- Foundation
- About 24 min
- 5 practice questions
More reactions of alkenes, and alkynes: structure, acidity and additions
Predict products of alkenes with sulphuric acid, water, permanganate and ozone, use ozonolysis to locate a double bond, describe polymerisation, and explain the structure, preparation, acidity and addition reactions of alkynes.
If something looks wrong, please tell us.
By the end of this lesson you can
- Write the products of adding H₂SO₄ and water to alkenes, and of oxidising alkenes with KMnO₄.
- Work out ozonolysis products, and work backwards from them to the alkene.
- Describe the polymerisation of ethene and propene.
- Explain the structure of the C≡C bond and how ethyne is made.
- Explain why terminal alkynes are acidic and write addition and polymerisation reactions of alkynes.
This lesson finishes the reactions of alkenes and then turns to alkynes. Alkynes have a triple bond and two π bonds, so they add twice as much reagent, and their terminal hydrogen atoms show a surprising acidic character.
More addition reactions of alkenes
- Cold concentrated H₂SO₄ adds by Markovnikov's rule to give an alkyl hydrogen sulphate: CH₃CH=CH₂ + H₂SO₄ → CH₃CH(OSO₃H)CH₃.
- Water, with a few drops of concentrated H₂SO₄ as catalyst, adds by Markovnikov's rule to give an alcohol: CH₃CH=CH₂ + H₂O → CH₃CH(OH)CH₃ (propan-2-ol).
Oxidation
Cold, dilute, alkaline KMnO₄ (Baeyer's reagent) adds two –OH groups across the double bond to give a vicinal glycol: CH₂=CH₂ + H₂O + [O] → HOCH₂–CH₂OH (ethane-1,2-diol). The purple colour disappears, which is another test for unsaturation. Acidic KMnO₄ or acidic K₂Cr₂O₇ breaks the double bond and gives ketones and/or carboxylic acids, depending on the alkene: but-2-ene gives two molecules of ethanoic acid.
Ozonolysis: finding where the double bond is
Ozone adds across the double bond to form an ozonide, which is then split by zinc and water. The C=C is cut and each doubly bonded carbon becomes a C=O. A =CH₂ end becomes methanal (HCHO); a =CHR end becomes an aldehyde RCHO; a =CR₂ end becomes a ketone R₂CO. Because the products show exactly where the chain was cut, ozonolysis is used to locate double bonds.
Ozonolysis rule: cut the C=C and put =O on each carbon. Reverse it to find an alkene: join the two carbonyl carbons with a double bond and remove the oxygens.
Worked example 1: ozonolysis forwards and backwards
(a) Hex-3-ene, CH₃CH₂CH=CHCH₂CH₃: cutting between C-3 and C-4 gives two identical pieces, CH₃CH₂CHO, so 2 mol propanal. (b) 2-Methylpropene, (CH₃)₂C=CH₂: gives propanone, (CH₃)₂C=O, and methanal, HCHO. (c) Backwards: an alkene gives propanone and ethanal. Write the carbonyl compounds as (CH₃)₂C=O and O=CHCH₃; remove the oxygens and join the carbons: (CH₃)₂C=CHCH₃, which is 2-methylbut-2-ene.
Polymerisation
At high temperature and pressure with a catalyst, a very large number of ethene molecules (the monomer) join to give polythene, –(CH₂–CH₂)ₙ–, a polymer. Propene gives polypropene, –(CH(CH₃)–CH₂)ₙ–. Polythene is used for bags, sheets, squeeze bottles, toys and pipes; polypropene for milk crates, buckets and moulded articles. Their heavy use and slow breakdown in the environment are a serious concern.
Alkynes: naming and structure
Alkynes have at least one C≡C bond and the general formula CₙH₂ₙ₋₂. The first member, ethyne (acetylene), burns in oxygen in the oxy-acetylene flame used for welding. IUPAC names replace '-ane' with '-yne'. Ethyne and propyne have one structure each; C₄H₆ has two: but-1-yne and but-2-yne (position isomers). C₅H₈ has three alkyne structures: pent-1-yne, pent-2-yne and 3-methylbut-1-yne.
In ethyne each carbon is sp hybridised. One sp orbital of each carbon forms the C–C σ bond; the other forms a C–H σ bond, so H–C–C angles are 180° and the molecule is linear. Each carbon keeps two unhybridised p orbitals, perpendicular to each other, which overlap sideways to give two π bonds. Ethyne thus has 3 σ and 2 π bonds. The C≡C bond (823 kJ mol⁻¹, 120 pm) is stronger and shorter than C=C and C–C, and its electron cloud is cylindrically symmetrical about the axis.
| Bond | Hybridisation of C | Bond length / pm | Bond enthalpy / kJ mol⁻¹ |
|---|---|---|---|
| C–C (ethane) | sp³ | 154 | 348 |
| C=C (ethene) | sp² | 134 | 681 |
| C≡C (ethyne) | sp | 120 | 823 |
Preparation of ethyne
From calcium carbide (industrial): limestone is heated to quicklime, CaCO₃ → CaO + CO₂; quicklime is heated with coke, CaO + 3C → CaC₂ + CO; and calcium carbide reacts with water, CaC₂ + 2H₂O → Ca(OH)₂ + C₂H₂. From vicinal dihalides: alcoholic KOH removes one HX to give an alkenyl (vinylic) halide, and sodamide (NaNH₂) removes the second HX to give the alkyne: BrCH₂–CH₂Br → CH₂=CHBr → CH≡CH.
Acidic character of terminal alkynes
Ethyne reacts with sodium, or with sodamide, releasing its hydrogen: HC≡CH + Na → HC≡C⁻Na⁺ + ½H₂ (monosodium ethynide), and CH₃C≡CH + NaNH₂ → CH₃C≡C⁻Na⁺ + NH₃. Ethene and ethane do not do this. The reason is hybridisation: an sp orbital has 50% s character, against 33% for sp² and 25% for sp³. More s character holds electrons closer to the nucleus, so an sp carbon is more electronegative and pulls the C–H bonding pair towards itself, letting the H leave as H⁺ more easily. Only hydrogen on a triply bonded carbon is acidic, so but-2-yne (no such H) gives no reaction.
Acidity: HC≡CH > CH₂=CH₂ > CH₃–CH₃ (s character 50% > 33% > 25%); and HC≡CH > CH₃–C≡CH >> CH₃–C≡C–CH₃.
Addition reactions of alkynes
- H₂ (Pt, Pd or Ni): two molecules add, via the alkene, to the alkane: CH₃C≡CH + 2H₂ → CH₃CH₂CH₃.
- Halogens: two molecules add; Br₂ in CCl₄ is decolourised: HC≡CH + 2Br₂ → CHBr₂–CHBr₂ (1,1,2,2-tetrabromoethane).
- Hydrogen halides: two molecules add by Markovnikov's rule to give a gem dihalide (both halogens on one carbon): HC≡CH + HBr → CH₂=CHBr; then CH₂=CHBr + HBr → CH₃CHBr₂ (1,1-dibromoethane).
- Water: with HgSO₄ and dilute H₂SO₄ at 333 K, one molecule of water adds; the enol formed changes into a carbonyl compound. Ethyne gives ethanal, CH₃CHO; propyne gives propanone, CH₃COCH₃.
Polymerisation. Under suitable conditions ethyne forms polyacetylene, –(CH=CH–CH=CH)ₙ–, which can conduct electricity and is used in thin films as battery electrodes. Passed through a red-hot iron tube at 873 K, three ethyne molecules join into a ring, 3C₂H₂ → C₆H₆ (benzene), a route from aliphatic to aromatic compounds.
From limestone to benzene
- Limestone, CaCO₃ Heat strongly: CaCO₃ → CaO + CO₂.
- Quicklime, CaO Heat with coke: CaO + 3C → CaC₂ + CO.
- Calcium carbide, CaC₂ Add water: CaC₂ + 2H₂O → Ca(OH)₂ + C₂H₂.
- Ethyne, C₂H₂ Pass through a red-hot iron tube at 873 K.
- Benzene, C₆H₆ 3C₂H₂ → C₆H₆: an aliphatic starting material becomes aromatic.
Worked example 2: telling hydrocarbons apart
Three gas jars contain ethane, ethene and ethyne. Test 1: bubble each through Br₂ in CCl₄. Ethane leaves the colour; ethene and ethyne decolourise it (unsaturated). Test 2: pass the two unsaturated gases into a solution of sodamide (or over sodium). Only ethyne reacts, because only it has acidic hydrogen on a triply bonded carbon. So: no reaction with Br₂ = ethane; reacts with Br₂ but not NaNH₂ = ethene; reacts with both = ethyne.
Key takeaways
- H₂SO₄ and water add to alkenes by Markovnikov's rule; Baeyer's reagent gives glycols and is a test for unsaturation.
- Ozonolysis turns each =C into C=O and is used to locate double bonds.
- Alkynes (CₙH₂ₙ₋₂) have sp carbons, a linear shape and one σ + two π bonds in C≡C.
- Ethyne is made from CaC₂ and water, or from vicinal dihalides with alcoholic KOH then NaNH₂.
- Terminal alkynes are weakly acidic because sp carbon is more electronegative; alkynes add two molecules of H₂, X₂ or HX, and water with HgSO₄/H₂SO₄ gives carbonyl compounds.
Check your understanding
-
1. Which alkene gives only propanone on ozonolysis?
- 2-Methylpropene
- 2,3-Dimethylbut-2-ene
- But-2-ene
- 2-Methylbut-2-ene
Show answer
Answer: B. (CH₃)₂C=C(CH₃)₂ is symmetrical; cutting the C=C gives two (CH₃)₂C=O, both propanone. 2-Methylpropene gives propanone + methanal; but-2-ene gives ethanal; 2-methylbut-2-ene gives propanone + ethanal.
-
2. What is formed when propyne is warmed with water in the presence of HgSO₄ and dilute H₂SO₄?
- Propanal
- Propan-1-ol
- Propanone
- Propanoic acid
Show answer
Answer: C. Water adds by Markovnikov's rule, putting –OH on the middle carbon to give the enol CH₃C(OH)=CH₂, which rearranges to the ketone CH₃COCH₃, propanone.
-
3. Why is ethyne more acidic than ethene?
- Ethyne has more hydrogen atoms
- The sp carbon in ethyne has 50% s character and is more electronegative, so it holds the C–H electron pair more strongly
- Ethyne is a larger molecule
- Ethene has a triple bond
Show answer
Answer: B. More s character pulls electrons closer to the carbon nucleus. The sp carbon (50% s) draws the C–H bonding pair towards itself more than sp² carbon (33% s), so the H is released as H⁺ more easily.
-
4. How many σ and π bonds are present in but-2-yne, CH₃–C≡C–CH₃?
- 8 σ and 2 π
- 7 σ and 3 π
- 10 σ and 1 π
- 9 σ and 2 π
Show answer
Answer: D. C–H: 6 σ. C–C single bonds: 2 σ. C≡C: 1 σ + 2 π. Total σ = 6 + 2 + 1 = 9; π = 2.
-
5. Assertion (A): But-2-yne does not react with sodamide to release ammonia.
Reason (R): But-2-yne has no hydrogen atom attached to a triply bonded carbon.- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: A. Only hydrogen on an sp (triply bonded) carbon is acidic enough to react with NaNH₂. In CH₃C≡CCH₃ both triply bonded carbons carry CH₃ groups, so there is no such hydrogen. R explains A.
Sign in to keep track of the lessons you finish.