• Foundation
  • About 22 min
  • 5 practice questions

Balancing redox equations: oxidation number and half-reaction methods

Balance redox equations in acidic and basic solution by the oxidation number method and by the half-reaction (ion-electron) method, checking atoms and charge at every step.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Balance a redox equation by matching the increase and decrease in oxidation number.
  • Balance oxidation and reduction half-reactions separately and combine them.
  • Use H⁺ and H₂O in acidic solution, and convert to OH⁻ for basic solution.
  • Check a final equation for atoms and charge.

Many redox equations cannot be balanced by inspection because electrons, water and hydrogen or hydroxide ions all take part. Two systematic methods exist. Both rest on one idea: in any redox reaction, the electrons lost by the reductant must equal the electrons gained by the oxidant.

Total increase in oxidation number = total decrease in oxidation number; electrons lost = electrons gained.

Method A: the oxidation number method

  1. Write the skeletal equation with correct formulas.
  2. Assign oxidation numbers and find the atoms whose numbers change.
  3. Work out the increase and the decrease per formula unit; multiply so that they are equal, and balance those atoms.
  4. In water, balance the ionic charge by adding H⁺ (acidic solution) or OH⁻ (basic solution).
  5. Balance hydrogen by adding H₂O, then check that oxygen also balances.

Worked example 1: permanganate and iron(II) in acid

Skeletal: MnO₄⁻ + Fe²⁺ → Mn²⁺ + Fe³⁺. Step 2: Mn falls from +7 to +2 (decrease 5); Fe rises from +2 to +3 (increase 1). Step 3: take 5Fe²⁺ to make the increase 5: MnO₄⁻ + 5Fe²⁺ → Mn²⁺ + 5Fe³⁺. Step 4: charge on the left = −1 + 10 = +9; on the right = +2 + 15 = +17. Add 8H⁺ on the left: +9 + 8 = +17. Step 5: 8 H on the left need 4H₂O on the right. Oxygen check: 4 on the left (in MnO₄⁻), 4 on the right (in 4H₂O). Final: MnO₄⁻ + 5Fe²⁺ + 8H⁺ → Mn²⁺ + 5Fe³⁺ + 4H₂O.

Worked example 2: copper and nitrate in acid

Skeletal: Cu + NO₃⁻ → Cu²⁺ + NO. Cu rises 0 → +2 (increase 2); N falls +5 → +2 (decrease 3). The lowest common multiple is 6, so take 3Cu and 2NO₃⁻: 3Cu + 2NO₃⁻ → 3Cu²⁺ + 2NO. Charge: left −2, right +6; add 8H⁺ on the left to make +6. Then 8 H need 4H₂O on the right. Oxygen: left 6; right 2 + 4 = 6. Final: 3Cu + 2NO₃⁻ + 8H⁺ → 3Cu²⁺ + 2NO + 4H₂O. This is the reaction of copper with dilute nitric acid.

Method B: the half-reaction (ion-electron) method

Steps of the half-reaction method

  1. Write the ionic skeleton Show only the species that change.
  2. Split into two halves One oxidation half and one reduction half.
  3. Balance atoms other than O and H Use coefficients in each half.
  4. Balance O and H Add H₂O for O, then H⁺ for H (acidic solution).
  5. Balance charge with electrons Add e⁻ to the more positive side of each half.
  6. Equalise electrons and add Multiply the halves, add, cancel e⁻, H⁺ and H₂O.
  7. Basic solution only Add OH⁻ equal to H⁺ on both sides; H⁺ + OH⁻ = H₂O.

Worked example 3: permanganate and oxalate in acid

Skeletal: MnO₄⁻ + C₂O₄²⁻ → Mn²⁺ + CO₂. Oxidation half: C₂O₄²⁻ → 2CO₂; charge left −2, right 0, so add 2e⁻ on the right: C₂O₄²⁻ → 2CO₂ + 2e⁻. Reduction half: MnO₄⁻ → Mn²⁺ + 4H₂O (4 O balanced), then add 8H⁺ on the left: MnO₄⁻ + 8H⁺ → Mn²⁺ + 4H₂O. Charge left +7, right +2, so add 5e⁻ on the left: MnO₄⁻ + 8H⁺ + 5e⁻ → Mn²⁺ + 4H₂O. Equalise: multiply the oxidation half by 5 and the reduction half by 2 (10 electrons each). Add: 2MnO₄⁻ + 5C₂O₄²⁻ + 16H⁺ → 2Mn²⁺ + 10CO₂ + 8H₂O. Check: charge left −2 − 10 + 16 = +4, right +4; O left 8 + 20 = 28, right 20 + 8 = 28; H 16 = 16.

Worked example 4: permanganate and sulphite in basic solution

Skeletal: MnO₄⁻ + SO₃²⁻ → MnO₂ + SO₄²⁻. First balance as if acidic. Reduction: MnO₄⁻ + 4H⁺ + 3e⁻ → MnO₂ + 2H₂O. Oxidation: SO₃²⁻ + H₂O → SO₄²⁻ + 2H⁺ + 2e⁻. Multiply by 2 and 3 to match 6 electrons and add: 2MnO₄⁻ + 8H⁺ + 3SO₃²⁻ + 3H₂O → 2MnO₂ + 4H₂O + 3SO₄²⁻ + 6H⁺, which simplifies to 2MnO₄⁻ + 3SO₃²⁻ + 2H⁺ → 2MnO₂ + 3SO₄²⁻ + H₂O. Convert to basic: add 2OH⁻ to both sides; 2H⁺ + 2OH⁻ = 2H₂O on the left; cancel one H₂O. Final: 2MnO₄⁻ + 3SO₃²⁻ + H₂O → 2MnO₂ + 3SO₄²⁻ + 2OH⁻. Check: charge −8 = −8; O 8 + 9 + 1 = 18 and 4 + 12 + 2 = 18; H 2 = 2.

Comparing the two balancing methods
FeatureOxidation number methodHalf-reaction method
Starting pointChanges in oxidation numberSeparate oxidation and reduction halves
Electrons shown?No, only number changesYes, in each half-reaction
Best forQuick balancing of whole equationsIonic reactions in solution; electrode reactions
Final checkAtoms and chargeAtoms and charge

Common mistakes to avoid: using OH⁻ in an acidic medium (or H⁺ in a basic one), forgetting to multiply the oxidation number change by the number of atoms that change (for Cr₂O₇²⁻ → 2Cr³⁺ the decrease is 2 × 3 = 6), and stopping before checking charge. A balanced redox equation must balance both atoms and charge.

Key takeaways

  • Both methods depend on electrons lost = electrons gained.
  • Oxidation number method: equalise increase and decrease, then balance charge with H⁺ or OH⁻ and hydrogen with H₂O.
  • Half-reaction method: balance each half for atoms (H₂O for O, H⁺ for H) and charge (e⁻), equalise electrons and add.
  • For a basic solution, balance as acidic and then add OH⁻ equal to the H⁺ on both sides.
  • Always finish by checking atoms and total charge.

Check your understanding

  1. 1. In acidic solution, how many electrons appear in the balanced half-reaction for MnO₄⁻ → Mn²⁺?

    1. 3
    2. 5
    3. 7
    4. 8
    Show answer

    Answer: B. MnO₄⁻ + 8H⁺ + 5e⁻ → Mn²⁺ + 4H₂O. Mn goes from +7 to +2, a gain of 5 electrons. Charge check: left −1 + 8 − 5 = +2, right +2.

  2. 2. Dichromate oxidises iodide in acid: Cr₂O₇²⁻ + I⁻ → Cr³⁺ + I₂. In the balanced equation, how many moles of I₂ are formed per mole of Cr₂O₇²⁻?

    1. 1
    2. 2
    3. 6
    4. 3
    Show answer

    Answer: D. Reduction: Cr₂O₇²⁻ + 14H⁺ + 6e⁻ → 2Cr³⁺ + 7H₂O (6 electrons). Oxidation: 2I⁻ → I₂ + 2e⁻; ×3 gives 6I⁻ → 3I₂ + 6e⁻. Overall: Cr₂O₇²⁻ + 6I⁻ + 14H⁺ → 2Cr³⁺ + 3I₂ + 7H₂O, so 3 mol I₂ per mole of dichromate.

  3. 3. When balancing a half-reaction for basic solution by the half-reaction method, what is done after balancing it as if it were acidic?

    1. Remove all water molecules
    2. Replace every H⁺ by OH⁻ on the same side
    3. Add as many OH⁻ ions as there are H⁺ ions to both sides, then combine H⁺ and OH⁻ into H₂O
    4. Double all coefficients
    Show answer

    Answer: C. Adding the same number of OH⁻ to both sides keeps the equation balanced. Each H⁺ + OH⁻ pair becomes H₂O, removing H⁺ from the equation, and extra water is then cancelled.

  4. 4. By the oxidation number method, H₂S + NO₃⁻ → S + NO (acidic). What is the ratio of coefficients H₂S : NO₃⁻ in the balanced equation?

    1. 3 : 2
    2. 2 : 3
    3. 1 : 1
    4. 5 : 2
    Show answer

    Answer: A. S rises from −2 to 0 (increase 2); N falls from +5 to +2 (decrease 3). LCM 6: 3H₂S and 2NO₃⁻. Balanced: 3H₂S + 2NO₃⁻ + 2H⁺ → 3S + 2NO + 4H₂O (charge 0 = 0; H 8 = 8; O 6 = 6).

  5. 5. Assertion (A): In acidic solution, H₂O is added to the side short of oxygen when balancing a half-reaction.
    Reason (R): In acidic solution, OH⁻ ions are used to balance hydrogen atoms.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: C. A is true: water supplies oxygen atoms. R is false: in acidic solution hydrogen is balanced with H⁺ ions; OH⁻ is used only when the solution is basic.

Privacy · Terms · Refunds · Delivery