- Practice
- About 22 min
- 5 practice questions
Discharge through gases, cathode rays, Thomson's e/m and Millikan's oil drop
Describe how a gas conducts at low pressure, list the properties of cathode rays, and derive and use Thomson's e/m and Millikan's oil-drop results for the electron.
If something looks wrong, please tell us.
By the end of this lesson you can
- Describe the stages of discharge in a gas discharge tube as the pressure is lowered.
- List the properties of cathode rays.
- Find the speed of cathode rays from balanced electric and magnetic fields, and derive e/m = υ²/2V = E²/2VB².
- Write the deflection of an electron beam in an electric field alone.
- Derive the radius and charge of an oil drop in Millikan's experiment and explain why charge is quantised.
An atom is tiny: a hydrogen atom is about 10⁻¹⁰ m across. Richard Feynman's comparison, quoted in the Tamil Nadu textbook, puts it vividly: if an atom were blown up to the size of an apple, the apple on the same scale would be as big as the Earth. Nobody can look inside something so small, so physicists learnt about atoms indirectly, by making gases conduct electricity, by deflecting beams of charged particles and by firing particles at thin foils. This unit follows that story from the discovery of the electron to the nucleus, radioactivity, nuclear energy and quarks. This first lesson covers the experiments that revealed the electron and measured its charge and mass.
Electric discharge through gases
At ordinary pressure a gas is a poor conductor, because it has almost no free charges. A gas discharge tube makes a gas conduct. It is a closed glass tube (the textbook describes one about 50 cm long and 4 cm wide) filled with a pure gas, joined to a vacuum pump and a pressure gauge, with two metal electrodes connected to the secondary of an induction coil giving a very high voltage (around 50 kV). The electrode joined to the positive terminal is the anode and the one joined to the negative terminal is the cathode.
As the pump lowers the pressure, the behaviour changes in stages. At about 110 mm of mercury nothing happens. Near 100 mm of Hg, the gas begins to conduct, with irregular streaks of light and a crackling sound. Around 10 mm of Hg, a glowing positive column stretches between the electrodes. When the pressure falls to about 0.01 mm of Hg, the positive column disappears, a dark region called Crookes' dark space fills the tube, and the glass walls glow green. Invisible rays leave the cathode at this stage; they were named cathode rays and were later shown to be a stream of electrons.
What happens as the pressure in a discharge tube is lowered
- About 110 mm of Hg No discharge
- About 100 mm of Hg Discharge starts: irregular streaks of light and crackling
- About 10 mm of Hg A luminous positive column fills the tube
- About 0.01 mm of Hg Positive column vanishes, Crookes' dark space forms, the glass glows green: cathode rays
Properties of cathode rays
- They carry energy and momentum and travel in straight lines at high speed, of the order of 10⁷ m s⁻¹ (up to about one-tenth of the speed of light).
- Electric and magnetic fields deflect them; the direction of deflection shows that they are negatively charged.
- They produce heat when they strike matter, affect photographic plates and make some crystals and minerals fluoresce.
- When they strike a target of high atomic weight they produce x-rays.
- They ionise the gas through which they pass.
Thomson's experiment: the specific charge e/m
The specific charge of a particle is its charge per unit mass, e/m. J. J. Thomson measured it for cathode rays using a highly evacuated tube. Electrons from the cathode are pulled towards an anode with a pin hole, so a narrow beam emerges. The beam passes between two parallel plates that create an electric field E, while the poles of a magnet create a magnetic field B at right angles to both E and the beam. The beam lands on a screen coated with zinc sulphide, which glows where it is hit.
Step 1: speed of the electrons. Keep E fixed and adjust B until the spot returns to its undeflected position. The electric force eE is then balanced by the magnetic force eυB: eE = eυB, so υ = E/B. Crossed fields used this way act as a velocity selector.
Step 2: e/m. The electrons gained their kinetic energy by falling through the accelerating potential difference V between cathode and anode, so eV = ½mυ². Hence e/m = υ²/(2V), and putting υ = E/B gives e/m = E²/(2VB²). Thomson's method gives e/m ≈ 1.7 × 10¹¹ C kg⁻¹ (the accepted value is 1.76 × 10¹¹ C kg⁻¹). The result is the same whatever gas is used and whatever the electrodes are made of, which showed that the electron is a common constituent of all matter.
Deflection by the electric field alone. Switch off B. Inside plates of length l, the electron feels a vertical force eE and so a vertical acceleration a = eE/m, while it moves horizontally at υ for a time t = l/υ. Starting with no vertical velocity, its vertical deflection on leaving the plates is y′ = ½at² = ½(e/m)E(l/υ)². Using υ = E/B, this becomes y′ = ½(e/m)(l²B²/E). The spot on the screen moves a distance y = Cy′, where C depends on the geometry of the tube, so e/m = 2yE/(C l² B²) can also be found from the deflection.
Velocity selector: υ = E/B. Thomson: e/m = υ²/2V = E²/(2VB²). Accepted e/m of the electron ≈ 1.76 × 10¹¹ C kg⁻¹.
Millikan's oil drop experiment: the charge e
Robert Millikan measured the charge itself. Two horizontal circular metal plates (about 20 cm across and 1.5 cm apart) sit inside a glass-walled chamber, with a potential difference of about 10 kV between them so that the electric field points vertically downward. An atomiser sprays tiny drops of a viscous, non-volatile liquid through a small hole in the top plate. Some drops pick up a negative charge by friction with air, or when x-rays pass between the plates. A light beam illuminates the drops and a microscope views them at right angles.
Field off: finding the radius. A falling drop quickly reaches a constant terminal velocity υ, when its weight is balanced by the upthrust of the air and the viscous drag. With ρ the density of the oil, σ the density of air, r the radius and η the viscosity of air: weight = (4/3)πr³ρg, upthrust = (4/3)πr³σg, and Stokes' drag = 6πηrυ. Balancing, (4/3)πr³(ρ − σ)g = 6πηrυ, which gives r = [9ηυ / 2(ρ − σ)g]^½. Timing the fall over a marked distance gives υ and so r.
Field on: finding the charge. Adjust E until a chosen drop hangs still. There is no motion, so no viscous force. The upward electric force and upthrust balance the weight: qE + (4/3)πr³σg = (4/3)πr³ρg, so q = (4/3)πr³(ρ − σ)g / E. Substituting the radius gives q = (18π/E)[η³υ³ / 2(ρ − σ)g]^½.
Millikan repeated the measurement on many drops and found that every charge was a whole-number multiple of one smallest value, about 1.6 × 10⁻¹⁹ C. Charge is therefore quantised, and this basic unit is the magnitude of the electron's charge, e = 1.6 × 10⁻¹⁹ C (more precisely 1.602 × 10⁻¹⁹ C). Combining e with Thomson's e/m gives the electron's mass, m ≈ 9.1 × 10⁻³¹ kg.
The two classic electron experiments
-
Thomson (cathode rays)
- Measures the ratio e/m
- Crossed E and B fields; υ = E/B
- e/m = E²/(2VB²)
- Same for every gas and electrode
-
Millikan (oil drops)
- Measures the charge e itself
- Terminal velocity gives the drop's radius
- Balancing gives q = (4/3)πr³(ρ − σ)g/E
- Every charge is a whole multiple of e
Worked example 1: speed and specific charge from crossed fields
In a Thomson-type tube, an electric field of 2.0 × 10⁴ V m⁻¹ and a magnetic field of 1.0 × 10⁻³ T together leave the beam undeflected. The accelerating potential difference is 1.14 kV. Find the speed of the electrons and their specific charge. Step 1: υ = E/B = (2.0 × 10⁴)/(1.0 × 10⁻³) = 2.0 × 10⁷ m s⁻¹. Step 2: e/m = υ²/(2V) = (2.0 × 10⁷)²/(2 × 1140) = (4.0 × 10¹⁴)/2280 = 1.75 × 10¹¹ C kg⁻¹, close to the accepted value.
Worked example 2: deflection in an electric field alone
For the beam in example 1 (υ = 2.0 × 10⁷ m s⁻¹), the magnetic field is switched off. The plates are 5.0 cm long and E = 2.0 × 10⁴ V m⁻¹. Take e/m = 1.76 × 10¹¹ C kg⁻¹. Step 1: time between the plates t = l/υ = 0.050/(2.0 × 10⁷) = 2.5 × 10⁻⁹ s. Step 2: acceleration a = (e/m)E = 1.76 × 10¹¹ × 2.0 × 10⁴ = 3.52 × 10¹⁵ m s⁻². Step 3: y′ = ½at² = 0.5 × 3.52 × 10¹⁵ × (2.5 × 10⁻⁹)² = 0.5 × 3.52 × 10¹⁵ × 6.25 × 10⁻¹⁸ = 1.1 × 10⁻² m, that is 1.1 cm.
Worked example 3: charge on an oil drop
Practice data (made up for this example): an oil drop of density 900 kg m⁻³ falls with terminal velocity 1.0 × 10⁻⁴ m s⁻¹ in air of viscosity 1.8 × 10⁻⁵ N s m⁻² and density 1.3 kg m⁻³; g = 9.8 m s⁻². It is held still by a field of 1.02 × 10⁵ V m⁻¹. Step 1 (radius): r² = 9ηυ/[2(ρ − σ)g] = (9 × 1.8 × 10⁻⁵ × 1.0 × 10⁻⁴)/(2 × 898.7 × 9.8) = (1.62 × 10⁻⁸)/(1.761 × 10⁴) = 9.20 × 10⁻¹³ m², so r = 9.59 × 10⁻⁷ m. Step 2 (effective weight): (4/3)πr³(ρ − σ)g = 4.189 × (8.82 × 10⁻¹⁹) × 898.7 × 9.8 = 3.25 × 10⁻¹⁴ N. Step 3 (charge): q = 3.25 × 10⁻¹⁴ / 1.02 × 10⁵ = 3.19 × 10⁻¹⁹ C. Step 4: q/e = 3.19/1.6 ≈ 2, so the drop carries two electronic charges.
Key takeaways
- A gas conducts at low pressure; near 0.01 mm of Hg cathode rays (electrons) leave the cathode.
- Cathode rays are negatively charged, fast, travel in straight lines, ionise gases, cause fluorescence and produce x-rays on heavy targets.
- Thomson: υ = E/B and e/m = E²/(2VB²), independent of the gas and the electrodes.
- Millikan: r = [9ηυ/2(ρ − σ)g]^½ and q = (4/3)πr³(ρ − σ)g/E; every charge is a whole multiple of e = 1.6 × 10⁻¹⁹ C.
Check your understanding
-
1. In Thomson's experiment, an electric field of 3.0 × 10⁴ V m⁻¹ and a magnetic field of 2.0 × 10⁻³ T leave the electron beam undeflected. The speed of the electrons is:
- 6.0 × 10¹ m s⁻¹
- 1.5 × 10⁷ m s⁻¹
- 6.7 × 10⁻⁸ m s⁻¹
- 1.5 × 10⁴ m s⁻¹
Show answer
Answer: B. When the beam is undeflected, eE = eυB, so υ = E/B = (3.0 × 10⁴)/(2.0 × 10⁻³) = 1.5 × 10⁷ m s⁻¹.
-
2. The specific charge of cathode rays measured in a discharge tube:
- Is larger for hydrogen than for neon
- Depends on the metal of the cathode
- Is the same whatever gas and electrodes are used
- Increases with the accelerating voltage
Show answer
Answer: C. Thomson found the same e/m for every gas and every electrode material, which showed that the same particle, the electron, is present in all matter. Changing V changes the speed, not e/m.
-
3. An electron is accelerated from rest through 500 V. Taking e/m = 1.76 × 10¹¹ C kg⁻¹, its speed is about:
- 1.3 × 10⁷ m s⁻¹
- 1.8 × 10¹⁴ m s⁻¹
- 8.8 × 10¹³ m s⁻¹
- 9.4 × 10⁶ m s⁻¹
Show answer
Answer: A. eV = ½mυ², so υ = √(2(e/m)V) = √(2 × 1.76 × 10¹¹ × 500) = √(1.76 × 10¹⁴) = 1.33 × 10⁷ m s⁻¹, about 1.3 × 10⁷ m s⁻¹. (1.76 × 10¹⁴ is υ², not υ.)
-
4. In Millikan's experiment a charged drop is held stationary by the electric field. Which forces act on it then?
- Weight, electric force and viscous force
- Weight and viscous force only
- Electric force and viscous force only
- Weight, upthrust and electric force
Show answer
Answer: D. A stationary drop has no velocity, so there is no viscous (Stokes) force. Its weight is balanced by the upward electric force together with the upthrust of the air.
-
5. Measured charges on five oil drops are 3.2, 4.8, 8.0, 6.4 and 1.6 (all × 10⁻¹⁹ C). What do these results show?
- Charge can take any value
- Charge comes in whole-number multiples of 1.6 × 10⁻¹⁹ C
- The drops all have the same mass
- The charge on a drop depends on its radius only
Show answer
Answer: B. Each value divided by 1.6 × 10⁻¹⁹ C gives a whole number (2, 3, 5, 4 and 1), so charge is quantised in units of e = 1.6 × 10⁻¹⁹ C, exactly Millikan's conclusion.
Sign in to keep track of the lessons you finish.