• Practice
  • About 26 min
  • 5 practice questions

Diffraction: single slit, Fresnel's distance, grating and resolution

Find the minima and maxima of single-slit diffraction, discuss the first minimum, derive Fresnel's distance, use the grating equation to measure wavelengths, and apply Rayleigh's criterion to the resolution of instruments.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Distinguish Fresnel and Fraunhofer diffraction, and interference from diffraction.
  • Derive a sin θ = nλ for the minima of a single slit and state the maxima condition.
  • Discuss the first minimum for a < λ, a = λ, a slightly larger than λ, and a ≫ λ.
  • Derive Fresnel's distance z = a²/2λ.
  • Use (a + b) sin θ = mλ (sin θ = Nmλ) and Rayleigh's criterion θ = 1.22λ/a.

Diffraction is the bending of waves round sharp edges into the geometrical shadow. All waves diffract. Sound bends round doors and buildings easily because its wavelength is comparable to them; light shows clear diffraction only when the obstacle or opening is comparable to its tiny wavelength.

Fresnel and Fraunhofer diffraction
Fresnel diffractionFraunhofer diffraction
Spherical or cylindrical wavefront is diffractedPlane wavefront is diffracted
Source at a finite distanceSource effectively at infinity
No convex lenses needed in the laboratoryConvex lenses are used in the laboratory
Difficult to observe and analyseEasy to observe and analyse

Diffraction at a single slit

A plane wavefront falls normally on a slit AB of width a; the pattern forms on a screen at distance D. Consider a point P in a direction θ from the central line. First minimum: divide the slit into two halves of width a/2. Each point in the upper half has a 'corresponding point' a/2 below it in the lower half. Waves from a pair of corresponding points have a path difference (a/2) sin θ. If this equals λ/2, every pair cancels and P is dark: (a/2) sin θ = λ/2, so a sin θ = λ. Second minimum: divide into four parts of width a/4: (a/4) sin θ = λ/2 gives a sin θ = 2λ. In general, dividing into 2n parts gives the nth minimum: a sin θ = nλ (n = 1, 2, 3, ...).

Maxima. Divide the slit into an odd number of parts: all pairs cancel except one part, which leaves P bright. 3 parts: a sin θ = 3λ/2 (1st maximum); 5 parts: 5λ/2; in general a sin θ = (2n + 1)λ/2, n = 0, 1, 2, ... The central (0th) maximum is the brightest and twice as wide as the others; the intensity of the side maxima falls quickly. For small angles, sin θ ≈ tan θ = y/D, so a minimum is at y = nλD/a.

Discussion of the first minimum, sin θ = λ/a. (i) a < λ: sin θ > 1, impossible, so no minimum and no diffraction pattern. (ii) a = λ: θ = 90°: the central maximum fills the whole shadow region. (iii) a a little larger than λ, say a = 2λ: θ = 30°, a clearly measurable pattern. (iv) a ≫ λ: θ is so small that the first minimum lies within the width of the slit itself and no diffraction is seen. So to observe diffraction, the slit should be only a few times wider than the wavelength.

Worked example 1: a single slit

Light of 600 nm falls on a slit 0.10 mm wide; the screen is 1.2 m away. First minimum: sin θ = λ/a = (600 × 10⁻⁹)/(0.10 × 10⁻³) = 6.0 × 10⁻³, so θ ≈ 6.0 × 10⁻³ rad. On the screen y₁ = λD/a = 6.0 × 10⁻³ × 1.2 = 7.2 × 10⁻³ m = 7.2 mm. Width of central maximum = 2y₁ = 14.4 mm. Second minimum: y₂ = 2λD/a = 14.4 mm from the centre, so each side maximum is 7.2 mm wide, half the central one.

Fresnel's distance

Light passing a slit does not spread visibly at first. Fresnel's distance z is the distance up to which ray optics holds; beyond it the spreading by diffraction becomes significant and wave optics is needed. It is the distance at which the spread of the beam equals the slit width. The first minimum is at θ = λ/a (small angle). The beam of width a has spread by a by the distance z where 2θ = a/z, so θ = a/(2z). Equating, λ/a = a/(2z), giving z = a²/2λ. Example: a = 1.0 mm, λ = 500 nm: z = (1.0 × 10⁻³)²/(2 × 500 × 10⁻⁹) = 10⁻⁶/10⁻⁶ = 1.0 m.

Interference and diffraction patterns compared
InterferenceDiffraction
Bright and dark fringes equally spacedCentral bright fringe twice as wide as the others
All bright fringes of equal intensityIntensity falls rapidly for higher orders
Many fringesFew fringes

Diffraction grating

A grating is a transparent plate with many equally spaced opaque rulings (according to the textbook, a modern grating has about 6000 lines per centimetre). The clear spaces are slits of width a and the rulings have width b; e = a + b is the grating element. For a plane wave falling normally, waves from adjacent corresponding points (a + b apart) in direction θ have path difference (a + b) sin θ. A maximum forms when (a + b) sin θ = mλ, m = 0, 1, 2, ... (the order). With N = 1/(a + b), the number of lines per metre, sin θ = Nmλ. Note the difference: for a single slit a sin θ = nλ gives minima, but for a grating sin θ = Nmλ gives maxima. Since sin θ ≤ 1, the highest order possible is the whole number below 1/(Nλ).

Measuring a wavelength. The grating is set on a spectrometer's prism table, normal to the parallel beam from the collimator. The telescope is turned to the first-order image on the left and then on the right; the difference of the readings is 2θ. Then λ = sin θ/(Nm). With white light the central maximum is white and each order is a spectrum from violet (inner) to red (outer), so the wavelength of each colour can be found the same way. A CD looks coloured because its closely spaced tracks act as a reflection grating.

Worked example 2: a grating

(a) A grating with 6000 lines per cm gives a second-order maximum at 45°. N = 6000 × 100 = 6.0 × 10⁵ m⁻¹. λ = sin 45°/(Nm) = 0.7071/(6.0 × 10⁵ × 2) = 5.89 × 10⁻⁷ m = 589 nm (sodium yellow). (b) A grating with 5000 lines per cm is lit by 589 nm light. N = 5.0 × 10⁵ m⁻¹. First order: sin θ = Nλ = 5.0 × 10⁵ × 589 × 10⁻⁹ = 0.2945, θ = 17.1°. Highest order: 1/(Nλ) = 1/0.2945 = 3.4, so m = 3 is the last visible order.

Resolution and Rayleigh's criterion

Diffraction blurs every image: each point of an object gives a small diffraction pattern, not a point. A circular aperture of diameter a gives rings called Airy's discs, with the first minimum at a sin θ = 1.22λ (the factor 1.22 comes from higher mathematics). For small angles the angular resolution is θ = 1.22λ/a, and with a lens of focal length f the radius of the central disc is r₀ = 1.22λf/a (spatial resolution). Rayleigh's criterion: two point images are just resolved when the central maximum of one falls on the first minimum of the other. Better resolution needs a shorter wavelength and a larger aperture. The ability of an instrument to show two close points separately is its resolving power, the reciprocal of resolution.

Worked example 3: telescope and eye

(a) A telescope objective 1.0 m across, light of 550 nm: θ = 1.22 × 550 × 10⁻⁹/1.0 = 6.7 × 10⁻⁷ rad. (b) An eye pupil 2.5 mm across at the same wavelength: θ = 1.22 × 550 × 10⁻⁹/(2.5 × 10⁻³) = 2.7 × 10⁻⁴ rad, about 400 times worse. Two dots 1.0 mm apart can therefore be resolved by such an eye only up to a distance of about 1.0 × 10⁻³/2.7 × 10⁻⁴ ≈ 3.7 m.

Single slit: minima a sin θ = nλ, maxima a sin θ = (2n + 1)λ/2. Fresnel's distance z = a²/2λ. Grating: (a + b) sin θ = mλ, sin θ = Nmλ. Circular aperture: θ = 1.22λ/a.

Key takeaways

  • Fraunhofer diffraction uses plane wavefronts and is easy to analyse.
  • Single slit: dark where a sin θ = nλ; the central maximum is twice as wide as the others.
  • Diffraction is seen only when the slit is a few wavelengths wide; z = a²/2λ marks where ray optics stops working.
  • Grating maxima: sin θ = Nmλ; it measures wavelengths accurately with a spectrometer.
  • Rayleigh: just resolved when one central maximum lies on the other's first minimum; θ = 1.22λ/a.

Check your understanding

  1. 1. In single-slit diffraction, the condition a sin θ = 2λ gives:

    1. the second maximum
    2. the first minimum
    3. the central maximum
    4. the second minimum
    Show answer

    Answer: D. For a single slit, a sin θ = nλ gives the nth minimum; n = 2 is the second minimum (slit divided into four parts).

  2. 2. Light of wavelength 500 nm falls on a slit 0.25 mm wide. The screen is 2.0 m away. The width of the central maximum is:

    1. 4.0 mm
    2. 8.0 mm
    3. 2.0 mm
    4. 1.0 mm
    Show answer

    Answer: B. y₁ = λD/a = (500 × 10⁻⁹ × 2.0)/(0.25 × 10⁻³) = 4.0 × 10⁻³ m. The central maximum stretches from −y₁ to +y₁: 8.0 mm.

  3. 3. Fresnel's distance for a 2.0 mm aperture and light of 400 nm is:

    1. 5.0 m
    2. 2.5 m
    3. 10 m
    4. 0.5 m
    Show answer

    Answer: A. z = a²/2λ = (2.0 × 10⁻³)²/(2 × 400 × 10⁻⁹) = 4.0 × 10⁻⁶/8.0 × 10⁻⁷ = 5.0 m.

  4. 4. A grating has 5000 lines per cm. For light of 600 nm, the highest order of maximum that can be seen is:

    1. 2
    2. 5
    3. 4
    4. 3
    Show answer

    Answer: D. N = 5.0 × 10⁵ m⁻¹. sin θ = Nmλ ≤ 1 gives m ≤ 1/(Nλ) = 1/(5.0 × 10⁵ × 600 × 10⁻⁹) = 1/0.30 = 3.33. The order must be a whole number, so m = 3 is the highest.

  5. 5. To improve the resolving power of a telescope, one should:

    1. use light of longer wavelength
    2. use an objective of larger diameter
    3. use an eyepiece of longer focal length
    4. reduce the diameter of the objective
    Show answer

    Answer: B. Angular resolution θ = 1.22λ/a. A larger aperture a (or a shorter λ) makes θ smaller, so finer detail is resolved.

Privacy · Terms · Refunds · Delivery