- Practice
- About 22 min
- 5 practice questions
Volumes of solids of revolution
Find the volume of a solid formed by revolving a plane region about the x-axis or the y-axis using thin discs, derive the cone and sphere formulas, and handle regions between two curves.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain how revolving a plane region about an axis generates a solid.
- Derive V = π∫ₐᵇ y² dx (about the x-axis) and V = π∫_c^d x² dy (about the y-axis) from thin discs.
- Find volumes of cones, spheres, paraboloids and other solids of revolution.
- Find the volume when the region lies between two curves (a hollow solid).
A potter's wheel turns a flat profile into a round pot. Section 9.9 of the Tamil Nadu textbook does the same with mathematics: a plane region given one full turn (360°, or 2π radians) about a fixed line in its plane sweeps out a solid of revolution. A semicircle turned about its diameter gives a sphere; a rectangle turned about one side gives a cylinder.
The disc method
Take the region under y = f(x) ≥ 0, above the x-axis, between x = a and x = b. Cut it into thin vertical strips of width Δx. When the region turns about the x-axis, each strip sweeps out a thin disc: a cylinder of radius y and height Δx, whose volume is πy²Δx. Adding the discs and letting Δx → 0 gives the integral. Turning a region bounded by x = g(y) ≥ 0, the y-axis and the lines y = c, y = d about the y-axis gives the analogous formula with horizontal discs.
About the x-axis: V = π ∫ₐᵇ y² dx. About the y-axis: V = π ∫_c^d x² dy.
Setting up a volume of revolution
- Sketch the region Note the axis of revolution.
- Slice perpendicular to the axis Each slice becomes a disc.
- Radius of a disc y (about x-axis) or x (about y-axis), as a function of the variable.
- Integrate π(radius)² Between the limits along the axis.
Worked example 1: the cone formula
Revolve the triangle bounded by y = (r/h)x, the x-axis and the line x = h about the x-axis. The result is a right circular cone with base radius r and height h. Working: V = π∫₀ʰ (r²/h²) x² dx = π(r²/h²)[x³/3]₀ʰ = π(r²/h²)(h³/3) = (1/3)πr²h, the familiar formula.
Worked example 2: the sphere formula
Revolve the upper half of the circle x² + y² = a² about the x-axis. Working: y² = a² − x², so V = π∫₋ₐᵃ (a² − x²) dx = 2π∫₀ᵃ (a² − x²) dx (even integrand) = 2π[a²x − x³/3]₀ᵃ = 2π(a³ − a³/3) = (4/3)πa³.
Worked example 3: a paraboloid
Find the volume formed when the region under y = √x from x = 0 to x = 4 is revolved about the x-axis. Working: y² = x, so V = π∫₀⁴ x dx = π[x²/2]₀⁴ = 8π cubic units. For comparison, the cylinder of the same radius (2) and length (4) has volume 16π: the paraboloid fills exactly half of it.
Revolving about the y-axis
When the axis is the y-axis, express x in terms of y, use horizontal discs of radius x, and integrate with respect to y between the y-limits of the region.
Worked example 4: about the y-axis
The region bounded by y = x³, the y-axis and the line y = 8 (with x ≥ 0) is revolved about the y-axis. Working: x = y^(1/3), so x² = y^(2/3). V = π∫₀⁸ y^(2/3) dy = π[(3/5) y^(5/3)]₀⁸ = π(3/5)(8^(5/3)) = π(3/5)(32) = 96π/5 cubic units, since 8^(5/3) = (8^(1/3))⁵ = 2⁵ = 32.
Regions between two curves
If the region lies between an outer curve y = f(x) and an inner curve y = g(x), with f(x) ≥ g(x) ≥ 0, the solid has a hole. Each slice is a washer, a disc of radius f minus a disc of radius g, so V = π∫ₐᵇ [f(x)² − g(x)²] dx. Note that this is the difference of the squares, not the square of the difference.
Worked example 5: a hollow solid
The region between y = √x and y = x², which meet at (0, 0) and (1, 1), is revolved about the x-axis. On [0, 1], √x ≥ x². V = π∫₀¹ [(√x)² − (x²)²] dx = π∫₀¹ (x − x⁴) dx = π(1/2 − 1/5) = 3π/10 cubic units.
| Region | Axis | Volume |
|---|---|---|
| Under y = f(x), a ≤ x ≤ b | x-axis | π∫ₐᵇ y² dx |
| Left of x = g(y), c ≤ y ≤ d | y-axis | π∫_c^d x² dy |
| Between y = f(x) ≥ y = g(x) ≥ 0 | x-axis | π∫ₐᵇ (f² − g²) dx |
Key takeaways: a solid of revolution is the sum of thin discs of volume π(radius)² × thickness; about the x-axis V = π∫y² dx, about the y-axis V = π∫x² dy; the familiar cone and sphere formulas drop out of these integrals; for a region between two curves subtract the squares of the radii.
Check your understanding
-
1. The region under y = 2 from x = 0 to x = 5 is revolved about the x-axis. The volume is
- 10π
- 20π
- 100π
- 50π
Show answer
Answer: B. V = π∫₀⁵ 2² dx = 20π. This is a cylinder of radius 2 and height 5: πr²h = 20π.
-
2. The region under y = x from x = 0 to x = 3 is revolved about the x-axis. The volume is
- 3π
- 27π
- 9π
- 9π/2
Show answer
Answer: C. V = π∫₀³ x² dx = π[x³/3]₀³ = 9π, a cone of radius 3 and height 3: (1/3)π(9)(3) = 9π.
-
3. The region under y = eˣ from x = 0 to x = 1 is revolved about the x-axis. The volume is
- π(e − 1)
- π(e² + 1)/2
- π e²/2
- π(e² − 1)/2
Show answer
Answer: D. V = π∫₀¹ e^(2x) dx = π[e^(2x)/2]₀¹ = π(e² − 1)/2.
-
4. The region bounded by x = √y, the y-axis and the lines y = 0, y = 2 is revolved about the y-axis. The volume is
- 2π
- 4π
- π
- 8π/3
Show answer
Answer: A. x² = y, so V = π∫₀² y dy = π[y²/2]₀² = 2π.
-
5. The region between y = 2 and y = 1 for 0 ≤ x ≤ 3 is revolved about the x-axis. The volume is
- 3π
- 12π
- 9π
- 6π
Show answer
Answer: C. V = π∫₀³ (2² − 1²) dx = π(3)(3) = 9π: a tube of outer radius 2, inner radius 1 and length 3. Squaring the difference (1² = 1) would wrongly give 3π.
Sign in to keep track of the lessons you finish.