• Foundation
  • About 18 min
  • 5 practice questions

The reactivity series and ionic compounds

Use displacement reactions to build the reactivity series, explain reactivity using electron configurations, show the formation of ionic compounds with electron-dot diagrams, and list their properties.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Use displacement results to place metals in the reactivity series.
  • Show how sodium chloride and magnesium chloride form by transfer of electrons.
  • Explain the melting points, solubility and conductivity of ionic compounds.

Reactions with oxygen, water and acids could not rank every metal; copper, for instance, reacts with none of the dilute acids. Displacement reactions give a cleaner test, and electron arrangements explain why metals react at all.

Displacement and the reactivity series

If metal A displaces metal B from a solution of B's salt, A is more reactive than B. An iron nail in copper sulphate gets coated with copper, but a copper wire in iron sulphate stays unchanged. So iron is more reactive than copper.

Metal A + Salt solution of B → Salt solution of A + Metal B, only if A is more reactive than B. Reactivity series: K > Na > Ca > Mg > Al > Zn > Fe > Pb > [H] > Cu > Hg > Ag > Au.

Metals above hydrogen in the series can displace hydrogen from dilute acids; copper, mercury, silver and gold, below hydrogen, cannot. A handy memory line: 'Please Send Cats, Monkeys And Zebras In Large Herds, Carefully Managed, Seriously Guarded' for K, Na, Ca, Mg, Al, Zn, Fe, Pb, H, Cu, Hg, Ag, Au.

Worked example 1: ranking unknown metals

Metals A, B and C are tested. A displaces B from B's salt solution. C displaces A from A's salt solution. B displaces neither. Reasoning: A > B (A displaces B); C > A (C displaces A). Order: C > A > B, with C the most reactive and B the least.

Why do elements react?

Noble gases such as neon (2, 8) and argon (2, 8, 8) have a completely filled outer shell and are very unreactive. Other elements react to reach a filled outer shell. A metal atom has 1, 2 or 3 outer electrons and loses them to become a positive ion (cation). A non-metal atom has 5, 6 or 7 outer electrons and gains electrons to become a negative ion (anion).

Ions with filled outer shells
AtomElectrons (K, L, M)ChangeIon formed
Sodium, Na2, 8, 1Loses 1 electronNa⁺ (2, 8)
Magnesium, Mg2, 8, 2Loses 2 electronsMg²⁺ (2, 8)
Chlorine, Cl2, 8, 7Gains 1 electronCl⁻ (2, 8, 8)
Oxygen, O2, 6Gains 2 electronsO²⁻ (2, 8)

Forming ionic compounds

Formation of sodium chloride

  1. Sodium atom, 2, 8, 1 Has one electron in its outer shell.
  2. Electron transferred Na gives its outer electron to Cl.
  3. Two ions form Na⁺ (2, 8) and Cl⁻ (2, 8, 8), both with filled shells.
  4. Ions attract Opposite charges hold together as Na⁺Cl⁻.

Worked example 2: magnesium chloride

Magnesium (2, 8, 2) must lose 2 electrons; each chlorine (2, 8, 7) can take only 1. So two chlorine atoms are needed. Electron dot form: Mg with two outer dots gives one dot to each of two Cl atoms (each with seven dots). Result: Mg²⁺ and two Cl⁻ ions, formula MgCl₂. Charges balance: +2 + 2 × (−1) = 0. The cation is Mg²⁺ and the anion is Cl⁻. Likewise, sodium oxide is Na₂O (two Na give one electron each to O) and magnesium oxide is MgO (Mg gives two electrons to one O).

Compounds formed by the transfer of electrons from a metal to a non-metal are called ionic or electrovalent compounds.

Properties of ionic compounds

  • Physical nature: hard solids, because of strong attraction between positive and negative ions; generally brittle, breaking into pieces under pressure.
  • High melting and boiling points: much energy is needed to overcome the strong inter-ionic attraction. Sodium chloride, for example, melts at about 1074 K (801 °C).
  • Solubility: generally soluble in water but insoluble in kerosene and petrol.
  • Conduction: they conduct electricity when dissolved in water or molten, because the ions can move. As solids they do not conduct, because the ions are held in a rigid structure.

Key takeaways: a more reactive metal displaces a less reactive one, which gives the reactivity series K > Na > Ca > Mg > Al > Zn > Fe > Pb > H > Cu > Hg > Ag > Au. Metals lose electrons to form cations; non-metals gain electrons to form anions; the ions attract to form ionic compounds. These are hard, brittle, high-melting, water-soluble solids that conduct only when molten or in solution.

Check your understanding

  1. 1. Which of these reactions will take place?

    1. Cu + FeSO₄ → CuSO₄ + Fe
    2. Fe + ZnSO₄ → FeSO₄ + Zn
    3. Zn + FeSO₄ → ZnSO₄ + Fe
    4. Ag + CuSO₄ → Ag₂SO₄ + Cu
    Show answer

    Answer: C. Zinc is above iron in the reactivity series, so it displaces iron. Copper is below iron, iron is below zinc and silver is below copper, so the other three do not happen.

  2. 2. The electronic configuration of a sodium ion, Na⁺, is:

    1. 2, 8, 1
    2. 2, 8
    3. 2, 8, 2
    4. 2, 8, 8
    Show answer

    Answer: B. Sodium (2, 8, 1) loses its single outer electron to form Na⁺, which has the configuration 2, 8, like neon.

  3. 3. Why do ionic compounds have high melting points?

    1. Strong forces of attraction between oppositely charged ions need much energy to break
    2. They contain only metals
    3. They are always liquids
    4. Their molecules are very small
    Show answer

    Answer: A. In an ionic solid, positive and negative ions are held by strong electrostatic attraction. A large amount of energy is required to overcome it, so the melting and boiling points are high.

  4. 4. Solid sodium chloride does not conduct electricity, but its solution in water does. Why?

    1. Water itself is a very good conductor
    2. Salt forms molecules in water
    3. Electrons flow through solid salt only when wet
    4. In solution the ions are free to move, but in the solid they are fixed in place
    Show answer

    Answer: D. Conduction needs moving charged particles. In the solid the ions are locked in a rigid structure; dissolving (or melting) frees them to move to the electrodes.

  5. 5. Metal P displaces metal Q from its salt solution, and metal R displaces metal P from its salt solution. What is the correct order of reactivity?

    1. P > Q > R
    2. Q > P > R
    3. R > Q > P
    4. R > P > Q
    Show answer

    Answer: D. P displaces Q, so P > Q. R displaces P, so R > P. Together: R > P > Q.

Privacy · Terms · Refunds · Delivery