Revision notes

Chapter 2 Motion in a Straight Line: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Describing motion: position, displacement, average velocity and average speed

Path length versus displacement

  • Path length (distance)
    • Total length of the path covered
    • Scalar: size only
    • Never negative; never decreases
    • Depends on the actual route
  • Displacement
    • Change in position, x₂ − x₁
    • Has direction (sign on a line)
    • Can be positive, negative or zero
    • Depends only on the start and end points

Average velocity = displacement/time interval. Average speed = path length/time interval. Average speed ≥ |average velocity|.

  • Fix an origin and a positive direction before giving signs to any quantity.
  • Displacement depends only on the start and end; path length depends on the route.
  • Average velocity uses displacement; average speed uses path length.
  • On an x-t graph, the slope of a chord is the average velocity over that interval.
Read the full lesson

Lesson 2

Instantaneous velocity and speed

From average velocity to instantaneous velocity

  1. Pick an interval around t Average velocity Δx/Δt is the slope of a chord on the x-t graph.
  2. Shrink the interval The chord's ends move closer to the point at time t.
  3. Take the limit Δt → 0 The chord becomes the tangent at that point.
  4. Read the velocity v = dx/dt = slope of the tangent at time t.
Average velocity over shrinking intervals centred at t = 2.0 s, for x = 0.5 t³
Δt (s)t₁ (s)t₂ (s)x(t₁) (m)x(t₂) (m)Δx (m)Δx/Δt (m s⁻¹)
2.01.03.00.513.513.06.5
1.01.52.51.68757.81256.1256.125
0.501.752.252.67975.69533.01566.031
0.101.952.053.70744.30760.600136.001
0.0101.9952.0053.970084.030080.06006.000

v = dx/dt: velocity is the slope of the tangent to the x-t graph. Speed = |v| at every instant.

  • Instantaneous velocity is the limit of Δx/Δt as Δt → 0, written dx/dt.
  • Graphically, it is the slope of the tangent to the x-t curve.
  • Where the x-t graph has a horizontal tangent, the body is momentarily at rest.
  • Instantaneous speed always equals the magnitude of instantaneous velocity.
Read the full lesson

Lesson 3

Acceleration and the graphs of motion

Speeding up or slowing down?

  • v and a have the same sign
    • Speed increases
    • Example: v = +8 m s⁻¹, a = +2 m s⁻²
    • Example: falling stone with upward positive: v < 0, a < 0
  • v and a have opposite signs
    • Speed decreases (retardation)
    • Example: braking car, v = +20 m s⁻¹, a = −5 m s⁻²
    • Example: stone moving up: v > 0, a < 0
  • a = 0
    • Velocity constant
    • x-t graph a straight line
    • v-t graph horizontal

a = dv/dt = slope of the v-t graph. Displacement = area under the v-t graph. Zero velocity at an instant does not mean zero acceleration.

  • Acceleration is the rate of change of velocity with time: ā = Δv/Δt, a = dv/dt.
  • Speeding up: a and v have the same sign; slowing down: opposite signs.
  • Slope of a v-t graph is acceleration; area under it is displacement.
  • A body at the top of an upward throw has v = 0 but a = g downward.
Read the full lesson

Lesson 4

Kinematic equations for uniformly accelerated motion

Equations of motion for constant acceleration
EquationMissing quantityGeneral form (start at x₀)
v = v₀ + atxv = v₀ + at
x = v₀t + ½at²vx = x₀ + v₀t + ½at²
v² = v₀² + 2axtv² = v₀² + 2a(x − x₀)
x = ½(v₀ + v)tax − x₀ = ½(v₀ + v)t

v = v₀ + at; x − x₀ = v₀t + ½at²; v² = v₀² + 2a(x − x₀). Valid only for constant acceleration; every quantity carries its sign.

Solving a constant-acceleration problem

  1. Choose origin and positive direction Write them down; draw a sketch.
  2. List the knowns with signs Note which of v₀, v, a, t, x are given.
  3. Pick the equation Use the one that leaves out the quantity you neither know nor need.
  4. Solve and check Check the sign and size of the answer against the sketch.
  • The three equations follow from the slope and area of a straight-line v-t graph.
  • Calculus gives the same equations, and its definitions also work for varying acceleration.
  • Choose the equation that leaves out the quantity you do not know.
  • Stopping distance = v₀²/(2|a|): it grows with the square of the speed.
Read the full lesson

Lesson 5

Free fall, vertical throws, reaction time and relative velocity

Distances fallen from rest in equal intervals τ (s₀ = ½gτ²)
IntervalTotal distance at endDistance in this intervalRatio
1st τ1 s₀1 s₀1
2nd τ4 s₀3 s₀3
3rd τ9 s₀5 s₀5
4th τ16 s₀7 s₀7

Relative velocity of A with respect to B

  • Same direction
    • v_AB = v_A − v_B
    • Relative speed = difference of speeds
    • Overtaking takes a long time
  • Opposite directions
    • v_AB = v_A − (−v_B) = v_A + v_B in magnitude
    • Relative speed = sum of speeds
    • Crossing is quick

Free fall: a = −g (upward positive). From rest, distances in equal intervals go as 1 : 3 : 5 : 7. Reaction time t = √(2d/g). Relative velocity v_AB = v_A − v_B.

  • In free fall the acceleration is g downward at every point, including the top of the path.
  • Use one equation for the whole flight when the acceleration does not change.
  • Successive equal-interval distances from rest follow the odd numbers 1, 3, 5, 7.
  • Relative velocity v_AB = v_A − v_B; speeds subtract for the same direction and add for opposite directions.
Read the full lesson

Privacy · Terms · Refunds · Delivery