- Foundation
- About 15 min
- 5 practice questions
Why the earth's surface is uneven: endogenic and exogenic forces
Explain how opposing endogenic and exogenic forces keep the earth's surface uneven, define degradation, aggradation and gradation, and distinguish geomorphic processes from geomorphic agents and the role of gravity.
If something looks wrong, please tell us.
By the end of this lesson you can
- Distinguish endogenic (land-building) from exogenic (land-wearing) forces.
- Define degradation, aggradation, gradation, geomorphic process and geomorphic agent.
- Explain why gravity and gradients are essential to all movement of surface material.
You have studied how the earth formed, how its layers developed, how plates move, and how earthquakes and volcanoes act. Now we turn to the surface on which we live, and begin with a simple question: why is the earth's surface uneven?
Two opposing groups of forces
The earth's crust is dynamic: it has moved and still moves vertically and horizontally, and it moved a little faster in the past than now. Differences in the internal forces that built up the crust caused variations in its outer surface. At the same time, the surface is continuously acted on by external forces, powered basically by energy from sunlight and originating within the atmosphere. The internal forces are still active, though with different intensities.
The external forces are exogenic forces and the internal ones are endogenic forces. Exogenic forces cause wearing down (degradation) of relief and elevations and filling up (aggradation) of basins and depressions. The wearing down of relief variations through erosion is called gradation. Endogenic forces continuously elevate or build up parts of the surface, so the exogenic processes never manage to even out the relief. Variations remain as long as the two opposing groups keep acting. In general, endogenic forces are mainly land-building and exogenic forces mainly land-wearing.
Endogenic versus exogenic forces
-
Endogenic forces
- Originate inside the earth
- Mainly land-building
- Raise and build up parts of the surface
- Processes: diastrophism and volcanism
-
Exogenic forces
- Originate in the atmosphere; energy from the sun
- Mainly land-wearing
- Wear down relief (degradation) and fill depressions (aggradation)
- Processes: weathering, mass wasting, erosion, deposition
Endogenic forces build land up; exogenic forces wear it down and fill hollows. Because the two keep opposing each other, the earth's surface stays uneven.
Why this matters to people
The surface of the earth is sensitive. People depend on it for their sustenance and use it extensively and intensively. Most of it was shaped over very long periods, yet human use and misuse are reducing its potential quickly. If we understand the processes that shape the surface and the materials it is made of, we can take precautions to reduce the harm from human use and preserve it for the future.
Geomorphic processes and agents
The endogenic and exogenic forces that cause physical stresses and chemical actions on earth materials and change the configuration of the surface are called geomorphic processes. Diastrophism and volcanism are endogenic geomorphic processes. Weathering, mass wasting, erosion and deposition are exogenic geomorphic processes and are the main subject of this chapter.
Any exogenic element of nature, such as water, ice or wind, that can acquire and transport earth materials is a geomorphic agent. These elements become mobile because of gradients, remove material, carry it over slopes and deposit it at a lower level. A process is a force applied on earth materials; an agent is a mobile medium, such as running water, moving ice, wind, waves and currents, that removes, transports and deposits materials. Running water, groundwater, glaciers, wind, waves and currents are geomorphic agents. Unless stated separately, exogenic processes and agents are often treated as one and the same.
| Term | Meaning | Example |
|---|---|---|
| Geomorphic process | A force applied on earth materials that changes the surface | Weathering, erosion, diastrophism |
| Geomorphic agent | A mobile medium that removes, transports and deposits material | Running water, glacier, wind, waves |
| Degradation | Wearing down of relief | A hill slowly lowered by erosion |
| Aggradation | Filling up of basins and depressions | A lake basin filled with sediment |
| Gradation | Wearing down of relief variations through erosion | Uplands lowered towards a common level |
Gravity and gradients
Gravity is a directional force that activates all downslope movement of matter and also causes stresses in earth materials. Indirectly, gravitational stresses drive wave- and tide-induced currents and winds. Without gravity and gradients there would be no mobility, and so no erosion, transportation or deposition. Gravity keeps us on the surface and switches on the movement of all surface material. All movements, within the earth or on its surface, occur along gradients: from higher to lower levels, from high to low pressure.
How an exogenic agent works
- Gradient A slope or difference in level or pressure exists.
- Mobility Gravity sets water, ice or air moving down the gradient.
- Removal and transport The moving agent picks up and carries material.
- Deposition Material is laid down at a lower level.
Worked example 1: endogenic or exogenic?
Classify each: (i) a range of mountains rising through folding; (ii) a river cutting a valley; (iii) lava building a plateau; (iv) wind piling up sand. Reasoning: forces from inside the earth are endogenic; agents driven by solar energy and gravity on the surface are exogenic. Answers: (i) endogenic (diastrophism); (ii) exogenic (erosion); (iii) endogenic (volcanism); (iv) exogenic (deposition by wind).
Worked example 2: why the surface never becomes flat
Suppose (made-up figures) erosion lowers a mountain range by 1 m every 10,000 years while uplift raises it by 1.5 m in the same period. What happens to its height over 100,000 years? Working: number of 10,000-year periods = 10. Net change per period = 1.5 − 1 = 0.5 m up. Over 10 periods = 10 × 0.5 = 5 m higher. Answer: the range rises by about 5 m. Only if uplift stopped would erosion slowly win. This is why relief variations remain as long as both forces act.
Key takeaways: the surface is uneven because endogenic forces (from inside the earth, land-building) and exogenic forces (from the atmosphere, powered by the sun, land-wearing) oppose each other. Exogenic forces cause degradation and aggradation; gradation is the wearing down of relief through erosion. Geomorphic processes are forces acting on earth materials; agents such as running water, glaciers, wind and waves remove, transport and deposit material. Gravity and gradients make all such movement possible.
Check your understanding
-
1. Which one of the following is a gradational process?
- Diastrophism
- Volcanism
- Erosion
- Uplift
Show answer
Answer: C. Gradation is the wearing down of relief variations through erosion. Diastrophism and volcanism are endogenic, land-building processes.
-
2. Exogenic forces derive their energy basically from:
- the sun
- radioactivity inside the earth
- the rotation of the earth only
- the earth's core
Show answer
Answer: A. The chapter says external forces are induced basically by energy from sunlight, acting through the atmosphere, along with gradients.
-
3. A mobile medium such as running water or a glacier that removes, transports and deposits earth materials is called a:
- geomorphic process
- geomorphic agent
- gradient
- relief
Show answer
Answer: B. A process is a force applied on earth materials; an agent is a mobile medium that removes, transports and deposits them.
-
4. The filling up of basins and depressions by exogenic processes is called:
- degradation
- diastrophism
- gradation
- aggradation
Show answer
Answer: D. Exogenic forces wear down relief (degradation) and fill up basins and depressions (aggradation).
-
5. Assertion (A): Exogenic processes fail to even out the relief of the earth's surface.
Reason (R): Endogenic forces continuously elevate or build up parts of the earth's surface.- A is true but R is false.
- A is false but R is true.
- Both A and R are true, and R is the correct explanation of A.
- Both A and R are false.
Show answer
Answer: C. As fast as exogenic forces wear the surface down, endogenic forces build parts of it up, so relief variations remain. R explains A.
Sign in to keep track of the lessons you finish.