbers by uniform dots of fixed value, giving a realistic pattern that helps reveal correlations. Choose a rounded dot value from the highest and lowest values so that large units do not merge and small units still appear. Use round dots of about 1-1.5 mm. Place dots according to geographical conditions, leaving negative areas such as lakes, marshes and river beds blank.

Read the full lesson

Lesson 3

Constructing and reading a dot map

Building a dot map

  1. Base map Obtain an outline map of the administrative units to be shown.
  2. Dot value Study the data and choose a rounded dot value from the highest and lowest values.
  3. Number of dots Divide each unit's value by the dot value and round to a whole number.
  4. Dot size Choose a round dot of suitable uniform size, about 1-1.5 mm.
  5. Place the dots Put the correct number in each unit, following its geography.
  6. Finish Add title, legend (one dot = ...), north arrow, scale note and source.
Made-up data: cattle population, one dot = 10,000 cattle
DistrictCattleValue ÷ 10,000Dots (rounded)
A2,46,00024.625
B1,18,50011.8512
C3,02,30030.2330
D74,8007.487
E1,61,20016.1216

Number of dots = value of the unit ÷ value of one dot, rounded to the nearest whole number.

The dot method weighed up

  • Strengths
    • Realistic picture of distribution
    • Shows concentration within a unit
    • Easy to understand visually
    • Helps see correlations with physical features
  • Limitations
    • Counting dots for exact values is slow
    • Needs knowledge of the area to place dots
    • Choice of dot value and size affects the look
    • Rounding loses small amounts

Key takeaways: to construct a dot map, take a base map, choose a rounded dot value, divide each unit's value by it and round, choose a uniform dot size, place the dots by geography and add title, legend and source. Check by comparing total dots × dot value with the data total. To read a dot map, use the legend, look for clusters and gaps, and explain them with physical and human factors.

Read the full lesson

Lesson 4

The choropleth method: classes, shades and construction

Making a choropleth map

  1. Arrange Arrange the data in ascending or descending order.
  2. Range Range = maximum value - minimum value.
  3. Class interval Interval = range ÷ 5, for five classes from very low to very high.
  4. Classify List the units falling in each class.
  5. Shade Assign shades or patterns from light (very low) to dark (very high).
  6. Finish Shade each unit, and add title, legend, north arrow and source.

Range = maximum - minimum. Class interval = range ÷ 5. Five classes: very low, low, medium, high, very high; shades from light to dark.

Classes for the made-up density data
CategoryClass (persons per km²)DistrictsShade
Very low200 - 400C, L, I, FLightest
Low400 - 600A, H, E, KLight
Medium600 - 800B, GMedium
High800 - 1,000JDark
Very high1,000 - 1,200DDarkest

Key takeaways: a choropleth map shades administrative units from light (low) to dark (high). It suits ratios: densities, rates and percentages, not raw totals. Arrange the data, find range = maximum - minimum, take interval = range ÷ 5, list the units in five classes, and shade in order. Check that every unit is in exactly one class.

Read the full lesson

Lesson 5

Interpreting choropleth maps and comparing the two methods

Density = total ÷ area. Percentage = (part ÷ whole) × 100.

Made-up totals converted to population density
DistrictPopulationArea (km²)Density (persons per km²)
X18,60,0003,10018,60,000 ÷ 3,100 = 600
Y9,00,0004,5009,00,000 ÷ 4,500 = 200
Z12,00,0001,50012,00,000 ÷ 1,500 = 800

The two methods of this unit

  • Dot method
    • Absolute numbers
    • Dots placed where the item actually occurs
    • Shows variation within a unit
    • Needs knowledge of the area's geography
  • Choropleth method
    • Ratios: density, rates, percentages
    • Whole unit shaded uniformly
    • Hides variation within a unit
    • Quick to read and compare between units

Key takeaways: interpret a choropleth by reading the theme, the legend, the unit level, the units sharing each shade and the overall pattern. Convert totals into densities (total ÷ area) or percentages (part ÷ whole × 100) before mapping. Avoid raw totals, disordered shades and overlapping classes. Use dots for absolute numbers and choropleths for ratios.

Read the full lesson

Privacy · Terms · Refunds · Delivery