Revision notes

Chapter 9 Applications of Integration: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

The definite integral as the limit of a sum and the fundamental theorems

∫ₐᵇ f(x) dx = lim (n → ∞) [(b − a)/n] Σ (r = 1 to n) f(a + r(b − a)/n). The sum may equally run from r = 0 to n − 1.

— Definite integral as the limit of a sum (right-end form)

The two fundamental theorems

  • First fundamental theorem
    • f continuous on [a, b]
    • F(x) = ∫ₐˣ f(u) du
    • Then F′(x) = f(x)
    • So F is an anti-derivative of f
  • Second fundamental theorem
    • f continuous on [a, b]
    • F any anti-derivative of f
    • Then ∫ₐᵇ f(x) dx = F(b) − F(a)
    • Written [F(x)]ₐᵇ

Key takeaways: a definite integral is the limit of Riemann sums of signed rectangle areas; the left-end, right-end and mid-point rules are three choices of sample point; ∫ₐᵇ f = lim [(b − a)/n] Σ f(a + r(b − a)/n); the second fundamental theorem gives ∫ₐᵇ f = F(b) − F(a) with no constant; a definite integral counts area below the axis as negative.

Read the full lesson

Lesson 2

Properties of definite integrals

PropertyStatement
1. Dummy variable∫ₐᵇ f(x) dx = ∫ₐᵇ f(u) du
2. Reversal∫_b^a f(x) dx = −∫ₐᵇ f(x) dx (limits swapped)
3. Splitting∫ₐᵇ f(x) dx = ∫ₐᶜ f(x) dx + ∫_c^b f(x) dx, a < c < b
4. Linearity∫ₐᵇ [αf(x) + βg(x)] dx = α∫ₐᵇ f(x) dx + β∫ₐᵇ g(x) dx
5. SubstitutionIf x = g(u), ∫ₐᵇ f(x) dx = ∫_c^d f(g(u)) g′(u) du, where g(c) = a, g(d) = b

∫ₐᵇ f(x) dx = ∫ₐᵇ f(a + b − x) dx. In particular ∫₀ᵃ f(x) dx = ∫₀ᵃ f(a − x) dx.

— Property 6

Which symmetry property applies?

  • Limits −a to a Test f(−x).
    • f(−x) = f(x), even: 2∫₀ᵃ f
    • f(−x) = −f(x), odd: 0
    • Neither: split f into even + odd parts
  • Limits 0 to 2a Test f(2a − x).
    • f(2a − x) = f(x): 2∫₀ᵃ f
    • f(2a − x) = −f(x): 0
  • Limits 0 to a or a to b Try a − x or a + b − x.
    • Add the two forms of I

If f(a − x) = f(x), then ∫₀ᵃ x f(x) dx = (a/2) ∫₀ᵃ f(x) dx.

— Property 12

Key takeaways: change the limits when you substitute; split at points where |x − c| or a sign changes; over [−a, a] odd functions integrate to 0 and even functions to twice the half; over [0, 2a] test f(2a − x); when f(x) + f(a + b − x) is simple, write I twice and add; ∫₀ᵃ x f(x) dx = (a/2)∫₀ᵃ f(x) dx when f(a − x) = f(x).

Read the full lesson

Lesson 3

Bernoulli's formula, improper integrals, reduction formulae and the gamma integral

∫ u v dx = u v₍₁₎ − u⁽¹⁾ v₍₂₎ + u⁽²⁾ v₍₃₎ − u⁽³⁾ v₍₄₎ + ... (signs alternate)

— Bernoulli's formula
IntegralReduction formula
Iₙ = ∫₀^(π/2) sinⁿx dxIₙ = [(n − 1)/n] Iₙ₋₂, n ≥ 2
Iₙ = ∫₀^(π/2) cosⁿx dxIₙ = [(n − 1)/n] Iₙ₋₂, n ≥ 2
Iₘ,ₙ = ∫₀^(π/2) sinᵐx cosⁿx dxIₘ,ₙ = [(n − 1)/(m + n)] Iₘ,ₙ₋₂, n ≥ 2
Iₘ,ₙ = ∫₀¹ xᵐ(1 − x)ⁿ dxIₘ,ₙ = [n/(m + n + 1)] Iₘ,ₙ₋₁, n ≥ 1

From the recurrence to factorials

  1. Γ(1) = 1 ∫₀^∞ e^(−x) dx.
  2. Γ(n + 1) = nΓ(n) By parts.
  3. Γ(n) = (n − 1)! So ∫₀^∞ e^(−x) xⁿ dx = n!.
  4. Substitute t = ax ∫₀^∞ e^(−ax) xⁿ dx = n!/a^(n+1), a > 0.

Key takeaways: Bernoulli: differentiate the polynomial down to 0, integrate the other factor up, alternate the signs; an improper integral is a limit and may diverge; for ∫₀^(π/2) sinⁿx or cosⁿx, multiply (n − 1)/n, (n − 3)/(n − 2), ... and add the factor π/2 only for even n; ∫₀¹ xᵐ(1 − x)ⁿ dx = m! n!/(m + n + 1)!; Γ(n) = (n − 1)! and ∫₀^∞ e^(−ax)xⁿ dx = n!/a^(n+1).

Read the full lesson

Lesson 4

Areas of plane regions bounded by curves

Position of y = f(x) on [a, b]Area
Above the x-axis (y ≥ 0)A = ∫ₐᵇ y dx
Below the x-axis (y ≤ 0)A = −∫ₐᵇ y dx = |∫ₐᵇ y dx|
Crosses the axis at cA = |∫ₐᶜ y dx| + |∫_c^b y dx|

Vertical strips: A = ∫ₐᵇ [f(x) − g(x)] dx where f(x) ≥ g(x) on [a, b] (upper minus lower). Horizontal strips: A = ∫_c^d [p(y) − q(y)] dy where p(y) ≥ q(y) (right minus left).

— Area between two curves

Finding the area between two curves

  1. Sketch both curves Shade the region.
  2. Find intersections Solve the equations together; these give the limits.
  3. Choose strips Vertical: upper − lower. Horizontal: right − left.
  4. Integrate Split if the upper or right curve changes.

Key takeaways: always sketch first; area is positive, so a part of the curve below the axis needs a minus sign or modulus, and you must split at crossings; use ∫ x dy when the curve is given as x = f(y); between two curves integrate (upper − lower) dx or (right − left) dy between the intersection points, choosing the direction that needs fewer integrals.

Read the full lesson

Lesson 5

Volumes of solids of revolution

About the x-axis: V = π ∫ₐᵇ y² dx. About the y-axis: V = π ∫_c^d x² dy.

— Volume of a solid of revolution

Setting up a volume of revolution

  1. Sketch the region Note the axis of revolution.
  2. Slice perpendicular to the axis Each slice becomes a disc.
  3. Radius of a disc y (about x-axis) or x (about y-axis), as a function of the variable.
  4. Integrate π(radius)² Between the limits along the axis.
Summary of the formulas
RegionAxisVolume
Under y = f(x), a ≤ x ≤ bx-axisπ∫ₐᵇ y² dx
Left of x = g(y), c ≤ y ≤ dy-axisπ∫_c^d x² dy
Between y = f(x) ≥ y = g(x) ≥ 0x-axisπ∫ₐᵇ (f² − g²) dx

Key takeaways: a solid of revolution is the sum of thin discs of volume π(radius)² × thickness; about the x-axis V = π∫y² dx, about the y-axis V = π∫x² dy; the familiar cone and sphere formulas drop out of these integrals; for a region between two curves subtract the squares of the radii.

Read the full lesson

Privacy · Terms · Refunds · Delivery