- Foundation
- About 18 min
- 5 practice questions
Occurrence, extraction and refining of metals
Explain minerals, ores and gangue, choose the right method to extract a metal from its position in the reactivity series, and describe roasting, calcination, the thermit reaction, electrolytic reduction and refining.
If something looks wrong, please tell us.
By the end of this lesson you can
- Define mineral, ore and gangue, and say which metals occur free in nature.
- Match the extraction method to a metal's reactivity: heating alone, reduction with carbon, or electrolysis.
- Write equations for roasting, calcination and the thermit reaction, and describe electrolytic refining.
The earth's crust is the main source of metals, and seawater contains soluble salts such as sodium chloride and magnesium chloride. Turning rock into pure metal takes several steps, and the method depends on how reactive the metal is.
Minerals, ores and gangue
Elements or compounds that occur naturally in the earth's crust are minerals. A mineral from which a metal can be extracted profitably is an ore. Mined ore contains unwanted soil, sand and rock called gangue, which is removed first (enrichment or concentration of the ore) using differences in physical or chemical properties.
Metals at the bottom of the series, such as gold, silver, platinum and copper, are found in the free (native) state; copper and silver also occur as sulphide or oxide ores. Metals at the top (K, Na, Ca, Mg, Al) are so reactive that they are never found free. Metals in the middle (Zn, Fe, Pb) occur mostly as oxides, sulphides or carbonates. Many ores are oxides, because oxygen is very reactive and abundant.
Extraction method depends on reactivity
-
High reactivity: K, Na, Ca, Mg, Al
- Electrolysis of molten compounds
- Carbon cannot reduce their oxides
-
Medium reactivity: Zn, Fe, Pb (and Cu)
- Convert to oxide by roasting or calcination
- Reduce the oxide with carbon or a more reactive metal
-
Low reactivity: Hg, Cu, Ag, Au
- Found free, or ores reduced by heating alone
Metals low in the series
Their oxides break down on heating alone. Cinnabar (HgS), an ore of mercury, is heated in air to mercuric oxide, which on further heating gives mercury: 2HgS + 3O₂ → 2HgO + 2SO₂, then 2HgO → 2Hg + O₂. Copper from Cu₂S is obtained similarly: 2Cu₂S + 3O₂ → 2Cu₂O + 2SO₂, then 2Cu₂O + Cu₂S → 6Cu + SO₂.
Metals in the middle
It is easier to get a metal from its oxide than from a sulphide or carbonate, so these ores are first changed into oxides.
Roasting or calcination?
-
Roasting
- For sulphide ores
- Heat strongly in excess air
- 2ZnS + 3O₂ → 2ZnO + 2SO₂
-
Calcination
- For carbonate ores
- Heat strongly in limited air
- ZnCO₃ → ZnO + CO₂
The oxide is then reduced with carbon (coke): ZnO + C → Zn + CO. Obtaining a metal from its compound is always a reduction. Highly reactive metals such as sodium, calcium and aluminium can also act as reducing agents, displacing less reactive metals. These reactions are so exothermic that the metal is produced molten: 3MnO₂ + 4Al → 3Mn + 2Al₂O₃ + heat.
The reaction of iron(III) oxide with aluminium, Fe₂O₃ + 2Al → 2Fe + Al₂O₃ + heat, is the thermit reaction. The molten iron produced is used to join railway tracks and repair cracked machine parts.
Worked example 1: oxidised or reduced?
In 3MnO₂ + 4Al → 3Mn + 2Al₂O₃: MnO₂ loses oxygen and becomes Mn, so it is reduced. Al gains oxygen and becomes Al₂O₃, so it is oxidised. Check the balance: Mn 3 = 3; O 3 × 2 = 6 = 2 × 3; Al 4 = 2 × 2.
Metals at the top
Carbon cannot reduce the oxides of sodium, magnesium, calcium or aluminium, because these metals have a greater attraction for oxygen than carbon does. They are obtained by electrolytic reduction. Sodium, magnesium and calcium are obtained by electrolysing their molten chlorides: the metal forms at the cathode (Na⁺ + e⁻ → Na) and chlorine at the anode (2Cl⁻ → Cl₂ + 2e⁻). Aluminium is obtained by electrolytic reduction of aluminium oxide.
Refining
Metal from these processes is impure. The most widely used purification method is electrolytic refining, used for copper, zinc, tin, nickel, silver, gold and others. The impure metal is the anode, a thin strip of pure metal is the cathode, and a solution of a salt of the metal is the electrolyte (acidified copper sulphate for copper). When current flows, metal from the anode dissolves and an equal amount of pure metal is deposited on the cathode. Soluble impurities go into the solution; insoluble ones settle below the anode as anode mud.
Worked example 2: choose the method
- Zinc blende, ZnS: a sulphide of a middle metal. Roast in excess air to ZnO, then reduce with carbon.
- Calamine, ZnCO₃: a carbonate. Calcine in limited air to ZnO, then reduce with carbon.
- Rock salt, NaCl: sodium is very reactive. Electrolyse molten NaCl; sodium forms at the cathode.
- Cinnabar, HgS: mercury is low in the series. Heat in air; the oxide breaks down on further heating.
Low reactivity: heat alone. Medium reactivity: roast or calcine to the oxide, then reduce with carbon. High reactivity: electrolysis. Then refine: impure metal anode, pure metal cathode.
Key takeaways: ores are minerals worth mining; gangue is removed first. The extraction method follows the reactivity series. Roasting (excess air) treats sulphides; calcination (limited air) treats carbonates. Carbon or a more reactive metal reduces middle-series oxides; the thermit reaction joins rails. Top-series metals need electrolysis of molten compounds. Electrolytic refining deposits pure metal on the cathode and leaves anode mud.
Check your understanding
-
1. The unwanted soil, sand and rock mixed with a mined ore is called:
- Gangue
- Mineral
- Alloy
- Flux
Show answer
Answer: A. Gangue is the impurity that comes with the ore and must be removed before the metal is extracted.
-
2. Which process converts zinc carbonate into zinc oxide?
- Roasting in excess air
- Electrolytic refining
- Calcination in limited air
- Thermit reaction
Show answer
Answer: C. Carbonate ores are changed into oxides by calcination, strong heating in limited air: ZnCO₃ → ZnO + CO₂. Roasting is for sulphide ores.
-
3. Why can sodium not be obtained by heating sodium oxide with carbon?
- Sodium oxide does not exist
- Carbon reacts with sodium to form a carbide
- Sodium is too heavy
- Sodium has a greater attraction for oxygen than carbon has
Show answer
Answer: D. Carbon can only reduce oxides of metals that hold oxygen less strongly than carbon does. Sodium holds oxygen more strongly, so it is extracted by electrolysis of molten sodium chloride.
-
4. In the electrolytic refining of copper, the anode is:
- A thin strip of pure copper
- A block of impure copper
- A carbon rod
- Acidified copper sulphate solution
Show answer
Answer: B. The impure metal is the anode, the pure metal strip is the cathode, and acidified copper sulphate is the electrolyte. Pure copper deposits on the cathode.
-
5. Which reaction is used to join railway tracks?
- Fe₂O₃ + 2Al → 2Fe + Al₂O₃
- ZnO + C → Zn + CO
- 2HgO → 2Hg + O₂
- 2ZnS + 3O₂ → 2ZnO + 2SO₂
Show answer
Answer: A. The thermit reaction between iron(III) oxide and aluminium releases so much heat that the iron formed is molten. The molten iron welds railway tracks and cracked machine parts.
Sign in to keep track of the lessons you finish.