Revision notes

Chapter 9 Hydrocarbons: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Classification of hydrocarbons; alkanes: naming, isomers and preparation

Classification of hydrocarbons

  • Saturated
    • Alkanes (open chain), CₙH₂ₙ₊₂
    • Cycloalkanes (rings), CₙH₂ₙ
  • Unsaturated
    • Alkenes, C=C, CₙH₂ₙ
    • Alkynes, C≡C, CₙH₂ₙ₋₂
  • Aromatic
    • Benzenoid: benzene, toluene, naphthalene
    • Non-benzenoid aromatic rings
Classifying carbon atoms
Carbon typeJoined to how many other C atomsExample (in 2-methylbutane, CH₃–CH(CH₃)–CH₂–CH₃)
Primary (1°)One (or none, as in methane)Every CH₃ carbon: three of them
Secondary (2°)TwoThe CH₂ carbon
Tertiary (3°)ThreeThe CH carbon
Quaternary (4°)FourNone here; the central C of 2,2-dimethylpropane

Decarboxylation with soda lime: one carbon fewer than the acid salt. Wurtz and Kolbe: two alkyl groups join, so the product has twice the carbons of one alkyl group.

  • Hydrocarbons are saturated (alkanes, cycloalkanes), unsaturated (alkenes, alkynes) or aromatic.
  • Alkanes, CₙH₂ₙ₊₂, have sp³ carbons with 109.5° bond angles; C₄H₁₀ has 2 chain isomers, C₅H₁₂ 3, C₆H₁₄ 5.
  • Carbon atoms are primary, secondary, tertiary or quaternary according to how many carbons they are bonded to.
  • Alkanes are made by hydrogenation, Zn/HCl reduction of alkyl halides, the Wurtz reaction, decarboxylation and Kolbe's electrolysis.
Read the full lesson

Lesson 2

Alkanes: properties, halogenation mechanism, combustion and conformations

Branching lowers the boiling point
Isomer of C₅H₁₂ShapeBoiling point / K
PentaneStraight chain309.1
2-MethylbutaneOne branch301
2,2-DimethylpropaneNearly spherical282.5

Free radical chlorination of methane

  1. Initiation Light breaks the weakest bond, Cl–Cl, by homolysis: Cl₂ → 2Cl•.
  2. Propagation (a) Cl• + CH₄ → •CH₃ + HCl.
  3. Propagation (b) •CH₃ + Cl₂ → CH₃Cl + Cl•; the new Cl• repeats step (a), forming a chain.
  4. Termination Radicals pair up: Cl• + Cl• → Cl₂; •CH₃ + •CH₃ → C₂H₆; •CH₃ + Cl• → CH₃Cl.

CₙH₂ₙ₊₂ + (3n + 1)/2 O₂ → n CO₂ + (n + 1) H₂O

Conformations of ethane

  • Staggered
    • H atoms on the two carbons as far apart as possible
    • Dihedral angle 60° in Newman projection
    • Least torsional strain
    • Most stable
  • Eclipsed
    • H atoms directly behind one another
    • Dihedral angle 0°
    • Maximum torsional strain
    • Least stable, about 12.5 kJ mol⁻¹ higher
  • Boiling points rise with chain length and fall with branching.
  • Halogenation is a free radical chain reaction: initiation, propagation, termination.
  • Combustion: CₙH₂ₙ₊₂ + (3n + 1)/2 O₂ → nCO₂ + (n + 1)H₂O, releasing much heat.
  • Controlled oxidation, isomerisation, aromatisation, steam reforming and cracking turn alkanes into useful products.
  • Staggered ethane is more stable than eclipsed by about 12.5 kJ mol⁻¹, a small barrier, so rotation is almost free.
Read the full lesson

Lesson 3

Alkenes: structure, isomerism, preparation and addition of HX (Markovnikov rule)

Cis-trans isomerism needs restricted rotation (a C=C bond) and two different groups on each doubly bonded carbon. If either carbon carries two identical groups, there is no cis-trans pair.

Adding HBr to propene

  • Without peroxide
    • Electrophilic addition
    • H⁺ adds first, giving the more stable 2° carbocation
    • Br⁻ joins C-2
    • Major product: 2-bromopropane
  • With peroxide
    • Free radical addition
    • Br• adds first, giving the more stable 2° radical
    • Br ends up on C-1
    • Major product: 1-bromopropane
    • Seen only with HBr
  • Alkenes (CₙH₂ₙ) have sp² carbons; C=C is one σ bond plus one weaker π bond, about 134 pm long.
  • They show position and chain isomerism, and cis-trans isomerism when each doubly bonded carbon has two different groups.
  • Alkenes are made from alkynes (Lindlar: cis; Na/liquid NH₃: trans), alkyl halides, vicinal dihalides and alcohols.
  • Bromine water or Br₂ in CCl₄ is decolourised by alkenes (test for unsaturation).
  • HX adds by Markovnikov's rule through the more stable carbocation; with peroxide, HBr alone adds anti-Markovnikov by a free radical path.
Read the full lesson

Lesson 4

More reactions of alkenes, and alkynes: structure, acidity and additions

Ozonolysis rule: cut the C=C and put =O on each carbon. Reverse it to find an alkene: join the two carbonyl carbons with a double bond and remove the oxygens.

Carbon-carbon bonds compared
BondHybridisation of CBond length / pmBond enthalpy / kJ mol⁻¹
C–C (ethane)sp³154348
C=C (ethene)sp²134681
C≡C (ethyne)sp120823

Acidity: HC≡CH > CH₂=CH₂ > CH₃–CH₃ (s character 50% > 33% > 25%); and HC≡CH > CH₃–C≡CH >> CH₃–C≡C–CH₃.

From limestone to benzene

  1. Limestone, CaCO₃ Heat strongly: CaCO₃ → CaO + CO₂.
  2. Quicklime, CaO Heat with coke: CaO + 3C → CaC₂ + CO.
  3. Calcium carbide, CaC₂ Add water: CaC₂ + 2H₂O → Ca(OH)₂ + C₂H₂.
  4. Ethyne, C₂H₂ Pass through a red-hot iron tube at 873 K.
  5. Benzene, C₆H₆ 3C₂H₂ → C₆H₆: an aliphatic starting material becomes aromatic.
  • H₂SO₄ and water add to alkenes by Markovnikov's rule; Baeyer's reagent gives glycols and is a test for unsaturation.
  • Ozonolysis turns each =C into C=O and is used to locate double bonds.
  • Alkynes (CₙH₂ₙ₋₂) have sp carbons, a linear shape and one σ + two π bonds in C≡C.
  • Ethyne is made from CaC₂ and water, or from vicinal dihalides with alcoholic KOH then NaNH₂.
  • Terminal alkynes are weakly acidic because sp carbon is more electronegative; alkynes add two molecules of H₂, X₂ or HX, and water with HgSO₄/H₂SO₄ gives carbonyl compounds.
Read the full lesson

Lesson 5

Aromatic hydrocarbons: benzene, aromaticity, electrophilic substitution and directive influence

Electrophilic substitution of benzene
ReactionReagentElectrophileProduct from benzene
NitrationConc. HNO₃ + conc. H₂SO₄ (nitrating mixture), heatNO₂⁺ (nitronium ion)Nitrobenzene, C₆H₅NO₂
HalogenationCl₂ with anhydrous FeCl₃ or AlCl₃ (or Br₂/FeBr₃)Cl⁺Chlorobenzene, C₆H₅Cl
SulphonationFuming H₂SO₄ (oleum), heatSO₃Benzenesulphonic acid, C₆H₅SO₃H
Friedel-Crafts alkylationCH₃Cl + anhydrous AlCl₃CH₃⁺Toluene, C₆H₅CH₃
Friedel-Crafts acylationCH₃COCl (or (CH₃CO)₂O) + anhydrous AlCl₃CH₃CO⁺ (acylium ion)Acetophenone, C₆H₅COCH₃

Mechanism of electrophilic substitution

  1. Generate the electrophile Lewis acid AlCl₃: Cl₂ + AlCl₃ → Cl⁺ + [AlCl₄]⁻. Nitration: HNO₃ accepts H⁺ from H₂SO₄, then loses H₂O to give NO₂⁺.
  2. Attack on the ring E⁺ bonds to one carbon, giving a resonance-stabilised carbocation (σ-complex or arenium ion); that carbon becomes sp³ and aromaticity is lost.
  3. Loss of a proton [AlCl₄]⁻ or HSO₄⁻ removes H⁺ from the sp³ carbon, restoring the aromatic ring.

CₓHᵧ + (x + y/4) O₂ → x CO₂ + (y/2) H₂O

How substituents direct a new group

  • Ortho/para, activating
    • –OH, –NH₂, –OCH₃, –CH₃
    • Push electron density into the ring
    • React faster than benzene
  • Ortho/para, deactivating
    • –Cl, –Br, –I
    • Strong –I effect; resonance favours o/p
    • React slower than benzene
  • Meta, deactivating
    • –NO₂, –CN, –CHO, –COOH, –SO₃H
    • Withdraw electron density, most from o/p
    • React slower than benzene
  • Benzene is a planar resonance hybrid with six delocalised π electrons and equal C–C bonds of 139 pm.
  • Aromatic = planar + fully delocalised + (4n + 2) π electrons (Hückel's rule).
  • Benzene mainly undergoes electrophilic substitution (nitration, halogenation, sulphonation, Friedel-Crafts) in three steps: electrophile, arenium ion, loss of H⁺.
  • –OH, –NH₂, –CH₃ activate and direct o/p; halogens deactivate but direct o/p; –NO₂, –CHO, –COOH, –CN, –SO₃H deactivate and direct meta.
  • Benzene and fused polynuclear hydrocarbons are toxic and carcinogenic.
Read the full lesson

Privacy · Terms · Refunds · Delivery