• Practice
  • About 24 min
  • 5 practice questions

Areas of plane regions bounded by curves

Find the area between a curve and the x-axis or the y-axis, handle curves that cross the axis, and find the area between two curves using vertical or horizontal strips.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Find the area between y = f(x), the x-axis and the lines x = a, x = b, whether the curve is above or below the axis.
  • Split the interval when the curve crosses the axis.
  • Find the area between x = f(y), the y-axis and the lines y = c, y = d.
  • Find the area between two curves by vertical strips (upper − lower) or horizontal strips (right − left).

In Lesson 1 a definite integral of a non-negative function gave an area. Section 9.8 of the Tamil Nadu textbook turns this into a method: sketch the region, slice it into thin strips, write the area of one strip, and add the strips with an integral. Areas are always positive and in square units.

Area with respect to the x-axis

Divide the region into thin vertical strips of width Δx and height |y|. Adding and taking the limit gives the cases below. The key requirement is that y does not change sign on the interval of each integral.

Position of y = f(x) on [a, b]Area
Above the x-axis (y ≥ 0)A = ∫ₐᵇ y dx
Below the x-axis (y ≤ 0)A = −∫ₐᵇ y dx = |∫ₐᵇ y dx|
Crosses the axis at cA = |∫ₐᶜ y dx| + |∫_c^b y dx|

Worked example 1: a parabola above the axis

Find the area enclosed by y = 4 − x² and the x-axis. Working: y = 0 at x = ±2, and y ≥ 0 between them. A = ∫₋₂² (4 − x²) dx. The integrand is even, so A = 2∫₀² (4 − x²) dx = 2[4x − x³/3]₀² = 2(8 − 8/3) = 32/3 square units.

Worked example 2: a curve that crosses the axis

Find the area between y = x³ − x and the x-axis from x = −1 to x = 1. Working: x³ − x = x(x − 1)(x + 1) is ≥ 0 on [−1, 0] and ≤ 0 on [0, 1]. Note that ∫₋₁¹ (x³ − x) dx = 0 because the function is odd, but that is not the area. A = ∫₋₁⁰ (x³ − x) dx + ∫₀¹ (x − x³) dx = 1/4 + 1/4 = 1/2 square unit. (Each piece is [x²/2 − x⁴/4] over a unit interval, giving 1/2 − 1/4.)

Area with respect to the y-axis

For a curve x = f(y) between the lines y = c and y = d, use thin horizontal strips of width Δy and length |x|. If x ≥ 0 (the curve is to the right of the y-axis), A = ∫_c^d x dy; if x ≤ 0, A = −∫_c^d x dy.

Worked example 3: horizontal strips

Find the area bounded by x = y², the y-axis and the lines y = 1 and y = 3. Working: x = y² ≥ 0, so A = ∫₁³ y² dy = [y³/3]₁³ = 9 − 1/3 = 26/3 square units. Writing this with vertical strips would need two different formulas, so choosing the right direction saves work.

Area between two curves

Vertical strips: A = ∫ₐᵇ [f(x) − g(x)] dx where f(x) ≥ g(x) on [a, b] (upper minus lower). Horizontal strips: A = ∫_c^d [p(y) − q(y)] dy where p(y) ≥ q(y) (right minus left).

— Area between two curves

Finding the area between two curves

  1. Sketch both curves Shade the region.
  2. Find intersections Solve the equations together; these give the limits.
  3. Choose strips Vertical: upper − lower. Horizontal: right − left.
  4. Integrate Split if the upper or right curve changes.

Worked example 4: a parabola and a line (vertical strips)

Find the area between y = x² and y = x + 2. Working: x² = x + 2 gives x² − x − 2 = (x − 2)(x + 1) = 0, so x = −1 and x = 2. On [−1, 2] the line is above the parabola (at x = 0: 2 > 0). A = ∫₋₁² (x + 2 − x²) dx = [x²/2 + 2x − x³/3]₋₁². At 2: 2 + 4 − 8/3 = 10/3. At −1: 1/2 − 2 + 1/3 = −7/6. A = 10/3 + 7/6 = 27/6 = 9/2 square units.

Worked example 5: a parabola and a line (horizontal strips)

Find the area between y² = 4x and the line y = 2x − 4. Working: write both as x in terms of y: x = y²/4 and x = (y + 4)/2. Equating, y² = 2y + 8, so y² − 2y − 8 = (y − 4)(y + 2) = 0, giving y = −2 and y = 4. The line is to the right (at y = 0: 2 > 0). A = ∫₋₂⁴ [(y + 4)/2 − y²/4] dy = [y²/4 + 2y − y³/12]₋₂⁴. At 4: 4 + 8 − 16/3 = 20/3. At −2: 1 − 4 + 2/3 = −7/3. A = 20/3 + 7/3 = 9 square units. With vertical strips the lower boundary changes at x = 1, so two integrals would be needed.

A standard result obtained the same way: the ellipse x²/a² + y²/b² = 1 encloses area 4∫₀ᵃ (b/a)√(a² − x²) dx = 4(b/a)(πa²/4) = πab; with a = b = r this is the circle's πr².

Key takeaways: always sketch first; area is positive, so a part of the curve below the axis needs a minus sign or modulus, and you must split at crossings; use ∫ x dy when the curve is given as x = f(y); between two curves integrate (upper − lower) dx or (right − left) dy between the intersection points, choosing the direction that needs fewer integrals.

Check your understanding

  1. 1. The area bounded by y = 3x², the x-axis and the lines x = 0, x = 2 is

    1. 6
    2. 8
    3. 12
    4. 24
    Show answer

    Answer: B. A = ∫₀² 3x² dx = [x³]₀² = 8 square units.

  2. 2. The area between y = x² − 1 and the x-axis from x = −1 to x = 1 is

    1. 4/3
    2. −4/3
    3. 2/3
    4. 2
    Show answer

    Answer: A. y = x² − 1 ≤ 0 on [−1, 1], so A = −∫₋₁¹ (x² − 1) dx = −[x³/3 − x]₋₁¹ = −(−2/3 − 2/3) = 4/3.

  3. 3. The area bounded by x = 2y, the y-axis and the lines y = 0, y = 3 is

    1. 6
    2. 3
    3. 18
    4. 9
    Show answer

    Answer: D. A = ∫₀³ 2y dy = [y²]₀³ = 9 square units (a triangle with base 6 and height 3).

  4. 4. The area between y = x and y = x² is

    1. 1/2
    2. 1/3
    3. 1/6
    4. 1
    Show answer

    Answer: C. They meet at x = 0 and x = 1, with x ≥ x² between. A = ∫₀¹ (x − x²) dx = 1/2 − 1/3 = 1/6.

  5. 5. The area enclosed by the ellipse x²/9 + y²/4 = 1 is

    1. 36π
    2. 6π
    3. 13π
    4. 12π
    Show answer

    Answer: B. Area of an ellipse is πab with a = 3 and b = 2, so 6π square units.

Sign in to keep track of the lessons you finish.

Next lesson → Volumes of solids of revolution

Privacy · Terms · Refunds · Delivery