- Foundation
- About 24 min
- 5 practice questions
Aromatic hydrocarbons: benzene, aromaticity, electrophilic substitution and directive influence
Explain the structure and stability of benzene, apply Hückel's rule, prepare benzene, write its electrophilic substitution and addition reactions with the mechanism, predict the directing effect of substituents, and state why some aromatic hydrocarbons are harmful.
If something looks wrong, please tell us.
By the end of this lesson you can
- Name disubstituted benzenes using ortho, meta and para.
- Explain the structure of benzene using Kekulé structures, resonance and orbital overlap.
- Use the three conditions (including Hückel's 4n + 2 rule) to decide whether a ring is aromatic.
- Write nitration, halogenation, sulphonation and Friedel-Crafts reactions and the three-step mechanism.
- Predict whether a substituent directs a new group to ortho/para or meta positions, and plan a simple synthesis.
Aromatic hydrocarbons, or arenes, were named for the pleasant smell of many early examples. Most contain a benzene ring (benzenoid compounds), but some aromatic rings contain no benzene ring (non-benzenoid). Benzene, toluene, naphthalene and biphenyl are common arenes. Although benzene looks highly unsaturated, in most of its reactions the ring survives unchanged.
Naming and isomerism
All six hydrogen atoms of benzene are equivalent, so there is only one monosubstituted product of each kind, for example methylbenzene (toluene). When two hydrogen atoms are replaced, three position isomers are possible: ortho (o-), positions 1,2; meta (m-), positions 1,3; and para (p-), positions 1,4. The three dimethylbenzenes are o-, m- and p-xylene (1,2-, 1,3- and 1,4-dimethylbenzene).
The structure of benzene
Benzene, C₆H₆, was isolated by Michael Faraday in 1825. It forms a triozonide, suggesting three double bonds, yet it gives only one monosubstituted product, so all six C–H units must be equivalent. In 1865 August Kekulé proposed a six-membered ring of carbon atoms with alternate single and double bonds. His structure predicted two different 1,2-dibromobenzenes (bromines across a double bond or across a single bond), but only one is known; Kekulé suggested that the double bonds keep shifting position. Even so, his structure could not explain benzene's unusual stability or its preference for substitution over addition.
Today benzene is described as a resonance hybrid of the two Kekulé structures, drawn as a hexagon with a circle inside. In orbital terms, each carbon is sp² hybridised and forms three σ bonds (two C–C, one C–H) in a flat hexagon. Each carbon keeps one p orbital perpendicular to the ring. These six p orbitals overlap equally with both neighbours, so the six π electrons are delocalised in two rings of electron cloud, one above and one below the plane. X-ray studies show the molecule is planar and all six C–C bonds are equal, 139 pm, between C–C (154 pm) and C=C (133 pm). Delocalised electrons are held more strongly by the nuclei, which makes benzene much more stable than a hypothetical cyclohexatriene, and the absence of true double bonds explains its reluctance to add reagents.
Aromaticity and Hückel's rule
Any ring, with or without a benzene ring, is aromatic if it is (i) planar, (ii) has complete delocalisation of π electrons around the ring, and (iii) contains (4n + 2) π electrons, where n = 0, 1, 2, ... (Hückel's rule). So aromatic rings have 2, 6, 10, 14 ... π electrons.
Worked example 1: aromatic or not?
Benzene: planar, fully delocalised, 6 π electrons = 4(1) + 2: aromatic. Cyclopentadienyl anion, C₅H₅⁻: planar ring; two C=C bonds give 4 π electrons and the lone pair on the negative carbon gives 2 more, all delocalised: 6 = 4(1) + 2, aromatic. Cyclopentadiene, C₅H₆: one ring carbon is sp³ (CH₂), which breaks the circle of p orbitals: not aromatic. Cycloocta-1,3,5,7-tetraene: 8 π electrons, which is not 4n + 2, and the ring is not planar: not aromatic. Cyclopropenyl cation, C₃H₃⁺: 2 π electrons = 4(0) + 2, planar and delocalised: aromatic.
Preparation and physical properties of benzene
- Cyclic polymerisation of ethyne: 3C₂H₂ → C₆H₆ (red-hot iron tube, 873 K).
- Decarboxylation of sodium benzoate: C₆H₅COONa + NaOH → C₆H₆ + Na₂CO₃ (heat with soda lime).
- Reduction of phenol: phenol vapour over heated zinc dust: C₆H₅OH + Zn → C₆H₆ + ZnO.
- Commercially, benzene is isolated from coal tar. Arenes are non-polar, colourless liquids or solids with a characteristic smell, immiscible with water but miscible with organic solvents, and they burn with a sooty flame. Naphthalene balls are used as a moth repellent.
Electrophilic substitution reactions
| Reaction | Reagent | Electrophile | Product from benzene |
|---|---|---|---|
| Nitration | Conc. HNO₃ + conc. H₂SO₄ (nitrating mixture), heat | NO₂⁺ (nitronium ion) | Nitrobenzene, C₆H₅NO₂ |
| Halogenation | Cl₂ with anhydrous FeCl₃ or AlCl₃ (or Br₂/FeBr₃) | Cl⁺ | Chlorobenzene, C₆H₅Cl |
| Sulphonation | Fuming H₂SO₄ (oleum), heat | SO₃ | Benzenesulphonic acid, C₆H₅SO₃H |
| Friedel-Crafts alkylation | CH₃Cl + anhydrous AlCl₃ | CH₃⁺ | Toluene, C₆H₅CH₃ |
| Friedel-Crafts acylation | CH₃COCl (or (CH₃CO)₂O) + anhydrous AlCl₃ | CH₃CO⁺ (acylium ion) | Acetophenone, C₆H₅COCH₃ |
With excess reagent, further hydrogen atoms are replaced; excess chlorine with AlCl₃ eventually gives hexachlorobenzene, C₆Cl₆. In Friedel-Crafts alkylation the carbocation may rearrange to a more stable one, which is why 1-chloropropane gives mainly isopropylbenzene.
Mechanism of electrophilic substitution
- Generate the electrophile Lewis acid AlCl₃: Cl₂ + AlCl₃ → Cl⁺ + [AlCl₄]⁻. Nitration: HNO₃ accepts H⁺ from H₂SO₄, then loses H₂O to give NO₂⁺.
- Attack on the ring E⁺ bonds to one carbon, giving a resonance-stabilised carbocation (σ-complex or arenium ion); that carbon becomes sp³ and aromaticity is lost.
- Loss of a proton [AlCl₄]⁻ or HSO₄⁻ removes H⁺ from the sp³ carbon, restoring the aromatic ring.
In making the nitronium ion, sulphuric acid acts as the acid and nitric acid as the base: it is a simple acid-base equilibrium.
Addition and combustion
Under vigorous conditions benzene does add. With H₂ over nickel at high temperature and pressure it gives cyclohexane, C₆H₁₂. In ultraviolet light three molecules of Cl₂ add to give benzene hexachloride (BHC, gammaxane), C₆H₆Cl₆. Benzene burns with a sooty flame: C₆H₆ + 15/2 O₂ → 6CO₂ + 3H₂O. For any hydrocarbon:
CₓHᵧ + (x + y/4) O₂ → x CO₂ + (y/2) H₂O
Directive influence of substituents
When a monosubstituted benzene is substituted again, the three possible products are not formed equally. Which positions are favoured depends on the group already present, not on the incoming one.
- Ortho/para directing and activating: –OH, –NH₂, –NHR, –NHCOCH₃, –OCH₃, –CH₃, –C₂H₅. In phenol, resonance pushes the lone-pair electrons of oxygen into the ring, raising electron density mainly at the ortho and para positions. The –I effect of oxygen lowers it slightly, but resonance wins, so the ring is activated.
- Ortho/para directing but deactivating: halogens. Their strong –I effect lowers the electron density of the whole ring, making substitution harder, but resonance still leaves ortho and para richer than meta.
- Meta directing and deactivating: –NO₂, –CN, –CHO, –COR, –COOH, –COOR, –SO₃H. In nitrobenzene the –I and resonance effects withdraw electrons, most of all from ortho and para positions, so meta is the least electron-poor position and is attacked.
How substituents direct a new group
-
Ortho/para, activating
- –OH, –NH₂, –OCH₃, –CH₃
- Push electron density into the ring
- React faster than benzene
-
Ortho/para, deactivating
- –Cl, –Br, –I
- Strong –I effect; resonance favours o/p
- React slower than benzene
-
Meta, deactivating
- –NO₂, –CN, –CHO, –COOH, –SO₃H
- Withdraw electron density, most from o/p
- React slower than benzene
Worked example 2: planning the order of steps
(a) Benzene to m-bromonitrobenzene. Nitrate first (HNO₃/H₂SO₄) to get nitrobenzene; –NO₂ is meta directing, so brominating next (Br₂/FeBr₃) puts Br at the meta position. Brominating first would give o- and p-products instead. (b) Benzene to 4-bromotoluene. First Friedel-Crafts methylation (CH₃Cl/AlCl₃) gives toluene; –CH₃ is ortho/para directing, so bromination (Br₂/FeBr₃) gives 2- and 4-bromotoluene, from which the para isomer is separated.
Worked example 3: a combustion calculation
What mass of CO₂ forms when 3.9 g of benzene burns completely? (C = 12, H = 1, O = 16 g mol⁻¹.) Molar mass of C₆H₆ = 78 g mol⁻¹, so moles = 3.9 ÷ 78 = 0.050 mol. Each mole gives 6 mol CO₂, so CO₂ = 0.30 mol; mass = 0.30 × 44 = 13.2 g. Oxygen used = 0.050 × 15/2 = 0.375 mol.
Carcinogenicity and toxicity
Benzene and polynuclear hydrocarbons with more than two fused benzene rings are toxic and carcinogenic (cancer causing); benzo[a]pyrene is a well-known example. Such compounds form during incomplete combustion of tobacco, coal and petroleum. Inside the body they undergo biochemical changes that can damage DNA.
Key takeaways
- Benzene is a planar resonance hybrid with six delocalised π electrons and equal C–C bonds of 139 pm.
- Aromatic = planar + fully delocalised + (4n + 2) π electrons (Hückel's rule).
- Benzene mainly undergoes electrophilic substitution (nitration, halogenation, sulphonation, Friedel-Crafts) in three steps: electrophile, arenium ion, loss of H⁺.
- –OH, –NH₂, –CH₃ activate and direct o/p; halogens deactivate but direct o/p; –NO₂, –CHO, –COOH, –CN, –SO₃H deactivate and direct meta.
- Benzene and fused polynuclear hydrocarbons are toxic and carcinogenic.
Check your understanding
-
1. Which species is aromatic?
- Cyclopentadiene, C₅H₆
- Cyclopentadienyl anion, C₅H₅⁻
- Cyclooctatetraene, C₈H₈
- Cyclohexene, C₆H₁₀
Show answer
Answer: B. C₅H₅⁻ is planar, fully delocalised and has 6 π electrons (4n + 2 with n = 1). Cyclopentadiene has an sp³ CH₂ that breaks delocalisation, cyclooctatetraene has 8 π electrons and is not planar, and cyclohexene has only one double bond.
-
2. What is the electrophile in the nitration of benzene?
- NO₂⁻
- NO₃⁻
- HSO₄⁻
- NO₂⁺
Show answer
Answer: D. Nitric acid accepts a proton from sulphuric acid and then loses water, producing the nitronium ion NO₂⁺, the electrophile that attacks the ring.
-
3. Which group is ortho/para directing but deactivating?
- –OH
- –NO₂
- –Cl
- –CH₃
Show answer
Answer: C. Halogens withdraw electrons by the –I effect, lowering the reactivity of the ring, but their lone pairs supply electrons by resonance to the ortho and para positions. –OH and –CH₃ are activating; –NO₂ is meta directing.
-
4. All six C–C bonds in benzene are 139 pm long. What does this show?
- Benzene has three isolated double bonds
- The π electrons are delocalised over the whole ring
- Benzene is not planar
- Benzene contains only single bonds
Show answer
Answer: B. Isolated single and double bonds would give two different lengths (154 and 133 pm). One length in between means each bond is the same, which fits six π electrons spread evenly around the ring.
-
5. Assertion (A): To make m-bromonitrobenzene from benzene, nitration should be carried out before bromination.
Reason (R): The nitro group is a meta-directing group.- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: A. Once –NO₂ is on the ring, it sends the incoming Br to the meta position. Brominating first would give mainly o- and p-bromonitrobenzene, because Br directs ortho/para. R explains A.
Sign in to keep track of the lessons you finish.