Revision notes

Chapter 7 Redox Reactions: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Oxidation and reduction: from oxygen transfer to electron transfer

Classical definitions of oxidation and reduction
ProcessOxygen / electronegative elementHydrogen / electropositive element
OxidationAdded to the substanceRemoved from the substance
ReductionRemoved from the substanceAdded to the substance

Oxidation is loss of electrons; reduction is gain of electrons. The reducing agent donates electrons and is oxidised; the oxidising agent accepts electrons and is reduced.

Two ways of describing the same redox change

  • Classical view
    • Oxidation: gain of O or electronegative element, loss of H or electropositive element
    • Reduction: the reverse
    • Works well for combustion and ore reduction
    • Unclear for reactions such as 2Li + H₂ → 2LiH
  • Electronic view
    • Oxidation: loss of electrons
    • Reduction: gain of electrons
    • Shows electrons in half-reactions
    • Applies to any reaction forming ions
  • Oxidation and reduction always occur together; such reactions are redox reactions.
  • Classically, oxidation is addition of oxygen or an electronegative element, or removal of hydrogen or an electropositive element; reduction is the reverse.
  • Electronically, oxidation is loss of electrons and reduction is gain of electrons, shown clearly in half-reactions.
  • The oxidant accepts electrons and is reduced; the reductant donates electrons and is oxidised.
  • Metal-in-solution experiments rank metals by their tendency to release electrons, for example Zn > Cu > Ag.
Read the full lesson

Lesson 2

Oxidation number: rules, Stock notation and redox by oxidation number

Rules used to find oxidation numbers
RuleWhat it saysExamples
1An atom in an uncombined element has oxidation number 0Fe, Cl₂, O₃, P₄, S₈: all 0
2A monatomic ion has oxidation number equal to its charge; alkali metals are +1 and alkaline earth metals +2 in compounds; Al is +3Ca²⁺ is +2, Br⁻ is −1
3Oxygen is usually −2; it is −1 in peroxides, −½ in superoxides, and positive when bonded to fluorineH₂O₂, BaO₂: −1; KO₂: −½; OF₂: +2; O₂F₂: +1
4Hydrogen is +1, except −1 in binary metal hydridesHCl: +1; NaH, CaH₂: −1
5Fluorine is always −1; Cl, Br, I are −1 as halide ions but positive with oxygenKF: −1; HClO₄: Cl is +7
6The oxidation numbers in a neutral compound add up to 0; in an ion they add up to the ion's chargeIn SO₄²⁻: x + 4(−2) = −2
Highest oxidation numbers across Period 3
Group121314151617
ElementNaMgAlSiPSCl
Example compoundNa₂OMgCl₂Al₂O₃SiO₂H₃PO₄H₂SO₄HClO₄
Highest oxidation number+1+2+3+4+5+6+7

Finding an unknown oxidation number

  1. Write the formula Note whether it is a neutral compound or an ion, and its charge.
  2. Fix the known values Use the rules for O, H, F, alkali and alkaline earth metals.
  3. Let the unknown be x Multiply each oxidation number by the number of atoms.
  4. Set the sum Total = 0 for a compound, or the ion's charge for an ion.
  5. Solve for x If x is a fraction, it is an average over atoms in different states.

Oxidation is an increase in oxidation number; reduction is a decrease. An oxidant lowers its own oxidation number by raising another's; a reductant raises its own by lowering another's. A redox reaction is one in which oxidation numbers change.

  • Oxidation number is a bookkeeping charge found by giving each shared pair to the more electronegative atom.
  • Six rules (elements 0, ions = charge, O usually −2, H usually +1, F always −1, sums equal the overall charge) give any oxidation number.
  • Stock notation shows a metal's oxidation number in Roman numerals, e.g. iron(III) oxide.
  • A fractional oxidation number is an average over atoms that are really in different whole-number states.
  • Oxidation is an increase in oxidation number; reduction is a decrease.
Read the full lesson

Lesson 3

Types of redox reactions: combination, decomposition, displacement, disproportionation

Disproportionation: one element in one intermediate oxidation state is oxidised and reduced at the same time, so it needs at least three possible oxidation states.

Main types of redox reactions

  • Combination
    • A + B → C
    • At least one reactant is an element
    • All combustions
  • Decomposition
    • C → A + B
    • At least one product is an element
    • Not all decompositions are redox
  • Displacement
    • X + YZ → XZ + Y
    • Metal displacement
    • Hydrogen displacement
    • Halogen displacement
  • Disproportionation
    • Same element oxidised and reduced
    • Needs an intermediate oxidation state
    • E.g. H₂O₂, Cl₂ in alkali, Cu⁺
  • Combination and decomposition are redox only when an element is a reactant or product.
  • A more active metal displaces a less active one; very active metals displace hydrogen from cold water, others from steam or acids.
  • Oxidising power of halogens: F₂ > Cl₂ > Br₂ > I₂; F⁻ can be oxidised to F₂ only by electrolysis.
  • Disproportionation needs an element in an intermediate oxidation state; F₂ and species in the highest or lowest state cannot disproportionate.
Read the full lesson

Lesson 4

Balancing redox equations: oxidation number and half-reaction methods

Total increase in oxidation number = total decrease in oxidation number; electrons lost = electrons gained.

Steps of the half-reaction method

  1. Write the ionic skeleton Show only the species that change.
  2. Split into two halves One oxidation half and one reduction half.
  3. Balance atoms other than O and H Use coefficients in each half.
  4. Balance O and H Add H₂O for O, then H⁺ for H (acidic solution).
  5. Balance charge with electrons Add e⁻ to the more positive side of each half.
  6. Equalise electrons and add Multiply the halves, add, cancel e⁻, H⁺ and H₂O.
  7. Basic solution only Add OH⁻ equal to H⁺ on both sides; H⁺ + OH⁻ = H₂O.
Comparing the two balancing methods
FeatureOxidation number methodHalf-reaction method
Starting pointChanges in oxidation numberSeparate oxidation and reduction halves
Electrons shown?No, only number changesYes, in each half-reaction
Best forQuick balancing of whole equationsIonic reactions in solution; electrode reactions
Final checkAtoms and chargeAtoms and charge
  • Both methods depend on electrons lost = electrons gained.
  • Oxidation number method: equalise increase and decrease, then balance charge with H⁺ or OH⁻ and hydrogen with H₂O.
  • Half-reaction method: balance each half for atoms (H₂O for O, H⁺ for H) and charge (e⁻), equalise electrons and add.
  • For a basic solution, balance as acidic and then add OH⁻ equal to the H⁺ on both sides.
  • Always finish by checking atoms and total charge.
Read the full lesson

Lesson 5

Redox titrations, redox couples and standard electrode potentials

The circuit in a Daniell cell

  1. Zinc electrode Zn → Zn²⁺ + 2e⁻ (oxidation, anode).
  2. External wire Electrons flow from the zinc rod to the copper rod.
  3. Copper electrode Cu²⁺ + 2e⁻ → Cu (reduction, cathode).
  4. Salt bridge Ions migrate between the solutions, keeping each electrically neutral and completing the circuit.

Then back to step 1: Zinc electrode

Selected standard electrode potentials (standard accepted values)
Couple (reduction)E° / V at 298 K
F₂ + 2e⁻ → 2F⁻+2.87
MnO₄⁻ + 8H⁺ + 5e⁻ → Mn²⁺ + 4H₂O+1.51
Cl₂ + 2e⁻ → 2Cl⁻+1.36
Br₂ + 2e⁻ → 2Br⁻+1.09
Ag⁺ + e⁻ → Ag+0.80
Fe³⁺ + e⁻ → Fe²⁺+0.77
I₂ + 2e⁻ → 2I⁻+0.54
Cu²⁺ + 2e⁻ → Cu+0.34
2H⁺ + 2e⁻ → H₂0.00
Fe²⁺ + 2e⁻ → Fe−0.44
Zn²⁺ + 2e⁻ → Zn−0.76
Mg²⁺ + 2e⁻ → Mg−2.36
Li⁺ + e⁻ → Li−3.05

The oxidised form of a couple with higher E° can oxidise the reduced form of any couple with lower E°.

  • Redox titrations use permanganate as its own indicator, diphenylamine with dichromate, or starch in iodine-thiosulphate titrations.
  • Titration calculations use the mole ratio from the balanced redox equation.
  • A redox couple is the oxidised and reduced forms of one substance, e.g. Cu²⁺/Cu; the Daniell cell joins Zn²⁺/Zn and Cu²⁺/Cu through a wire and a salt bridge.
  • Standard electrode potentials are measured against the hydrogen electrode (0.00 V) at 298 K and unit concentration.
  • Higher E° means a stronger oxidant; lower E° means a stronger reductant.
Read the full lesson

Privacy · Terms · Refunds · Delivery