- Foundation
- About 20 min
- 5 practice questions
Acceleration and the graphs of motion
Define average and instantaneous acceleration, interpret its sign, read acceleration from v-t graphs and find displacement as the area under a v-t graph.
If something looks wrong, please tell us.
By the end of this lesson you can
- Define average acceleration and instantaneous acceleration (a = dv/dt).
- Interpret positive, negative and zero acceleration with a stated sign convention.
- Recognise x-t graphs for positive, negative and zero acceleration.
- Read v-t graphs: slope gives acceleration, area gives displacement.
- Explain why zero velocity does not mean zero acceleration.
Velocity usually changes during motion. Should the change be measured per metre travelled or per second? Galileo, studying falling bodies and balls rolling down slopes, found that for free fall the change of velocity per unit time is constant, while the change per unit distance is not (it gets smaller as the fall continues). This led to defining acceleration as the rate of change of velocity with time.
Average and instantaneous acceleration
The average acceleration over an interval is the change in velocity divided by the time taken: ā = (v₂ − v₁)/(t₂ − t₁) = Δv/Δt. Its SI unit is m s⁻². On a velocity-time graph it is the slope of the chord joining the two points. The instantaneous acceleration is the limit as Δt → 0: a = dv/dt, the slope of the tangent to the v-t graph at that instant. Since v = dx/dt, acceleration is also the second derivative of position, a = d²x/dt².
Velocity has magnitude and direction, so acceleration can arise from a change in speed, a change in direction or both. In straight-line motion, acceleration can be positive, negative or zero. Its sign alone does not say whether the body is speeding up: what matters is whether acceleration and velocity have the same sign (speeding up) or opposite signs (slowing down). For example, with upward taken as positive, gravity gives a negative acceleration; a falling stone (negative velocity) speeds up, while a stone thrown upward (positive velocity) slows down.
Speeding up or slowing down?
-
v and a have the same sign
- Speed increases
- Example: v = +8 m s⁻¹, a = +2 m s⁻²
- Example: falling stone with upward positive: v < 0, a < 0
-
v and a have opposite signs
- Speed decreases (retardation)
- Example: braking car, v = +20 m s⁻¹, a = −5 m s⁻²
- Example: stone moving up: v > 0, a < 0
-
a = 0
- Velocity constant
- x-t graph a straight line
- v-t graph horizontal
Shapes of the graphs
For zero acceleration the x-t graph is a straight line. For positive acceleration it curves upward (its slope keeps increasing); for negative acceleration it curves downward. For constant acceleration the x-t graph is a parabola, and the v-t graph is a straight line whose slope equals the acceleration. A v-t line may cross the time axis: this means the body stops for an instant and reverses direction, though the acceleration (the slope) stays the same.
Real graphs of position and velocity are smooth. Sharp corners drawn in textbook sketches are simplifications, because velocity and acceleration cannot jump to new values in zero time.
Area under a velocity-time graph
The area under a v-t graph between two instants equals the displacement in that interval. For constant velocity u, the v-t graph is a horizontal line and the area of the rectangle under it is u × T, which is exactly the displacement uT. The units confirm it: the vertical axis is in m s⁻¹ and the horizontal axis in s, so area has the unit m. Areas below the time axis count as negative displacement.
a = dv/dt = slope of the v-t graph. Displacement = area under the v-t graph. Zero velocity at an instant does not mean zero acceleration.
Worked example 1: average acceleration
(a) A scooter speeds up from 5.0 m s⁻¹ to 20 m s⁻¹ in 5.0 s. Its average acceleration is (20 − 5.0)/5.0 = 3.0 m s⁻². (b) A car moving at 20 m s⁻¹ brakes to rest in 4.0 s: ā = (0 − 20)/4.0 = −5.0 m s⁻². The negative sign, with the velocity positive, means the car is slowing down; we say its retardation is 5.0 m s⁻².
Worked example 2: displacement from a v-t graph
A car starts from rest, speeds up uniformly to 12 m s⁻¹ in 4.0 s, runs at 12 m s⁻¹ for 6.0 s, and then slows uniformly to rest in 3.0 s. Find the total displacement. The v-t graph is a trapezium made of three parts. Part 1 (triangle): ½ × 4.0 × 12 = 24 m. Part 2 (rectangle): 12 × 6.0 = 72 m. Part 3 (triangle): ½ × 3.0 × 12 = 18 m. Total: 24 + 72 + 18 = 114 m. The accelerations are the slopes: +3.0 m s⁻², 0 and −4.0 m s⁻².
Worked example 3: acceleration from a formula
A particle's velocity is v = 3t² − 2t (v in m s⁻¹, t in s). Find its acceleration at t = 2.0 s. a = dv/dt = 6t − 2. At t = 2.0 s, a = 12 − 2 = 10 m s⁻². Note that at t = 0 the velocity is zero, yet the acceleration is −2 m s⁻²: a body can be momentarily at rest and still be accelerating.
Key takeaways
- Acceleration is the rate of change of velocity with time: ā = Δv/Δt, a = dv/dt.
- Speeding up: a and v have the same sign; slowing down: opposite signs.
- Slope of a v-t graph is acceleration; area under it is displacement.
- A body at the top of an upward throw has v = 0 but a = g downward.
Check your understanding
-
1. A train's velocity changes from 10 m s⁻¹ to 25 m s⁻¹ in 6.0 s. Its average acceleration is:
- 1.7 m s⁻²
- 4.2 m s⁻²
- 2.5 m s⁻²
- 6.0 m s⁻²
Show answer
Answer: C. ā = (v₂ − v₁)/Δt = (25 − 10)/6.0 = 15/6.0 = 2.5 m s⁻².
-
2. With upward taken as positive, a ball thrown straight up is at its highest point. Which is correct there?
- v = 0 and a = 0
- v = 0 and a = −g
- v ≠ 0 and a = 0
- v = 0 and a = +g
Show answer
Answer: B. At the highest point the ball is momentarily at rest, so v = 0. Gravity still acts downward, so the acceleration is g downward, which is −g with upward positive. Zero velocity does not mean zero acceleration.
-
3. A v-t graph is a straight line from v = 0 at t = 0 to v = 15 m s⁻¹ at t = 6 s. The displacement in these 6 s is:
- 90 m
- 2.5 m
- 15 m
- 45 m
Show answer
Answer: D. Displacement = area of the triangle under the v-t graph = ½ × base × height = ½ × 6 × 15 = 45 m.
-
4. A body has velocity −6 m s⁻¹ and acceleration +2 m s⁻² (along the same line). At that instant the body is:
- slowing down
- speeding up
- moving with constant speed
- at rest
Show answer
Answer: A. Velocity and acceleration have opposite signs, so the speed is decreasing. The body moves in the negative direction while the acceleration points the positive way, opposing the motion.
-
5. Assertion (A): A negative acceleration always means that the speed of a body is decreasing. Reason (R): The sign of acceleration depends on the choice of the positive direction of the axis.
- Both A and R are true, and R is the correct explanation of A.
- Both A and R are true, but R is not the correct explanation of A.
- A is true, but R is false.
- A is false, but R is true.
Show answer
Answer: D. A is false: a falling stone with upward chosen as positive has negative acceleration yet its speed increases. R is true: the sign depends on the axis we choose. Speeding up or slowing down depends on whether v and a have the same or opposite signs.
Sign in to keep track of the lessons you finish.