- Foundation
- About 22 min
- 5 practice questions
Kinematic equations for uniformly accelerated motion
Derive v = v₀ + at, x = v₀t + ½at² and v² = v₀² + 2ax from the v-t graph and by calculus, and solve straight-line problems with careful signs.
If something looks wrong, please tell us.
By the end of this lesson you can
- Derive the three equations of motion from the area under a v-t graph.
- Derive the same equations by integration (calculus method).
- Write the general forms with a starting position x₀.
- Solve problems on uniformly accelerated motion with consistent signs.
- Find the stopping distance of a vehicle and explain why it depends on v₀².
When the acceleration a is constant, five quantities describe a straight-line motion: initial velocity v₀, final velocity v, acceleration a, time t and displacement x. Three simple equations connect them. Given any three of the five, you can find the other two.
Derivation from the v-t graph
Equation 1. For constant acceleration, average acceleration equals a: a = (v − v₀)/(t − 0), so v = v₀ + at. On a v-t graph this is a straight line starting at v₀ with slope a.
Equation 2. Displacement = area under the v-t graph from 0 to t. The area is a rectangle of height v₀ and width t, plus a triangle of base t and height (v − v₀). So x = v₀t + ½(v − v₀)t. Using v − v₀ = at from equation 1: x = v₀t + ½(at)t, so x = v₀t + ½at². The same area can be written as x = ½(v₀ + v)t: for constant acceleration only, the average velocity is the simple mean (v₀ + v)/2.
Equation 3. From equation 1, t = (v − v₀)/a. Put this in x = ½(v + v₀)t: x = ½(v + v₀)(v − v₀)/a = (v² − v₀²)/(2a). So v² = v₀² + 2ax.
Derivation by calculus
Start from the definitions. a = dv/dt, so dv = a dt. Integrate from v₀ (at t = 0) to v (at t), with a constant: v − v₀ = at, giving v = v₀ + at. Next, v = dx/dt, so dx = v dt = (v₀ + at) dt. Integrate from x₀ to x: x − x₀ = v₀t + ½at². Finally write a = dv/dt = (dv/dx)(dx/dt) = v dv/dx, so v dv = a dx. Integrating: ½(v² − v₀²) = a(x − x₀), giving v² = v₀² + 2a(x − x₀). The calculus method has an advantage: the definitions a = dv/dt and v = dx/dt also work when acceleration is not constant.
| Equation | Missing quantity | General form (start at x₀) |
|---|---|---|
| v = v₀ + at | x | v = v₀ + at |
| x = v₀t + ½at² | v | x = x₀ + v₀t + ½at² |
| v² = v₀² + 2ax | t | v² = v₀² + 2a(x − x₀) |
| x = ½(v₀ + v)t | a | x − x₀ = ½(v₀ + v)t |
v = v₀ + at; x − x₀ = v₀t + ½at²; v² = v₀² + 2a(x − x₀). Valid only for constant acceleration; every quantity carries its sign.
Solving a constant-acceleration problem
- Choose origin and positive direction Write them down; draw a sketch.
- List the knowns with signs Note which of v₀, v, a, t, x are given.
- Pick the equation Use the one that leaves out the quantity you neither know nor need.
- Solve and check Check the sign and size of the answer against the sketch.
Worked example 1: a braking car and stopping distance
A car moving at 90 km h⁻¹ brakes uniformly and stops in 50 m. Find the deceleration and the time to stop. Step 1: v₀ = 90 × 5/18 = 25 m s⁻¹, v = 0, x = 50 m. Step 2: v² = v₀² + 2ax gives 0 = 625 + 2a(50), so a = −625/100 = −6.25 m s⁻². Step 3: v = v₀ + at gives 0 = 25 − 6.25t, so t = 4.0 s. In general, setting v = 0 gives the stopping distance d = v₀²/(2|a|). It is proportional to v₀², so with the same braking, doubling the speed makes the stopping distance four times as long. This is why speed limits near schools are kept low.
Worked example 2: a train starting from rest
A train starts from rest with a constant acceleration of 0.50 m s⁻² for 1.0 min. Find its final speed and the distance covered. Step 1: v₀ = 0, a = 0.50 m s⁻², t = 60 s. Step 2: v = 0 + 0.50 × 60 = 30 m s⁻¹. Step 3: x = 0 + ½ × 0.50 × 60² = 0.25 × 3600 = 900 m.
Worked example 3: signs matter
A particle at x₀ = 5.0 m has velocity −2.0 m s⁻¹ and a constant acceleration of +1.0 m s⁻². Where is it, and how fast is it moving, at t = 6.0 s? Position: x = 5.0 + (−2.0)(6.0) + ½(1.0)(6.0)² = 5.0 − 12 + 18 = 11 m. Velocity: v = −2.0 + 1.0 × 6.0 = +4.0 m s⁻¹. The particle first moved left, stopped at t = 2.0 s (at x = 3.0 m) and then moved right. The equations handle the reversal automatically, provided signs are used consistently.
A related result: the displacement during the nth second alone is sₙ = x(n) − x(n − 1) = v₀ + a(n − ½), found by subtracting the second equation at t = n − 1 from that at t = n. For a body starting from rest with a = 2 m s⁻², the distance in the 3rd second is 0 + 2 × 2.5 = 5 m.
Key takeaways
- The three equations follow from the slope and area of a straight-line v-t graph.
- Calculus gives the same equations, and its definitions also work for varying acceleration.
- Choose the equation that leaves out the quantity you do not know.
- Stopping distance = v₀²/(2|a|): it grows with the square of the speed.
Check your understanding
-
1. A scooter starts from rest and accelerates uniformly at 2.0 m s⁻² for 8.0 s. The distance covered is:
- 16 m
- 128 m
- 32 m
- 64 m
Show answer
Answer: D. x = v₀t + ½at² = 0 + ½ × 2.0 × 8.0² = 1.0 × 64 = 64 m.
-
2. A car moving at 20 m s⁻¹ brakes with a uniform retardation of 4.0 m s⁻². The stopping distance is:
- 50 m
- 5.0 m
- 80 m
- 100 m
Show answer
Answer: A. With v = 0: 0 = v₀² + 2ax, so x = v₀²/(2 × 4.0) = 400/8.0 = 50 m.
-
3. For the same braking retardation, if a vehicle's speed is tripled, its stopping distance becomes:
- 3 times
- 6 times
- 9 times
- √3 times
Show answer
Answer: C. Stopping distance d = v₀²/(2|a|) is proportional to v₀². Tripling v₀ multiplies d by 3² = 9.
-
4. A body starts from rest with uniform acceleration. The distances covered in the 1st second and the 2nd second are in the ratio:
- 1 : 2
- 1 : 3
- 1 : 4
- 1 : 1
Show answer
Answer: B. sₙ = v₀ + a(n − ½). With v₀ = 0: s₁ = a/2 and s₂ = 3a/2. So s₁ : s₂ = 1 : 3.
-
5. Assertion (A): The equation x = v₀t + ½at² cannot be used if the acceleration of a body changes with time. Reason (R): The kinematic equations are derived assuming the acceleration is constant in magnitude and direction.
- Both A and R are true, and R is the correct explanation of A.
- Both A and R are true, but R is not the correct explanation of A.
- A is true, but R is false.
- A is false, but R is true.
Show answer
Answer: A. Both are true. The equations come from integrating a = dv/dt with a constant (or from a straight-line v-t graph). If a varies, they do not hold; one must go back to a = dv/dt and v = dx/dt. So R explains A.
Sign in to keep track of the lessons you finish.