- Foundation
- About 22 min
- 5 practice questions
Alkanes: properties, halogenation mechanism, combustion and conformations
Explain trends in the boiling points of alkanes, follow the free radical mechanism of halogenation, write and calculate combustion reactions, describe other reactions of alkanes, and compare the staggered and eclipsed conformations of ethane.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain how chain length and branching affect the boiling points of alkanes.
- Write the initiation, propagation and termination steps of the chlorination of methane.
- Balance combustion equations and do simple combustion calculations.
- Describe controlled oxidation, isomerisation, aromatisation, reaction with steam and pyrolysis.
- Draw and compare the staggered and eclipsed conformations of ethane.
Alkanes are generally unreactive, yet they are the fuels that run our homes and vehicles, and under the right conditions they can be converted into many useful substances. This lesson explains their physical properties and their main reactions.
Physical properties
C–C and C–H bonds are almost non-polar, so alkane molecules attract each other only by weak van der Waals forces. At 298 K, C₁–C₄ are gases, C₅–C₁₇ liquids and C₁₈ upwards solids. They are colourless and odourless, insoluble in water but soluble in non-polar solvents ('like dissolves like'); this is why petrol removes greasy stains, since grease is itself a mixture of higher alkanes.
Boiling points rise steadily with molecular mass, because larger molecules have larger surface area and stronger van der Waals forces. Among isomers, branching lowers the boiling point: a branched molecule is more compact, almost spherical, so it has less surface contact with its neighbours.
| Isomer of C₅H₁₂ | Shape | Boiling point / K |
|---|---|---|
| Pentane | Straight chain | 309.1 |
| 2-Methylbutane | One branch | 301 |
| 2,2-Dimethylpropane | Nearly spherical | 282.5 |
Halogenation: a free radical substitution
Alkanes undergo substitution: an H atom is replaced by another atom or group. With chlorine in diffused sunlight or ultraviolet light (or at high temperature), methane gives a mixture: CH₃Cl, CH₂Cl₂, CHCl₃ and CCl₄, with HCl at each step. The reactivity of halogens is F₂ > Cl₂ > Br₂ > I₂; fluorination is violent, and iodination is slow and reversible, needing an oxidising agent such as HIO₃ or HNO₃ to remove the HI formed. Hydrogen atoms are replaced in the order 3° > 2° > 1°.
Free radical chlorination of methane
- Initiation Light breaks the weakest bond, Cl–Cl, by homolysis: Cl₂ → 2Cl•.
- Propagation (a) Cl• + CH₄ → •CH₃ + HCl.
- Propagation (b) •CH₃ + Cl₂ → CH₃Cl + Cl•; the new Cl• repeats step (a), forming a chain.
- Termination Radicals pair up: Cl• + Cl• → Cl₂; •CH₃ + •CH₃ → C₂H₆; •CH₃ + Cl• → CH₃Cl.
The termination step •CH₃ + •CH₃ → CH₃–CH₃ explains why a little ethane is found among the products of chlorinating methane. Further propagation steps such as Cl• + CH₃Cl → •CH₂Cl + HCl explain the more highly chlorinated products.
Combustion
Alkanes burn in excess air to carbon dioxide and water with the release of a great deal of heat, which is why they are used as fuels. CH₄ (g) + 2O₂ (g) → CO₂ (g) + 2H₂O (l); ΔcH⁻ = −890 kJ mol⁻¹. For any alkane:
CₙH₂ₙ₊₂ + (3n + 1)/2 O₂ → n CO₂ + (n + 1) H₂O
With too little oxygen, combustion is incomplete and carbon black (soot) forms, CH₄ + O₂ → C + 2H₂O; carbon black is used in inks and black pigments.
Worked example 1: combustion calculations
(a) Balance the combustion of butane. n = 4: O₂ needed = (3 × 4 + 1)/2 = 13/2. So C₄H₁₀ + 13/2 O₂ → 4CO₂ + 5H₂O, or doubling, 2C₄H₁₀ + 13O₂ → 8CO₂ + 10H₂O. Check O: 26 on the left; 16 + 10 = 26 on the right. (b) Volume of oxygen to burn 10 L of propane (same temperature and pressure): C₃H₈ + 5O₂ → 3CO₂ + 4H₂O, so 10 L propane needs 5 × 10 = 50 L of O₂ and gives 30 L of CO₂. (c) Heat from burning 8.0 g of methane: moles = 8.0 ÷ 16 = 0.50 mol; heat released = 0.50 × 890 = 445 kJ.
Other reactions of alkanes
- Controlled oxidation with a regulated supply of O₂ and catalysts: 2CH₄ + O₂ → 2CH₃OH (Cu, 523 K, 100 atm); CH₄ + O₂ → HCHO + H₂O (Mo₂O₃); 2CH₃CH₃ + 3O₂ → 2CH₃COOH + 2H₂O (manganese acetate). Alkanes with a tertiary H are oxidised by KMnO₄ to alcohols: (CH₃)₃CH → (CH₃)₃COH.
- Isomerisation: n-alkanes heated with anhydrous AlCl₃ and HCl give branched isomers; hexane gives 2-methylpentane and 3-methylpentane.
- Aromatisation (reforming): n-alkanes with six or more carbons, heated to 773 K at 10-20 atm over oxides of V, Mo or Cr on alumina, form benzene and its homologues; hexane gives benzene and heptane gives toluene.
- Reaction with steam: CH₄ + H₂O → CO + 3H₂ (Ni, 1273 K), an industrial source of hydrogen.
- Pyrolysis (cracking): heating breaks higher alkanes into smaller alkanes and alkenes by a free radical path; dodecane at 973 K over Pt, Pd or Ni gives heptane, pentene and other products.
Conformations of ethane
The electron cloud of a C–C σ bond is symmetrical about the bond axis, so one CH₃ group can rotate relative to the other. The different arrangements produced by such rotation are conformations (conformers or rotamers). Two extremes matter: in the eclipsed conformation the H atoms on the front carbon lie directly in front of those on the back carbon; in the staggered conformation they lie as far apart as possible, at 60° in a Newman projection. Any arrangement in between is called skew. Bond lengths and angles are the same in all of them.
They are drawn in two ways. In a Sawhorse projection the C–C bond is drawn as a slanting line, front carbon at the lower end. In a Newman projection you look straight along the C–C bond: the front carbon is a point with three bonds at 120°, and the back carbon is a circle with three shorter bonds. In the eclipsed form the C–H bond clouds repel more; this repulsion is torsional strain. So the staggered form has the lowest energy and is the most stable, and the eclipsed form the highest. The difference is only about 12.5 kJ mol⁻¹, which molecules easily gain from collisions at room temperature, so rotation is almost free and the conformers cannot be separated.
Conformations of ethane
-
Staggered
- H atoms on the two carbons as far apart as possible
- Dihedral angle 60° in Newman projection
- Least torsional strain
- Most stable
-
Eclipsed
- H atoms directly behind one another
- Dihedral angle 0°
- Maximum torsional strain
- Least stable, about 12.5 kJ mol⁻¹ higher
Worked example 2: chlorination products
Ethane is chlorinated in light. Why might butane appear as a by-product? Propagation forms ethyl radicals: Cl• + CH₃CH₃ → CH₃CH₂• + HCl. In termination two ethyl radicals can combine: CH₃CH₂• + •CH₂CH₃ → CH₃CH₂CH₂CH₃, which is butane. The same reasoning explains ethane from methane.
Key takeaways
- Boiling points rise with chain length and fall with branching.
- Halogenation is a free radical chain reaction: initiation, propagation, termination.
- Combustion: CₙH₂ₙ₊₂ + (3n + 1)/2 O₂ → nCO₂ + (n + 1)H₂O, releasing much heat.
- Controlled oxidation, isomerisation, aromatisation, steam reforming and cracking turn alkanes into useful products.
- Staggered ethane is more stable than eclipsed by about 12.5 kJ mol⁻¹, a small barrier, so rotation is almost free.
Check your understanding
-
1. Which of these has the lowest boiling point?
- Pentane
- Hexane
- 2,2-Dimethylpropane
- 2-Methylbutane
Show answer
Answer: C. Among the C₅H₁₂ isomers, the most branched (2,2-dimethylpropane, nearly spherical) has the least surface contact and weakest van der Waals forces. Hexane is larger still and boils higher than all the C₅ isomers.
-
2. Which step of methane chlorination accounts for the small amount of ethane formed?
- Initiation: Cl₂ → 2Cl•
- Termination: •CH₃ + •CH₃ → C₂H₆
- Propagation: Cl• + CH₄ → •CH₃ + HCl
- Propagation: •CH₃ + Cl₂ → CH₃Cl + Cl•
Show answer
Answer: B. Ethane can only form when two methyl radicals meet and join. That uses up radicals and ends a chain, so it is a termination step.
-
3. How many moles of O₂ are needed for the complete combustion of 1 mol of pentane, C₅H₁₂?
- 8
- 5
- 6.5
- 11
Show answer
Answer: A. Using (3n + 1)/2 with n = 5: (15 + 1)/2 = 8. Check: C₅H₁₂ + 8O₂ → 5CO₂ + 6H₂O; O on the right = 10 + 6 = 16 = 2 × 8.
-
4. Methane burns with ΔcH = −890 kJ mol⁻¹. How much heat is released by burning 4.0 g of methane (molar mass 16 g mol⁻¹)?
- 890 kJ
- 445 kJ
- 3560 kJ
- 222.5 kJ
Show answer
Answer: D. Moles of CH₄ = 4.0 ÷ 16 = 0.25 mol. Heat released = 0.25 × 890 = 222.5 kJ.
-
5. Assertion (A): The staggered conformation of ethane is more stable than the eclipsed conformation.
Reason (R): In the staggered conformation the C–H bond electron clouds of the two carbons are farthest apart, so torsional strain is least.- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: A. Both statements are true, and the reduced repulsion (torsional strain) between the bond clouds is exactly why the staggered form has lower energy. R explains A.
Sign in to keep track of the lessons you finish.