- Foundation
- About 18 min
- 5 practice questions
Significant figures, scientific notation and order of magnitude
Count the significant figures in any reported measurement, write values in scientific notation to remove ambiguity, and estimate the order of magnitude of a quantity.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain why a measured value carries only reliable digits plus one uncertain digit.
- Apply the rules for counting significant figures, including the tricky zeros.
- Show that a change of units never changes the number of significant figures.
- Write a quantity in scientific notation and find its order of magnitude.
Every measurement has some uncertainty, because every instrument has a smallest division it can read (its least count). The way a result is written should tell the reader how precise it is. The convention is simple: report all the digits you know reliably plus the first uncertain digit. Together these are called the significant figures (significant digits). If a stopwatch reading is written as 2.47 s, the digits 2 and 4 are certain and the 7 is the estimated, uncertain digit, so the reading has three significant figures.
Writing more digits than are significant is not 'more accurate'. It is misleading, because it claims a precision that the instrument never had.
Rules for counting significant figures
- All non-zero digits are significant: 4.56 has 3.
- Zeros between two non-zero digits are significant, wherever the decimal point is: 5.007 has 4; 3008 has 4.
- In a number less than 1, zeros to the right of the decimal point but before the first non-zero digit are NOT significant; they only locate the decimal point: 0.00406 has 3.
- The zero conventionally written to the left of the decimal point in a number less than 1 (as in 0.75) is never significant.
- Trailing zeros in a number WITHOUT a decimal point are not significant: 5600 m has 2 (if written this way).
- Trailing zeros in a number WITH a decimal point are significant: 2.500 has 4 and 0.04050 has 4.
- Exact numbers, such as the 2 in 2πr or a counted number of objects, have an unlimited number of significant figures.
Counting significant figures in a reported value
- Ignore the decimal position Leading zeros only place the decimal point, so skip them.
- Start at the first non-zero digit Count it and every digit after it, including zeros in between.
- Check trailing zeros Count them if there is a decimal point; do not count them if there is none.
- Prefer scientific notation In a × 10ᵇ every digit of a is significant, so there is no doubt.
A change of units does not change the significant figures
Precision belongs to the measurement, not to the unit you happen to use. Suppose a length is measured as 3.20 m (three significant figures). In other units it is 320 cm, 3200 mm or 0.00320 km. Looking at '3200 mm' alone, the trailing-zero rule would suggest two significant figures, which is wrong: changing units cannot change the precision. The ambiguity disappears in scientific notation, where every quantity is written as a × 10ᵇ with 1 ≤ a < 10: 3.20 m = 3.20 × 10² cm = 3.20 × 10³ mm = 3.20 × 10⁻³ km. The power of ten does not affect the count, and every digit in a, including trailing zeros, is significant. So each form clearly has three significant figures.
Significant figures = reliable digits + the first uncertain digit. In a × 10ᵇ, every digit of a is significant; the power of ten is not.
Order of magnitude
For a quick estimate, write the quantity as a × 10ᵇ and round a: to 1 if a ≤ 5, and to 10 if 5 < a < 10. The quantity is then roughly 10ᵇ or 10ᵇ⁺¹, and that exponent is its order of magnitude. For example, the speed of light, 3.0 × 10⁸ m s⁻¹, is of the order of 10⁸ m s⁻¹, while the mass of an electron, 9.11 × 10⁻³¹ kg, rounds up to the order of 10⁻³⁰ kg. Comparing orders of magnitude tells you at a glance how many powers of ten separate two quantities.
| Quantity (standard value) | Scientific notation | Order of magnitude |
|---|---|---|
| Speed of light in vacuum | 3.0 × 10⁸ m s⁻¹ | 10⁸ m s⁻¹ |
| Mean radius of the Earth | 6.37 × 10⁶ m | 10⁷ m |
| Mass of the Earth | 5.97 × 10²⁴ kg | 10²⁵ kg |
| Mass of an electron | 9.11 × 10⁻³¹ kg | 10⁻³⁰ kg |
| Charge of an electron (magnitude) | 1.6 × 10⁻¹⁹ C | 10⁻¹⁹ C |
Worked example 1: counting significant figures
State the number of significant figures in (a) 0.03070 kg, (b) 6.0200 × 10⁵ m, (c) 7000 s, (d) 400.0 N. (a) The leading zeros 0.0 are not significant; count from the 3: digits 3, 0, 7, 0. The final zero comes after a decimal point, so it counts. Answer: 4. (b) In scientific notation every digit of 6.0200 counts: 5. (c) No decimal point, so the trailing zeros do not count: 1. (d) A decimal point is present, so every zero counts: 4.
Worked example 2: comparing sizes by order of magnitude
The radius of the Sun is about 6.96 × 10⁸ m and the radius of the Earth is about 6.37 × 10⁶ m. By how many orders of magnitude do they differ? Step 1: 6.96 > 5, so the Sun's radius is of the order of 10⁹ m. Step 2: 6.37 > 5, so the Earth's radius is of the order of 10⁷ m. Step 3: 10⁹/10⁷ = 10². Answer: about two orders of magnitude; the exact ratio 6.96 × 10⁸ / 6.37 × 10⁶ ≈ 109 agrees with this rough estimate.
Key takeaways
- Report reliable digits plus one uncertain digit; extra digits claim false precision.
- Leading zeros never count; trailing zeros count only when there is a decimal point.
- Scientific notation removes every ambiguity, and changing units never changes the count.
- Order of magnitude: round a in a × 10ᵇ to 1 (a ≤ 5) or 10 (a > 5).
Check your understanding
-
1. How many significant figures are there in 0.004060 m?
- 6
- 3
- 4
- 7
Show answer
Answer: C. The zeros before the 4 only locate the decimal point and are not significant. Counting from the 4: digits 4, 0, 6, 0. The zero between 4 and 6 counts, and the trailing zero counts because there is a decimal point. That gives 4 significant figures.
-
2. A length is recorded as 5.40 m. Written in millimetres with the same precision, it should be:
- 5400 mm
- 5.40 × 10³ mm
- 5.4 × 10³ mm
- 540 mm
Show answer
Answer: B. 5.40 m has 3 significant figures. 1 m = 10³ mm, so the length is 5.40 × 10³ mm, which keeps all three digits. Writing 5400 mm would suggest only 2 significant figures, and 5.4 × 10³ mm drops one.
-
3. Which of these values has exactly two significant figures?
- 0.00450 kg
- 3050 g
- 0.4050 kg
- 2.0 × 10⁴ g
Show answer
Answer: D. 2.0 × 10⁴ g: in scientific notation every digit of 2.0 counts, so two significant figures. The others: 0.00450 has 4, 5, 0 (three; the trailing zero counts after a decimal point); 3050 has 3, 0, 5 (three; the zero between non-zero digits counts, the final zero does not); 0.4050 has 4, 0, 5, 0 (four).
-
4. What is the order of magnitude of 7.4 × 10⁻³ m?
- 10⁻² m
- 10⁻³ m
- 10⁻⁴ m
- 10⁷ m
Show answer
Answer: A. In a × 10ᵇ, a = 7.4 is greater than 5, so it rounds to 10. Then 7.4 × 10⁻³ ≈ 10 × 10⁻³ = 10⁻² m. The order of magnitude is −2.
-
5. Assertion (A): 4.700 m and 0.004700 km have the same number of significant figures. Reason (R): Changing the unit of a measurement does not change its precision.
- Both A and R are true, and R is the correct explanation of A.
- Both A and R are true, but R is not the correct explanation of A.
- A is true, but R is false.
- A is false, but R is true.
Show answer
Answer: A. 4.700 m has 4 significant figures (trailing zeros after a decimal point count). 0.004700 km: leading zeros do not count, leaving 4, 7, 0, 0, which is also 4. The reason is true and is exactly why the count is unchanged, so R correctly explains A.
Sign in to keep track of the lessons you finish.