Revision notes

Chapter 5 Geomorphic Processes: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Why the earth's surface is uneven: endogenic and exogenic forces

Endogenic versus exogenic forces

  • Endogenic forces
    • Originate inside the earth
    • Mainly land-building
    • Raise and build up parts of the surface
    • Processes: diastrophism and volcanism
  • Exogenic forces
    • Originate in the atmosphere; energy from the sun
    • Mainly land-wearing
    • Wear down relief (degradation) and fill depressions (aggradation)
    • Processes: weathering, mass wasting, erosion, deposition

Endogenic forces build land up; exogenic forces wear it down and fill hollows. Because the two keep opposing each other, the earth's surface stays uneven.

Key terms
TermMeaningExample
Geomorphic processA force applied on earth materials that changes the surfaceWeathering, erosion, diastrophism
Geomorphic agentA mobile medium that removes, transports and deposits materialRunning water, glacier, wind, waves
DegradationWearing down of reliefA hill slowly lowered by erosion
AggradationFilling up of basins and depressionsA lake basin filled with sediment
GradationWearing down of relief variations through erosionUplands lowered towards a common level

How an exogenic agent works

  1. Gradient A slope or difference in level or pressure exists.
  2. Mobility Gravity sets water, ice or air moving down the gradient.
  3. Removal and transport The moving agent picks up and carries material.
  4. Deposition Material is laid down at a lower level.

Key takeaways: the surface is uneven because endogenic forces (from inside the earth, land-building) and exogenic forces (from the atmosphere, powered by the sun, land-wearing) oppose each other. Exogenic forces cause degradation and aggradation; gradation is the wearing down of relief through erosion. Geomorphic processes are forces acting on earth materials; agents such as running water, glaciers, wind and waves remove, transport and deposit material. Gravity and gradients make all such movement possible.

Read the full lesson

Lesson 2

Endogenic and exogenic processes: diastrophism, volcanism and denudation

Diastrophism

  • Orogenic processes Mountain building through severe folding, affecting long, narrow belts of the crust.
  • Epeirogenic processes Uplift or warping of large parts of the crust: continent building.
  • Earthquakes Local, relatively minor movements.
  • Plate tectonics Horizontal movements of crustal plates.

Orogeny versus epeirogeny

  • Orogeny
    • Mountain building
    • Severe folding
    • Long and narrow belts of crust
  • Epeirogeny
    • Continent building
    • Uplift or warping, simple deformation
    • Large parts of the crust

Stress is force per unit area. The development of stresses in earth materials is the basic reason for weathering, mass movement and erosion.

Denudational processes and their driving forces (based on the chapter's flow chart)
Denudational processDriving force or energy
WeatheringGravitational and molecular stresses and/or chemical actions
Mass movementsGravitational force
Erosion and transportationKinetic energy

Key takeaways: endogenic processes are powered by radioactivity, rotational and tidal friction and primordial heat. Diastrophism includes orogeny (mountain building by severe folding), epeirogeny (continent building by uplift or warping), earthquakes and plate tectonics; their PVT changes cause metamorphism. Exogenic processes take energy from the sun and tectonic gradients and work through stresses. Denudation covers weathering (stresses and chemical action), mass movements (gravity) and erosion and transportation (kinetic energy). Climate, aspect, rock type and structure make the processes act at different rates.

Read the full lesson

Lesson 3

Weathering: chemical, physical and biological

Weathering is the mechanical disintegration and chemical decomposition of rocks, in place, by the elements of weather and climate.

Weathering processes

  • Chemical Decompose or dissolve rock by chemical reactions
    • Solution
    • Carbonation
    • Hydration
    • Oxidation
    • Reduction
  • Physical or mechanical Break rock by applied forces
    • Gravitational: overburden pressure, load, shearing stress
    • Expansion: temperature change, crystal growth, animal activity
    • Water pressure: wetting and drying cycles
  • Biological Organisms add or remove minerals and break rock
    • Burrowing and wedging by earthworms, termites, rodents
    • Human ploughing and disturbance
    • Acids from decaying matter
    • Pressure of plant roots

Enrichment of an ore by weathering

  1. Weathering Rock containing a valuable mineral is weathered.
  2. Leaching Groundwater removes other materials chemically or physically.
  3. Concentration rises The share of the valuable material left behind increases.
  4. Economically viable ore The deposit becomes worth mining and refining.

Key takeaways: weathering is the in-situ mechanical disintegration and chemical decomposition of rocks; climate controls its processes and the depth of the weathering mantle. Chemical weathering (solution, carbonation, hydration, oxidation, reduction) needs water, air and heat; physical weathering is caused mostly by thermal expansion and pressure release; biological weathering comes from burrowing, roots, decaying matter and human activity. Exfoliation is a result: domes from unloading, tors from thermal expansion. Weathering prepares soils, supports biodiversity, aids erosion and enriches ores.

Read the full lesson

Lesson 4

Mass movements, landslides, erosion and deposition

Types of landslides

  • Slump One or several units of debris slip with a backward rotation relative to the slope.
  • Debris slide Rapid rolling or sliding of earth debris without backward rotation.
  • Debris fall Nearly free fall of debris from a vertical or overhanging face.
  • Rockslide Sliding of rock masses down bedding, joint or fault surfaces; fast and destructive on steep slopes; affects material to a substantial depth.
  • Rock fall Free fall of rock blocks from the superficial layers of any steep slope, keeping away from the slope.

Why landslides happen in two Indian hill regions

  • Himalayas: very frequent
    • Tectonically active
    • Mostly sedimentary rocks and unconsolidated or semi-consolidated deposits
    • Very steep slopes
  • Western Ghats and Nilgiris: less frequent
    • Relatively stable, very hard rocks
    • Steep slopes with almost vertical cliffs and escarpments
    • Strong mechanical weathering from temperature changes
    • Heavy rain over short periods; frequent rock falls

Agents of erosion

  • Controlled by climate
    • Wind: gaseous state
    • Running water: liquid state
    • Glaciers: solid state
  • Not controlled by climate
    • Waves: work decided by location at the land-sea interface (coasts)
    • Groundwater: work decided by the rocks; karst forms where rocks are permeable and soluble and water is available

Mass movement is driven by gravity alone, with no agent; erosion needs an agent that picks up and carries debris; deposition happens when the agent loses energy, coarse material first.

Key takeaways: mass movements carry debris downslope by gravity alone, so they are not erosion; they are favoured by weak materials, steep slopes, heavy rain and lack of vegetation and set off by causes such as undercutting, overloading, earthquakes and deforestation. Landslides are rapid, perceptible movements of dry material: slump, debris slide, debris fall, rockslide and rock fall. Landslides are frequent in the tectonically active Himalayas and also occur in the steep, rain-soaked Western Ghats and Nilgiris. Erosion is acquisition and transport of debris by agents; wind, running water and glaciers are climate-controlled, waves and groundwater are not. Deposition follows loss of energy, coarse material first.

Read the full lesson

Lesson 5

Soil formation and the soil-forming factors

Stages of soil formation

  1. Weathered material Weathered rock or transported deposits form the mantle.
  2. Pioneer colonisers Bacteria and simple plants such as mosses and lichens settle; small organisms shelter in it.
  3. Humus builds up Dead remains of organisms and plants accumulate as humus.
  4. Grasses, ferns, then bushes and trees Seeds arrive with birds and wind; roots penetrate.
  5. Porous, sponge-like mass Roots and burrowing animals make it hold water and let air pass.
  6. Mature soil A complex mixture of mineral and organic products.

Soil-forming factors

  • Parent material (passive)
    • Residual soils from in-situ weathered debris
    • Transported soils from deposits
    • Texture, structure, mineral and chemical make-up matter
  • Topography (passive)
    • Exposure to sunlight
    • Surface and sub-surface drainage
    • Thin soils on steep slopes, thick on flat uplands
  • Climate (active)
    • Moisture: precipitation, evaporation, humidity
    • Temperature: seasonal and daily variation
  • Biological activity
    • Humus from dead plants
    • Bacteria and nitrogen fixation
    • Mixing by ants, termites, earthworms, rodents
  • Time (passive)
    • Decides maturity and profile development
    • Young soils show no or poor horizons
Effects of climate on soils
Climate conditionSoil processResult
Excess waterEluviation and illuviationComponents move down and are deposited lower in the soil
Wet equatorial, high rainfallRemoval of bases and silicaDesilication
Dry, evaporation exceeds precipitationCapillary rise and evaporationSalt crust: hardpan
Tropical or intermediate precipitationPrecipitation of calcium carbonateKanker nodules
High temperatureFast chemical activityDeeper soil profiles
FreezingChemical activity stopsMostly mechanically broken material (tundra)

Soil-forming factors: parent material, topography and time are passive; climate is active; biological activity adds humus and nitrogen. Pedogenesis begins with weathering but needs living things to make a mature soil.

Key takeaways: soil is a dynamic medium, a result of decay and a medium for growth. Pedogenesis starts with the weathering mantle, which bacteria, mosses and lichens colonise; humus builds up, plants and animals make the mass porous, and a mature soil forms. The five factors are parent material, topography and time (passive), climate (active: eluviation, illuviation, desilication, hardpans, kanker; temperature sets profile depth) and biological activity (humus, peat in cold climates, little humus in the humid tropics, nitrogen fixation by Rhizobium).

Read the full lesson

Privacy · Terms · Refunds · Delivery