Revision notes

Chapter 3 Metals and Non-metals: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Physical properties of metals and non-metals

Physical properties of metals
PropertyMeaningExample
Metallic lustreA shiny surface when pure or freshly cleanedPolished copper, silver jewellery
HardnessMost metals are hard; hardness variesIron is hard; sodium can be cut with a knife
MalleabilityCan be beaten into thin sheetsAluminium foil; gold and silver are the most malleable
DuctilityCan be drawn into thin wiresCopper and aluminium wires; gold is the most ductile
Conduction of heatHeat passes through easilySilver and copper are the best; lead and mercury are poor
Conduction of electricityElectric current flows throughCopper and aluminium in electric wires
SonorityMake a ringing sound when struckSchool bells, temple bells
High melting pointMost are solids that melt only at high temperatureIron, copper

Metals and non-metals

  • Metals
    • Lustrous
    • Malleable and ductile
    • Good conductors of heat and electricity
    • Sonorous
    • Mostly solids with high melting points
  • Non-metals
    • Mostly dull
    • Brittle if solid
    • Poor conductors
    • Not sonorous
    • Solids or gases (bromine is a liquid)

Physical properties alone cannot always separate metals from non-metals, because there are exceptions. Chemical properties, such as the nature of the oxide, give a clearer test.

Key takeaways: metals are lustrous, hard, malleable, ductile, sonorous and good conductors with high melting points; non-metals are generally the opposite. Learn the exceptions: mercury (liquid metal), gallium and caesium (low melting), sodium and potassium (soft), iodine (lustrous non-metal), diamond (hardest) and graphite (conducts). Metals give basic oxides; non-metals give acidic oxides.

Read the full lesson

Lesson 2

How metals react with oxygen, water and acids

Metal + Oxygen → Metal oxide. Most metal oxides are basic; aluminium oxide and zinc oxide are amphoteric (they react with both acids and bases).

Reaction with water, from most to least reactive

  1. Potassium, sodium Violent with cold water; hydrogen catches fire. 2Na + 2H₂O → 2NaOH + H₂ + heat
  2. Calcium Less violent with cold water; bubbles make it float. Ca + 2H₂O → Ca(OH)₂ + H₂
  3. Magnesium No reaction with cold water; reacts with hot water and floats
  4. Aluminium, zinc, iron Only with steam. 3Fe + 4H₂O → Fe₃O₄ + 4H₂
  5. Lead, copper, silver, gold Do not react with water at all

Key takeaways: metals form oxides with oxygen; most are basic, but Al₂O₃ and ZnO are amphoteric. Sodium and potassium are kept under kerosene. Reactivity with water falls from K and Na (cold water) through Mg (hot water) and Al, Zn, Fe (steam) to Pb, Cu, Ag, Au (no reaction). With dilute HCl the order is Mg > Al > Zn > Fe, and copper does not react. Nitric acid usually gives nitrogen oxides, not hydrogen.

Read the full lesson

Lesson 3

The reactivity series and ionic compounds

Metal A + Salt solution of B → Salt solution of A + Metal B, only if A is more reactive than B. Reactivity series: K > Na > Ca > Mg > Al > Zn > Fe > Pb > [H] > Cu > Hg > Ag > Au.

Ions with filled outer shells
AtomElectrons (K, L, M)ChangeIon formed
Sodium, Na2, 8, 1Loses 1 electronNa⁺ (2, 8)
Magnesium, Mg2, 8, 2Loses 2 electronsMg²⁺ (2, 8)
Chlorine, Cl2, 8, 7Gains 1 electronCl⁻ (2, 8, 8)
Oxygen, O2, 6Gains 2 electronsO²⁻ (2, 8)

Formation of sodium chloride

  1. Sodium atom, 2, 8, 1 Has one electron in its outer shell.
  2. Electron transferred Na gives its outer electron to Cl.
  3. Two ions form Na⁺ (2, 8) and Cl⁻ (2, 8, 8), both with filled shells.
  4. Ions attract Opposite charges hold together as Na⁺Cl⁻.

Key takeaways: a more reactive metal displaces a less reactive one, which gives the reactivity series K > Na > Ca > Mg > Al > Zn > Fe > Pb > H > Cu > Hg > Ag > Au. Metals lose electrons to form cations; non-metals gain electrons to form anions; the ions attract to form ionic compounds. These are hard, brittle, high-melting, water-soluble solids that conduct only when molten or in solution.

Read the full lesson

Lesson 4

Occurrence, extraction and refining of metals

Extraction method depends on reactivity

  • High reactivity: K, Na, Ca, Mg, Al
    • Electrolysis of molten compounds
    • Carbon cannot reduce their oxides
  • Medium reactivity: Zn, Fe, Pb (and Cu)
    • Convert to oxide by roasting or calcination
    • Reduce the oxide with carbon or a more reactive metal
  • Low reactivity: Hg, Cu, Ag, Au
    • Found free, or ores reduced by heating alone

Roasting or calcination?

  • Roasting
    • For sulphide ores
    • Heat strongly in excess air
    • 2ZnS + 3O₂ → 2ZnO + 2SO₂
  • Calcination
    • For carbonate ores
    • Heat strongly in limited air
    • ZnCO₃ → ZnO + CO₂

Low reactivity: heat alone. Medium reactivity: roast or calcine to the oxide, then reduce with carbon. High reactivity: electrolysis. Then refine: impure metal anode, pure metal cathode.

Key takeaways: ores are minerals worth mining; gangue is removed first. The extraction method follows the reactivity series. Roasting (excess air) treats sulphides; calcination (limited air) treats carbonates. Carbon or a more reactive metal reduces middle-series oxides; the thermit reaction joins rails. Top-series metals need electrolysis of molten compounds. Electrolytic refining deposits pure metal on the cathode and leaves anode mud.

Read the full lesson

Lesson 5

Corrosion, its prevention, and alloys

Corrosion of common metals
MetalWhat you seeWhat forms
SilverTurns blackSilver sulphide, from reaction with sulphur in the air
CopperLoses its brown shine and gets a green coatBasic copper carbonate, from moist carbon dioxide in air
IronGets a brown, flaky coatingRust (hydrated iron(III) oxide)

The rusting experiment

  • Tube A
    • Air and water present
    • Nails rust
  • Tube B
    • Water but no air (boiled water, oil layer)
    • No rust
  • Tube C
    • Air but no water (calcium chloride dries it)
    • No rust
Conclusion: rusting needs both air (oxygen) and water.

Iron rusts only when both air (oxygen) and water (moisture) are present. Keep either one away and rusting stops.

Common alloys
AlloyMade ofUseful because
BrassCopper and zincHarder than copper; used for fittings and decorative items
BronzeCopper and tinHard and resistant to corrosion; used for statues and medals
SolderLead and tinLow melting point; used to join electrical wires
Stainless steelIron with nickel and chromiumHard and does not rust; used for utensils
AmalgamMercury with another metalAny alloy in which one metal is mercury

Key takeaways: silver turns black, copper turns green and iron rusts. Iron rusts only with both air and water, as the three-tube experiment shows. Painting, oiling, greasing, galvanising, chrome plating, anodising and alloying all prevent corrosion. Alloys such as brass (Cu + Zn), bronze (Cu + Sn), solder (Pb + Sn) and stainless steel (Fe + Ni + Cr) have improved properties; an alloy with mercury is an amalgam.

Read the full lesson

Privacy · Terms · Refunds · Delivery