• Foundation
  • About 18 min
  • 5 practice questions

Describing motion: position, displacement, average velocity and average speed

Treat a moving body as a point object, fix an origin and a positive direction, and distinguish path length from displacement and average speed from average velocity.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain when a moving body can be treated as a point object.
  • Describe position on a straight line using an origin and a sign convention.
  • Distinguish path length (distance) from displacement.
  • Calculate average velocity and average speed, and explain why average speed ≥ |average velocity|.
  • Read a position-time (x-t) graph.

Everything in the universe moves: blood in our arteries, a train between stations, the Earth around the Sun. Motion is the change in position of an object with time. In this chapter we describe motion along a straight line, called rectilinear motion, without asking what causes it. Describing motion is called kinematics; its causes (forces) come in the chapter on laws of motion.

Point objects and frames of reference

We treat a moving body as a point object when its size is much smaller than the distance it moves in the time of interest. A train travelling 300 km between two cities can be treated as a point; the same train entering a 200 m platform cannot. To give a position we need a frame of reference: an origin, a direction chosen as positive and a clock. For a straight line we use an x-axis. Positions to the right of the origin O (the positive direction) are positive and to the left are negative. The choice of origin and positive direction is ours, but it must be stated and kept throughout a problem.

Path length and displacement

Path length (distance travelled) is the total length of the path actually covered. It is a scalar and is never negative. Displacement is the change in position, Δx = x₂ − x₁. It has both size and direction (its sign shows the direction on a line), so it can be positive, negative or zero. If a cyclist goes from x = 0 to x = +500 m and then back to x = +200 m, the path length is 500 + 300 = 800 m, but the displacement is 200 − 0 = +200 m. For a round trip that ends where it began, the displacement is zero even though the path length is not. The magnitude of displacement is always less than or equal to the path length; they are equal only when the body moves in one direction without turning back.

Path length versus displacement

  • Path length (distance)
    • Total length of the path covered
    • Scalar: size only
    • Never negative; never decreases
    • Depends on the actual route
  • Displacement
    • Change in position, x₂ − x₁
    • Has direction (sign on a line)
    • Can be positive, negative or zero
    • Depends only on the start and end points

Average velocity and average speed

Average velocity is displacement divided by the time interval: v̄ = Δx/Δt = (x₂ − x₁)/(t₂ − t₁). Its SI unit is m s⁻¹ and it carries the sign of the displacement. Average speed is the total path length divided by the total time. Because the path length is never smaller than the magnitude of displacement, average speed ≥ |average velocity|, with equality only for motion in one direction.

Average velocity = displacement/time interval. Average speed = path length/time interval. Average speed ≥ |average velocity|.

Reading a position-time graph

A plot of position x against time t shows the whole story of a motion. A horizontal line means the object is at rest. A straight sloping line means uniform motion: equal displacements in equal intervals, at constant velocity. The slope of the line joining two points on an x-t graph, Δx/Δt, is the average velocity over that interval; a steeper slope means a larger velocity, and a downward slope means motion in the negative direction. A curved x-t graph means the velocity is changing.

Worked example 1: a walk with a turn

A boy walks 400 m due east along a straight road in 5.0 min, then turns and walks 100 m west in 1.0 min. Take east as positive. Step 1: total time = 6.0 min = 360 s. Step 2: path length = 400 + 100 = 500 m, so average speed = 500/360 ≈ 1.39 m s⁻¹. Step 3: displacement = +400 − 100 = +300 m, so average velocity = 300/360 ≈ +0.83 m s⁻¹, i.e. 0.83 m s⁻¹ towards the east. As expected, the average speed is larger than the magnitude of the average velocity.

Worked example 2: a round trip

A woman walks 1.2 km from her home to a shop at 4.0 km h⁻¹, and immediately walks back at 6.0 km h⁻¹. Step 1: time out = 1.2/4.0 = 0.30 h; time back = 1.2/6.0 = 0.20 h; total = 0.50 h. Step 2: path length = 2.4 km, so average speed = 2.4/0.50 = 4.8 km h⁻¹. Step 3: she ends where she began, so displacement = 0 and average velocity = 0. Notice that the average speed is not the simple mean of 4.0 and 6.0 (which would be 5.0 km h⁻¹), because she spends longer at the slower speed.

Key takeaways

  • Fix an origin and a positive direction before giving signs to any quantity.
  • Displacement depends only on the start and end; path length depends on the route.
  • Average velocity uses displacement; average speed uses path length.
  • On an x-t graph, the slope of a chord is the average velocity over that interval.

Check your understanding

  1. 1. A runner completes exactly one lap of a 400 m circular track in 80 s. Her average speed and the magnitude of her average velocity are:

    1. 5 m s⁻¹ and 5 m s⁻¹
    2. 0 and 5 m s⁻¹
    3. 5 m s⁻¹ and 0
    4. 0 and 0
    Show answer

    Answer: C. Average speed = path length/time = 400 m/80 s = 5 m s⁻¹. After one full lap she is back at the start, so displacement = 0 and average velocity = 0.

  2. 2. A car moves from x = +40 m to x = −20 m along a straight road. Its displacement is:

    1. −60 m
    2. +60 m
    3. +20 m
    4. −20 m
    Show answer

    Answer: A. Displacement = x₂ − x₁ = (−20) − (+40) = −60 m. The negative sign means the car moved 60 m in the negative direction.

  3. 3. A cyclist covers the first half of a straight 10 km route at 10 km h⁻¹ and the second half at 15 km h⁻¹. Her average speed is:

    1. 12.5 km h⁻¹
    2. 12 km h⁻¹
    3. 25 km h⁻¹
    4. 11 km h⁻¹
    Show answer

    Answer: B. Time for first 5 km = 5/10 = 0.5 h; time for second 5 km = 5/15 ≈ 0.333 h. Total time = 0.8333 h. Average speed = 10/0.8333 = 12 km h⁻¹. (For equal distances it is 2v₁v₂/(v₁ + v₂) = 2 × 10 × 15/25 = 12, not the simple mean 12.5.)

  4. 4. On a position-time graph, a straight line sloping downward to the right shows a body that is:

    1. at rest
    2. speeding up in the positive direction
    3. slowing down
    4. moving with constant velocity in the negative direction
    Show answer

    Answer: D. A straight line has a constant slope, so the velocity is constant. A downward slope means x decreases with time, so the velocity is negative: uniform motion in the negative direction.

  5. 5. Assertion (A): The average speed of a body over an interval can never be less than the magnitude of its average velocity. Reason (R): Path length can never be less than the magnitude of displacement over the same interval.

    1. Both A and R are true, and R is the correct explanation of A.
    2. Both A and R are true, but R is not the correct explanation of A.
    3. A is true, but R is false.
    4. A is false, but R is true.
    Show answer

    Answer: A. Both are true. Since both quantities are divided by the same time interval, the fact that path length ≥ |displacement| directly gives average speed ≥ |average velocity|. So R correctly explains A.

Sign in to keep track of the lessons you finish.

Next lesson → Instantaneous velocity and speed

Privacy · Terms · Refunds · Delivery