- Foundation
- About 17 min
- 5 practice questions
Endogenic and exogenic processes: diastrophism, volcanism and denudation
Explain the energy behind endogenic processes, classify diastrophism into orogeny, epeirogeny, earthquakes and plate tectonics, and explain how exogenic processes work through stress, denudation, climate and rock structure.
If something looks wrong, please tell us.
By the end of this lesson you can
- State the sources of energy for endogenic processes and classify diastrophism.
- Distinguish orogeny from epeirogeny and explain PVT changes and metamorphism.
- Explain denudation, its driving forces, and why its effects differ with climate and rock structure.
Lesson 1 named the two groups of geomorphic processes. This lesson looks inside each group: what powers it, what it includes, and why its effects differ from place to place.
Endogenic processes
The energy emanating from within the earth drives endogenic processes. It is mostly generated by radioactivity, rotational and tidal friction, and primordial heat left from the origin of the earth. Through geothermal gradients and heat flow from within, this energy causes diastrophism and volcanism in the lithosphere. Because geothermal gradients, heat flow, crustal thickness and strength vary, endogenic forces act unevenly, so the original, tectonically controlled crustal surface is uneven.
Diastrophism
All processes that move, elevate or build up portions of the earth's crust come under diastrophism.
Diastrophism
- Orogenic processes Mountain building through severe folding, affecting long, narrow belts of the crust.
- Epeirogenic processes Uplift or warping of large parts of the crust: continent building.
- Earthquakes Local, relatively minor movements.
- Plate tectonics Horizontal movements of crustal plates.
In orogeny the crust is severely deformed into folds; in epeirogeny there may be only simple deformation. Orogeny is a mountain-building process, while epeirogeny is a continent-building process. Through orogeny, epeirogeny, earthquakes and plate tectonics, the crust may be faulted and fractured. All these processes cause changes in pressure, volume and temperature (PVT), which in turn induce metamorphism of rocks.
Orogeny versus epeirogeny
-
Orogeny
- Mountain building
- Severe folding
- Long and narrow belts of crust
-
Epeirogeny
- Continent building
- Uplift or warping, simple deformation
- Large parts of the crust
Volcanism includes the movement of molten rock (magma) onto or towards the surface and the formation of many intrusive and extrusive volcanic forms, which you studied in chapter 3.
Exogenic processes
Exogenic processes take their energy from the atmosphere, determined ultimately by energy from the sun, and also from gradients created by tectonic factors (endogenic movements create the slopes down which material moves).
Gravity acts on all earth materials on a slope and tends to move them downslope. Force applied per unit area is called stress. Stress is produced in a solid by pushing or pulling, and it causes deformation. Forces acting along the faces of materials are shear stresses (separating forces); these break rocks and result in angular displacement or slippage. Besides gravitational stress, materials suffer molecular stresses, caused most commonly by temperature changes, crystallisation and melting. Chemical processes loosen bonds between grains and dissolve soluble minerals or cementing materials. So the basic reason behind weathering, mass movements and erosion is the development of stresses in earth materials.
Stress is force per unit area. The development of stresses in earth materials is the basic reason for weathering, mass movement and erosion.
Denudation
All exogenic processes are covered by the general term denudation; to denude means to strip off or uncover. Weathering, mass wasting or movements, erosion and transportation are included in denudation. Each has its own driving force:
| Denudational process | Driving force or energy |
|---|---|
| Weathering | Gravitational and molecular stresses and/or chemical actions |
| Mass movements | Gravitational force |
| Erosion and transportation | Kinetic energy |
Why exogenic processes vary
Temperature and precipitation are the two important climatic elements that control the processes. Climatic regions differ because of latitudinal, seasonal, and land-and-water differences in heating, so exogenic processes vary from region to region. Vegetation, which depends on temperature and precipitation, also has an indirect influence. Within one climatic region there are local differences due to altitude, aspect (the direction a slope faces) and the insolation received by north- and south-facing slopes compared with east- and west-facing ones, as well as differences in wind, precipitation type and intensity, evaporation, daily temperature range, freezing and thawing frequency, and depth of frost.
If climate is the same, the intensity of exogenic processes depends on the type and structure of rocks. Structure includes folds, faults, orientation and inclination of beds, joints, bedding planes, hardness of minerals, their chemical susceptibility, and permeability. A rock may resist one process but not another, and may behave differently under different climates. So processes act at different rates, producing differences in topography. Their effects are small and slow, often imperceptible in a short time, but over the long run they damage rocks severely through continued fatigue.
Worked example 1: calculating stress
A block of rock (illustrative values) presses with a force of 6,000 newtons on a base of 2 square metres. What is the stress? Working: stress = force ÷ area = 6,000 ÷ 2 = 3,000 newtons per square metre. If the same force acted on 0.5 square metres, stress = 6,000 ÷ 0.5 = 12,000 N per square metre. Answer: 3,000 N/m², rising to 12,000 N/m² on the smaller area; the same force is more likely to break rock when concentrated.
Worked example 2: why two slopes weather differently
Two made-up slopes of the same rock on one hill face north and south and weather at different rates. Explain. Reasoning: within a climatic region, aspect changes the insolation a slope receives; one slope gets more sun, so its temperature range, moisture and freezing-thawing differ, and the geomorphic processes operate at different rates. Answer: aspect causes local variation in climatic elements, so the same rock weathers differently.
Key takeaways: endogenic processes are powered by radioactivity, rotational and tidal friction and primordial heat. Diastrophism includes orogeny (mountain building by severe folding), epeirogeny (continent building by uplift or warping), earthquakes and plate tectonics; their PVT changes cause metamorphism. Exogenic processes take energy from the sun and tectonic gradients and work through stresses. Denudation covers weathering (stresses and chemical action), mass movements (gravity) and erosion and transportation (kinetic energy). Climate, aspect, rock type and structure make the processes act at different rates.
Check your understanding
-
1. Uplift or warping of large parts of the earth's crust, which builds continents, is called:
- orogeny
- epeirogeny
- volcanism
- denudation
Show answer
Answer: B. Epeirogenic processes involve uplift or warping of large parts of the crust and are continent building; orogeny is mountain building by severe folding.
-
2. Force applied per unit area is called:
- gradient
- denudation
- stress
- energy
Show answer
Answer: C. The chapter defines stress as force applied per unit area; it is produced in a solid by pushing or pulling.
-
3. According to the chapter's flow chart, erosion and transportation are driven by:
- kinetic energy
- gravitational force alone
- molecular stresses
- chemical actions
Show answer
Answer: A. Weathering is driven by stresses and chemical actions, mass movements by gravity, and erosion and transportation by kinetic energy.
-
4. Which of these is NOT listed as a source of energy for endogenic processes?
- Radioactivity
- Rotational and tidal friction
- Primordial heat
- Sunlight
Show answer
Answer: D. Endogenic energy comes from radioactivity, rotational and tidal friction and primordial heat; sunlight powers exogenic processes.
-
5. Assertion (A): Diastrophism can lead to metamorphism of rocks.
Reason (R): Diastrophic processes cause changes in pressure, volume and temperature in rocks.- Both A and R are true, and R is the correct explanation of A.
- A is true but R is false.
- A is false but R is true.
- Both A and R are false.
Show answer
Answer: A. Orogeny, epeirogeny, earthquakes and plate tectonics cause PVT changes, which induce metamorphism. R explains A.
Sign in to keep track of the lessons you finish.