• Foundation
  • About 15 min
  • 5 practice questions

Corrosion, its prevention, and alloys

Describe the corrosion of silver, copper and iron, explain from an experiment that rusting needs both air and water, list ways to prevent it, and explain how alloys improve the properties of metals.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Describe what corrosion does to silver, copper and iron.
  • Use a three-test-tube experiment to show that iron needs both air and water to rust.
  • Explain galvanising and other methods of prevention, and give the composition and uses of common alloys.

In Chapter 1 you met corrosion as an everyday effect of oxidation. Here we look at it more closely, find out exactly what makes iron rust, and see how mixing metals into alloys can make them stronger, harder or rust-free.

Corrosion of different metals

Corrosion of common metals
MetalWhat you seeWhat forms
SilverTurns blackSilver sulphide, from reaction with sulphur in the air
CopperLoses its brown shine and gets a green coatBasic copper carbonate, from moist carbon dioxide in air
IronGets a brown, flaky coatingRust (hydrated iron(III) oxide)

What does iron need to rust?

Place clean iron nails in three corked test tubes. Tube A: ordinary tap water, so both air and water are present. Tube B: boiled distilled water (boiling removes dissolved air) with a layer of oil on top to stop air dissolving again. Tube C: anhydrous calcium chloride, which absorbs moisture, so the air is dry. After a few days only the nails in tube A have rusted.

The rusting experiment

  • Tube A
    • Air and water present
    • Nails rust
  • Tube B
    • Water but no air (boiled water, oil layer)
    • No rust
  • Tube C
    • Air but no water (calcium chloride dries it)
    • No rust
Conclusion: rusting needs both air (oxygen) and water.

Iron rusts only when both air (oxygen) and water (moisture) are present. Keep either one away and rusting stops.

Preventing corrosion

  • Painting, oiling or greasing, which keep air and moisture off the surface.
  • Galvanising: coating iron or steel with a thin layer of zinc. The article stays protected even if the coating is scratched, because zinc is more reactive than iron and is oxidised in its place.
  • Chrome plating: a thin shiny layer of chromium, as on taps and bicycle handlebars.
  • Anodising: thickening the protective oxide layer on aluminium.
  • Making alloys, such as stainless steel.

Worked example 1: a scratched bucket

A galvanised iron bucket gets a deep scratch that exposes the iron, yet it does not rust near the scratch. Reason: zinc is above iron in the reactivity series, so where air and water reach both metals, zinc reacts first and protects the iron. A painted bucket gives no such protection: once the paint is scratched, the bare iron rusts.

Alloys

An alloy is a homogeneous mixture of two or more metals, or of a metal and a non-metal. It is made by melting the main metal and dissolving the others in it in definite proportions, then cooling. If one of the metals is mercury, the alloy is called an amalgam. Alloying is one of the best ways to improve a metal's properties.

Pure iron is soft and stretches easily when hot, so it is never used pure. With a small amount of carbon (about 0.05%) it becomes hard and strong steel. With nickel and chromium it becomes stainless steel, which is hard and does not rust. An alloy usually has lower electrical conductivity and a lower melting point than its pure metals.

Common alloys
AlloyMade ofUseful because
BrassCopper and zincHarder than copper; used for fittings and decorative items
BronzeCopper and tinHard and resistant to corrosion; used for statues and medals
SolderLead and tinLow melting point; used to join electrical wires
Stainless steelIron with nickel and chromiumHard and does not rust; used for utensils
AmalgamMercury with another metalAny alloy in which one metal is mercury

Worked example 2: purity of gold

Pure gold is called 24 carat gold and is too soft for jewellery, so it is alloyed with silver or copper to harden it. In India, ornaments are commonly made of 22 carat gold: 22 parts pure gold and 2 parts copper or silver out of 24. Percentage of gold = (22 ÷ 24) × 100 = 91.67% (to two decimal places). For 18 carat gold: (18 ÷ 24) × 100 = 75%.

Key takeaways: silver turns black, copper turns green and iron rusts. Iron rusts only with both air and water, as the three-tube experiment shows. Painting, oiling, greasing, galvanising, chrome plating, anodising and alloying all prevent corrosion. Alloys such as brass (Cu + Zn), bronze (Cu + Sn), solder (Pb + Sn) and stainless steel (Fe + Ni + Cr) have improved properties; an alloy with mercury is an amalgam.

Check your understanding

  1. 1. In the rusting experiment, why is boiled distilled water used in one test tube?

    1. Boiling adds oxygen to the water
    2. Boiling removes dissolved air from the water
    3. Boiled water is acidic
    4. Boiled water dries the nails
    Show answer

    Answer: B. Boiling drives out dissolved air. With a layer of oil on top to stop air dissolving again, the nails in that tube have water but no air, and they do not rust.

  2. 2. Galvanised iron is coated with:

    1. Tin
    2. Chromium
    3. Copper
    4. Zinc
    Show answer

    Answer: D. Galvanising means coating iron or steel with a thin layer of zinc, which protects the iron even if the coating is scratched.

  3. 3. Solder is used for joining electrical wires because it:

    1. Has a low melting point
    2. Is a very good conductor of heat
    3. Does not melt at all
    4. Contains mercury
    Show answer

    Answer: A. Solder, an alloy of lead and tin, has a low melting point, so it can be melted easily to join wires.

  4. 4. Bronze is an alloy of:

    1. Copper and zinc
    2. Iron and nickel
    3. Copper and tin
    4. Lead and tin
    Show answer

    Answer: C. Bronze is copper and tin. Brass is copper and zinc; solder is lead and tin.

  5. 5. What is the percentage of pure gold in 18 carat gold?

    1. 70%
    2. 75%
    3. 80%
    4. 90%
    Show answer

    Answer: B. Pure gold is 24 carat. 18 carat means 18 parts gold out of 24: (18 ÷ 24) × 100 = 75%.

Privacy · Terms · Refunds · Delivery