Revision notes

Chapter 1 Units and Measurement: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Physical quantities, units and the SI system

Physical quantities and their units

  • Base quantities (7)
    • Length, mass, time
    • Electric current, thermodynamic temperature
    • Amount of substance, luminous intensity
    • Units chosen by agreement: m, kg, s, A, K, mol, cd
  • Derived quantities
    • Built from base quantities by definitions
    • Speed (m s⁻¹), force (newton), energy (joule)
    • Units are products and quotients of base units
  • Dimensionless angles
    • Plane angle: radian (rad)
    • Solid angle: steradian (sr)
    • Ratios of lengths or areas, so they have no dimensions
SI base quantities and units
Base quantitySI unitSymbol
Lengthmetrem
Masskilogramkg
Timeseconds
Electric currentampereA
Thermodynamic temperaturekelvinK
Amount of substancemolemol
Luminous intensitycandelacd

Measurement = numerical value × unit. Plane angle θ = arc/radius (rad); solid angle Ω = area/radius² (sr); π rad = 180°.

Common SI prefixes
PrefixSymbolFactor
gigaG10⁹
megaM10⁶
kilok10³
centic10⁻²
millim10⁻³
microμ10⁻⁶
nanon10⁻⁹
picop10⁻¹²
  • A unit is an agreed reference standard; a measurement is a number times a unit.
  • SI has seven base units (m, kg, s, A, K, mol, cd); all other units are derived from them.
  • The radian and the steradian are ratios and therefore dimensionless.
  • Convert by replacing each unit with its equivalent and simplifying the powers of ten.
Read the full lesson

Lesson 2

Significant figures, scientific notation and order of magnitude

Counting significant figures in a reported value

  1. Ignore the decimal position Leading zeros only place the decimal point, so skip them.
  2. Start at the first non-zero digit Count it and every digit after it, including zeros in between.
  3. Check trailing zeros Count them if there is a decimal point; do not count them if there is none.
  4. Prefer scientific notation In a × 10ᵇ every digit of a is significant, so there is no doubt.

Significant figures = reliable digits + the first uncertain digit. In a × 10ᵇ, every digit of a is significant; the power of ten is not.

Orders of magnitude of some standard values
Quantity (standard value)Scientific notationOrder of magnitude
Speed of light in vacuum3.0 × 10⁸ m s⁻¹10⁸ m s⁻¹
Mean radius of the Earth6.37 × 10⁶ m10⁷ m
Mass of the Earth5.97 × 10²⁴ kg10²⁵ kg
Mass of an electron9.11 × 10⁻³¹ kg10⁻³⁰ kg
Charge of an electron (magnitude)1.6 × 10⁻¹⁹ C10⁻¹⁹ C
  • Report reliable digits plus one uncertain digit; extra digits claim false precision.
  • Leading zeros never count; trailing zeros count only when there is a decimal point.
  • Scientific notation removes every ambiguity, and changing units never changes the count.
  • Order of magnitude: round a in a × 10ᵇ to 1 (a ≤ 5) or 10 (a > 5).
Read the full lesson

Lesson 3

Calculating with significant figures, rounding off and uncertainty

Which rule applies?

  • Multiply or divide
    • Look at the number of significant figures in each input
    • Result keeps the smallest count
    • Example: 12.4 × 3.6 = 44.64 → 45
  • Add or subtract
    • Look at the number of decimal places in each input
    • Result keeps the fewest decimal places
    • Example: 12.35 + 4.1 + 0.068 = 16.518 → 16.5

× or ÷: fewest significant figures. + or −: fewest decimal places. Dropped digit exactly 5: preceding even digit stays, odd digit goes up.

  • The result of a calculation is never more precise than its least precise input.
  • Products and quotients follow significant figures; sums and differences follow decimal places.
  • Keep one extra digit in intermediate steps and round once at the end.
  • Relative errors add in products and quotients; a power multiplies the relative error.
Read the full lesson

Lesson 4

Dimensions, dimensional formulae and dimensional equations

Finding the dimensional formula of a derived quantity

  1. Write a defining equation For example, pressure = force/area or work = force × displacement.
  2. Replace each quantity by its dimensions Use ones you already know, such as [F] = [M L T⁻²] and [area] = [L²].
  3. Collect powers of M, L and T Add exponents when multiplying, subtract when dividing.
  4. Write the result in [Mᵃ Lᵇ Tᶜ] form Include a zero power where a base quantity is absent if asked.
Dimensional formulae of common mechanical quantities
QuantityDefining relationDimensional formulaSI unit
Velocity, speeddisplacement/time[M⁰ L T⁻¹]m s⁻¹
Accelerationvelocity/time[M⁰ L T⁻²]m s⁻²
Densitymass/volume[M L⁻³ T⁰]kg m⁻³
Forcemass × acceleration[M L T⁻²]N
Momentum, impulsemass × velocity; force × time[M L T⁻¹]kg m s⁻¹ = N s
Work, energy, torqueforce × distance[M L² T⁻²]J (torque: N m)
Powerwork/time[M L² T⁻³]W
Pressure, stressforce/area[M L⁻¹ T⁻²]Pa
Frequency1/time period[M⁰ L⁰ T⁻¹]Hz = s⁻¹
Angle, strain, refractive indexratio of like quantitiesdimensionlessnone (angle: rad)

Dimensions describe the kind of quantity, not its size. In mechanics every quantity can be written as [Mᵃ Lᵇ Tᶜ].

  • Dimensions are the powers of the base quantities that make up a quantity.
  • A dimensional formula is found from a defining equation by substituting dimensions.
  • Work and torque, or momentum and impulse, share dimensions; ratios of like quantities have none.
  • Pure numbers such as ½ or 2π never affect dimensions.
Read the full lesson

Lesson 5

Dimensional analysis: checking equations and deducing relations

A dimensionally wrong equation must be wrong; a dimensionally correct equation need not be right.

Method of dimensions, step by step

  1. List the dependence Assume Q = k aˣ bʸ cᶻ with k a dimensionless constant.
  2. Substitute dimensions Write [Q] and each of [a], [b], [c] in M, L, T form.
  3. Equate powers Powers of M, of L and of T must match on both sides.
  4. Solve for x, y, z Three equations give three unknown powers.
  5. Write the formula Q = k aˣ bʸ cᶻ; the value of k must come from experiment or theory.

What dimensional analysis cannot do

  • Constants
    • Cannot find dimensionless constants such as ½ or 2π
  • Some functions
    • Cannot deduce relations involving sin, cos, log or exponentials
    • Cannot handle a sum of terms, such as ut + ½at², by the product method
  • Look-alike quantities
    • Cannot tell apart quantities with the same dimensions, such as work and torque
  • Too many variables
    • In mechanics, fails if the result depends on more than three quantities
  • Every term of a correct equation has the same dimensions (homogeneity).
  • Failing the test proves an equation wrong; passing it does not prove it right.
  • The method of dimensions gives the form of a relation but never the dimensionless constant.
  • To convert units, use n₂ = n₁ (M₁/M₂)ᵃ (L₁/L₂)ᵇ (T₁/T₂)ᶜ.
Read the full lesson

Privacy · Terms · Refunds · Delivery