• Foundation
  • About 18 min
  • 5 practice questions

Physical quantities, units and the SI system

Tell base quantities from derived ones, name the seven SI base units with their symbols, use the radian and steradian, and convert units with prefixes step by step.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain what a unit is and why a measurement is always 'number × unit'.
  • Distinguish base (fundamental) quantities and units from derived ones.
  • Name the seven SI base quantities, their units and symbols.
  • Define the radian and the steradian and use them in calculations.
  • Convert between units and prefixes without losing track of powers of ten.

Physics is a quantitative science: a statement such as 'the rod is long' tells us very little, while 'the rod is 1.25 m long' can be checked, compared and used in a calculation. To measure any physical quantity we compare it with a fixed, internationally agreed reference called a unit. The result of every measurement is therefore a number together with a unit, for example 1.25 m, 4.0 s or 72 kg. Drop the unit and the number becomes meaningless.

Base quantities, derived quantities and systems of units

There are a very large number of physical quantities, but they are related to one another by definitions and laws. Speed is distance divided by time; force is mass times acceleration. So we need to choose units for only a few quantities, called base (fundamental) quantities, and build the units of all others from them. Units of base quantities are base units; units built from them are derived units. A complete set of base and derived units is called a system of units.

Before the present system, three systems were widely used. The CGS system took the centimetre, gram and second as base units of length, mass and time; the FPS (British) system used the foot, pound and second; the MKS system used the metre, kilogram and second. The internationally accepted system today is the Système International d'Unités (SI). It uses a decimal scheme, so converting within it is just a matter of shifting powers of ten.

Physical quantities and their units

  • Base quantities (7)
    • Length, mass, time
    • Electric current, thermodynamic temperature
    • Amount of substance, luminous intensity
    • Units chosen by agreement: m, kg, s, A, K, mol, cd
  • Derived quantities
    • Built from base quantities by definitions
    • Speed (m s⁻¹), force (newton), energy (joule)
    • Units are products and quotients of base units
  • Dimensionless angles
    • Plane angle: radian (rad)
    • Solid angle: steradian (sr)
    • Ratios of lengths or areas, so they have no dimensions

The seven SI base units

SI base quantities and units
Base quantitySI unitSymbol
Lengthmetrem
Masskilogramkg
Timeseconds
Electric currentampereA
Thermodynamic temperaturekelvinK
Amount of substancemolemol
Luminous intensitycandelacd

Since the 2018 revision, each base unit is defined by fixing the exact numerical value of a constant of nature: for example the metre through the speed of light in vacuum, the second through a particular radiation frequency of the caesium-133 atom, and the kilogram through the Planck constant. You do not need to memorise these defining values; they show how precisely units are now tied to nature rather than to a metal bar or block kept in a vault. When you use the mole, always state the entities counted (atoms, molecules, ions, electrons and so on).

Two dimensionless units: the radian and the steradian

A plane angle dθ is defined as the length of an arc ds divided by the radius r of the circle: dθ = ds/r. Its unit is the radian (rad). A whole circle has circumference 2πr, so a full turn is 2πr/r = 2π rad, which means 180° = π rad. A solid angle dΩ is the area dA cut out on a sphere divided by the square of the radius: dΩ = dA/r². Its unit is the steradian (sr); a whole sphere subtends 4πr²/r² = 4π sr at its centre. Both are ratios of like quantities, so both are dimensionless.

Measurement = numerical value × unit. Plane angle θ = arc/radius (rad); solid angle Ω = area/radius² (sr); π rad = 180°.

Derived units and prefixes

Some derived units have special names. Force: newton, 1 N = 1 kg m s⁻². Work and energy: joule, 1 J = 1 N m = 1 kg m² s⁻². Power: watt, 1 W = 1 J s⁻¹. Pressure: pascal, 1 Pa = 1 N m⁻². Very large and very small values are written with prefixes for powers of ten.

Common SI prefixes
PrefixSymbolFactor
gigaG10⁹
megaM10⁶
kilok10³
centic10⁻²
millim10⁻³
microμ10⁻⁶
nanon10⁻⁹
picop10⁻¹²

A few units outside SI are still allowed for everyday use, such as the minute, hour and day for time, the litre (1 L = 10⁻³ m³) for volume, the tonne (1 t = 10³ kg) for mass and the degree for angles. For astronomical distances physicists also use the astronomical unit (about 1.496 × 10¹¹ m, the mean Earth-Sun distance) and the light year (the distance light travels in vacuum in one year, about 9.46 × 10¹⁵ m).

Worked example 1: converting a speed

Convert 54 km h⁻¹ into m s⁻¹. Step 1: write each unit in SI: 1 km = 1000 m and 1 h = 3600 s. Step 2: substitute: 54 km h⁻¹ = 54 × 1000 m / 3600 s. Step 3: simplify: 54000/3600 = 15. Answer: 54 km h⁻¹ = 15 m s⁻¹. A useful shortcut follows: to change km h⁻¹ to m s⁻¹ multiply by 5/18.

Worked example 2: an angle in radians

A wire bent into an arc of a circle of radius 2.0 m has an arc length of 0.50 m. Find the angle it subtends at the centre in radians and in degrees. Step 1: θ = arc/radius = 0.50 m / 2.0 m = 0.25 rad (the metres cancel, so the radian is dimensionless). Step 2: convert using 180° = π rad: θ = 0.25 × 180°/π ≈ 0.25 × 57.3° ≈ 14°. Answer: 0.25 rad, about 14°.

Worked example 3: newton to dyne

The CGS unit of force is the dyne (1 dyn = 1 g cm s⁻²). How many dynes make one newton? 1 N = 1 kg m s⁻² = (1000 g)(100 cm) s⁻² = 1000 × 100 g cm s⁻² = 10⁵ g cm s⁻². Answer: 1 N = 10⁵ dyn. Treating units like algebraic symbols, and replacing each by its value in the new unit, is the safest way to convert.

Key takeaways

  • A unit is an agreed reference standard; a measurement is a number times a unit.
  • SI has seven base units (m, kg, s, A, K, mol, cd); all other units are derived from them.
  • The radian and the steradian are ratios and therefore dimensionless.
  • Convert by replacing each unit with its equivalent and simplifying the powers of ten.

Check your understanding

  1. 1. Which of the following is NOT an SI base unit?

    1. kelvin
    2. mole
    3. newton
    4. candela
    Show answer

    Answer: C. The seven SI base units are metre, kilogram, second, ampere, kelvin, mole and candela. The newton (1 N = 1 kg m s⁻²) is a derived unit built from the kilogram, metre and second.

  2. 2. A car moves at 72 km h⁻¹. Its speed in m s⁻¹ is:

    1. 20 m s⁻¹
    2. 7.2 m s⁻¹
    3. 259 m s⁻¹
    4. 36 m s⁻¹
    Show answer

    Answer: A. 72 km h⁻¹ = 72 × 1000 m / 3600 s = 72000/3600 = 20 m s⁻¹. Equivalently 72 × 5/18 = 20 m s⁻¹.

  3. 3. What solid angle does a complete sphere subtend at its centre?

    1. 2π sr
    2. π sr
    3. 4π² sr
    4. 4π sr
    Show answer

    Answer: D. Solid angle = area/radius². For a whole sphere the area is 4πr², so Ω = 4πr²/r² = 4π sr.

  4. 4. An arc of length 0.30 m lies on a circle of radius 1.5 m. The angle it subtends at the centre is:

    1. 0.45 rad
    2. 0.20 rad
    3. 5.0 rad
    4. 2.0 rad
    Show answer

    Answer: B. θ = arc/radius = 0.30 m / 1.5 m = 0.20 rad. The metres cancel, which is why the radian is dimensionless.

  5. 5. Assertion (A): The radian is a dimensionless unit. Reason (R): A plane angle is defined as the ratio of an arc length to a radius, both of which are lengths.

    1. Both A and R are true, and R is the correct explanation of A.
    2. Both A and R are true, but R is not the correct explanation of A.
    3. A is true, but R is false.
    4. A is false, but R is true.
    Show answer

    Answer: A. Both statements are true. Because θ = ds/r is length divided by length, the dimensions cancel, and this is exactly why the radian has no dimensions. So R correctly explains A.

Privacy · Terms · Refunds · Delivery