- Foundation
- About 20 min
- 5 practice questions
Oxidation number: rules, Stock notation and redox by oxidation number
Assign oxidation numbers with a consistent set of rules, write names in Stock notation, explain fractional (average) oxidation numbers, and use changes in oxidation number to identify oxidation, reduction, oxidants and reductants.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain why oxidation numbers are needed for reactions of covalent compounds.
- Apply the rules to find the oxidation number of any element in a molecule or ion.
- Write compound names and formulas in Stock notation.
- Explain what a fractional oxidation number really means.
- Define oxidation, reduction, oxidant and reductant in terms of oxidation number.
In 2H₂ (g) + O₂ (g) → 2H₂O (l), no ions are formed. Water is a covalent molecule, and electrons are only partly shifted from hydrogen towards the more electronegative oxygen. Yet this is clearly an oxidation of hydrogen. To keep track of such partial electron shifts, chemists use a book-keeping device called the oxidation number.
What an oxidation number is
The oxidation number (or oxidation state) of an element in a substance is the charge its atom would carry if every shared electron pair were handed over completely to the more electronegative atom of the bond. It is a bookkeeping charge, not a real one. In H₂O, both bonding pairs are assigned to oxygen, so oxygen is −2 and each hydrogen is +1. In HCl, chlorine is −1 and hydrogen +1. In CH₄, carbon is more electronegative than hydrogen, so carbon is −4.
Rules for assigning oxidation numbers
| Rule | What it says | Examples |
|---|---|---|
| 1 | An atom in an uncombined element has oxidation number 0 | Fe, Cl₂, O₃, P₄, S₈: all 0 |
| 2 | A monatomic ion has oxidation number equal to its charge; alkali metals are +1 and alkaline earth metals +2 in compounds; Al is +3 | Ca²⁺ is +2, Br⁻ is −1 |
| 3 | Oxygen is usually −2; it is −1 in peroxides, −½ in superoxides, and positive when bonded to fluorine | H₂O₂, BaO₂: −1; KO₂: −½; OF₂: +2; O₂F₂: +1 |
| 4 | Hydrogen is +1, except −1 in binary metal hydrides | HCl: +1; NaH, CaH₂: −1 |
| 5 | Fluorine is always −1; Cl, Br, I are −1 as halide ions but positive with oxygen | KF: −1; HClO₄: Cl is +7 |
| 6 | The oxidation numbers in a neutral compound add up to 0; in an ion they add up to the ion's charge | In SO₄²⁻: x + 4(−2) = −2 |
When a formula contains several atoms of the same element, the rules give their average oxidation number. Metals show only positive oxidation numbers; non-metals can show positive or negative ones; transition metals usually show several positive values. For representative elements, the highest oxidation number equals the group number for groups 1 and 2, and the group number minus 10 for groups 13 to 17, so it rises across a period.
| Group | 1 | 2 | 13 | 14 | 15 | 16 | 17 |
|---|---|---|---|---|---|---|---|
| Element | Na | Mg | Al | Si | P | S | Cl |
| Example compound | Na₂O | MgCl₂ | Al₂O₃ | SiO₂ | H₃PO₄ | H₂SO₄ | HClO₄ |
| Highest oxidation number | +1 | +2 | +3 | +4 | +5 | +6 | +7 |
Finding an unknown oxidation number
- Write the formula Note whether it is a neutral compound or an ion, and its charge.
- Fix the known values Use the rules for O, H, F, alkali and alkaline earth metals.
- Let the unknown be x Multiply each oxidation number by the number of atoms.
- Set the sum Total = 0 for a compound, or the ion's charge for an ion.
- Solve for x If x is a fraction, it is an average over atoms in different states.
Worked example 1: three standard calculations
Mn in KMnO₄: (+1) + x + 4(−2) = 0, so x − 7 = 0 and x = +7. Cr in Cr₂O₇²⁻: 2x + 7(−2) = −2, so 2x = 12 and x = +6. S in Na₂S₂O₃: 2(+1) + 2x + 3(−2) = 0, so 2x = 4 and x = +2 (an average over the two sulphur atoms).
Worked example 2: the many states of nitrogen
NH₄⁺: x + 4(+1) = +1, so x = −3. N₂O: 2x + (−2) = 0, so x = +1. NO₂⁻: x + 2(−2) = −1, so x = +3. HNO₃: (+1) + x + 3(−2) = 0, so x = +5. Nitrogen ranges from −3 to +5, a span of eight units, which matches its five valence electrons (it can gain three or lose up to five).
Stock notation
The German chemist Alfred Stock suggested showing the oxidation number of a metal as a Roman numeral in brackets after its symbol or name. This removes the confusion of old names such as ferrous and ferric. For example, FeCl₂ is iron(II) chloride, written Fe(II)Cl₂; FeCl₃ is iron(III) chloride, Fe(III)Cl₃; CuCl is copper(I) chloride, Cu(I)Cl; SnO₂ is tin(IV) oxide, Sn(IV)O₂; and Mn₂O₇ is manganese(VII) oxide. Comparing two such names tells you at once which is the oxidised form: Fe(III) is the oxidised form of Fe(II).
Fractional oxidation numbers
Sometimes the calculation gives a fraction. In Fe₃O₄, 3x + 4(−2) = 0 gives x = +8/3. But electrons cannot be transferred in fractions. The fraction is only an average: Fe₃O₄ actually contains one Fe²⁺ and two Fe³⁺ ions, and (2 + 3 + 3)/3 = 8/3. Similarly, in the tetrathionate ion S₄O₆²⁻ the average for sulphur is +2.5, but its structure shows the two end sulphur atoms at +5 and the two middle ones at 0. In carbon suboxide, C₃O₂, the average is +4/3, while the real states are +2, 0 and +2. The structure, not the average, tells the true story.
Redox defined by oxidation number
Oxidation is an increase in oxidation number; reduction is a decrease. An oxidant lowers its own oxidation number by raising another's; a reductant raises its own by lowering another's. A redox reaction is one in which oxidation numbers change.
Worked example 3: using oxidation numbers to analyse a reaction
MnO₂ (s) + 4HCl (aq) → MnCl₂ (aq) + Cl₂ (g) + 2H₂O (l). Assign numbers: Mn is +4 in MnO₂ and +2 in MnCl₂, a decrease of 2, so manganese is reduced and MnO₂ is the oxidant. Chlorine is −1 in HCl; two of the four chlorine atoms stay −1 in MnCl₂, but two become 0 in Cl₂, an increase, so HCl is oxidised and acts as the reductant. Check: decrease of 2 (one Mn) equals increase of 2 × 1 (two Cl atoms). Hydrogen (+1) and oxygen (−2) do not change.
Key takeaways
- Oxidation number is a bookkeeping charge found by giving each shared pair to the more electronegative atom.
- Six rules (elements 0, ions = charge, O usually −2, H usually +1, F always −1, sums equal the overall charge) give any oxidation number.
- Stock notation shows a metal's oxidation number in Roman numerals, e.g. iron(III) oxide.
- A fractional oxidation number is an average over atoms that are really in different whole-number states.
- Oxidation is an increase in oxidation number; reduction is a decrease.
Check your understanding
-
1. What is the oxidation number of chromium in K₂Cr₂O₇?
- +3
- +6
- +7
- +12
Show answer
Answer: B. 2(+1) + 2x + 7(−2) = 0, so 2 + 2x − 14 = 0, giving 2x = 12 and x = +6. (+12 is the total for both Cr atoms, not each one.)
-
2. What is the oxidation number of oxygen in OF₂?
- −2
- −1
- +1
- +2
Show answer
Answer: D. Fluorine is more electronegative than oxygen and is always −1. So x + 2(−1) = 0 and x = +2. This is one of the exceptions to oxygen's usual −2.
-
3. The average oxidation number of iron in Fe₃O₄ is:
- +2
- +3
- +8/3
- +3/8
Show answer
Answer: C. 3x + 4(−2) = 0, so 3x = 8 and x = +8/3. In reality Fe₃O₄ contains one Fe(II) and two Fe(III): (2 + 3 + 3)/3 = 8/3.
-
4. How is tin(IV) chloride written in Stock notation?
- Sn(IV)Cl₄
- Sn(II)Cl₄
- Sn(IV)Cl₂
- Sn₄Cl
Show answer
Answer: A. Tin(IV) means Sn has oxidation number +4. With chloride at −1, four Cl⁻ are needed: +4 + 4(−1) = 0, so the formula is SnCl₄, written Sn(IV)Cl₄.
-
5. Assertion (A): The oxidation number of sulphur in S₄O₆²⁻ works out to +2.5.
Reason (R): Electrons can be transferred between atoms in fractions.- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: C. 4x + 6(−2) = −2 gives 4x = 10 and x = +2.5, so A is true as an average. R is false: electrons are never transferred in fractions. The +2.5 is the average of the real states +5, 0, 0 and +5 found from the ion's structure.
Sign in to keep track of the lessons you finish.