Revision notes

Chapter 14 Waves: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

What a wave is: mechanical, transverse and longitudinal waves

Transverse and longitudinal waves

  • Transverse
    • Particles move perpendicular to the wave's travel
    • Crests and troughs
    • Medium must resist shear
    • Travel in solids, not inside fluids
    • Example: wave on a stretched string
  • Longitudinal
    • Particles move along the wave's travel
    • Compressions and rarefactions
    • Medium must resist compression
    • Travel in solids, liquids and gases
    • Example: sound in air
  • A wave is a travelling disturbance: it carries energy and information, not matter.
  • Mechanical waves need a medium; electromagnetic waves do not.
  • Transverse: particle motion perpendicular to travel; only in media that resist shear (solids).
  • Longitudinal: particle motion along the travel; in solids, liquids and gases.
Read the full lesson

Lesson 2

Displacement relation in a progressive wave

Sinusoidal wave moving along +x: y(x, t) = a sin(kx − ωt + φ). Along −x: y(x, t) = a sin(kx + ωt + φ).

Reading y = a sin(kx − ωt + φ)

  • a
    • Amplitude: maximum displacement
  • k
    • Angular wave number
    • λ = 2π/k
  • ω
    • Angular frequency
    • T = 2π/ω, ν = ω/2π
  • Sign between kx and ωt
    • Minus: travels along +x
    • Plus: travels along −x
  • φ
    • Initial phase angle at x = 0, t = 0
  • y = a sin(kx − ωt + φ) moves along +x; a sin(kx + ωt + φ) moves along −x.
  • λ = 2π/k, T = 2π/ω, ν = ω/2π.
  • Every particle of the medium performs SHM of amplitude a and period T.
  • Phase difference between two points: Δφ = (2π/λ)Δx.
Read the full lesson

Lesson 3

Speed of a travelling wave: strings, solids and the speed of sound

v = ω/k = (2πν)/(2π/λ) = νλ = λ/T. In one period the wave advances one wavelength.

Speed of a transverse wave on a string: v = √(T/μ). It depends only on the tension and the mass per unit length, not on the frequency or wavelength.

Newton: v = √(P/ρ) (isothermal, too low). Laplace: v = √(γP/ρ) (adiabatic, agrees with measurement).

From medium to wave speed

  1. Identify the restoring property Tension T, bulk modulus B, or Young's modulus Y.
  2. Identify the inertia Linear density μ for a string, density ρ otherwise.
  3. Form the speed √(T/μ), √(B/ρ), √(Y/ρ); for gases B = γP.
  4. Use the source frequency λ = v/ν.
  • v = ω/k = νλ for every progressive wave.
  • String: v = √(T/μ). Fluid: v = √(B/ρ). Solid bar: v = √(Y/ρ).
  • Sound is faster in solids and liquids because their moduli are much larger relative to their densities.
  • In a gas the changes are adiabatic: v = √(γP/ρ) (Laplace), not √(P/ρ) (Newton).
Read the full lesson

Lesson 4

Superposition, interference, reflection and standing waves

Principle of superposition: when two or more waves overlap, the resultant displacement is the algebraic sum of the individual displacements, y = y₁ + y₂ + …, and each wave moves on as if the others were not there.

Incident: y = a sin(kx − ωt). Reflected at a rigid boundary: −a sin(kx − ωt) (phase change π). Reflected at an open boundary: a sin(kx − ωt) (no phase change).

Standing wave: y(x, t) = 2a sin kx cos ωt. Nodes (zero amplitude) at x = nλ/2; antinodes (amplitude 2a) at x = (n + ½)λ/2, n = 0, 1, 2, …

Travelling waves and standing waves

  • Travelling wave
    • y = a sin(kx − ωt)
    • Pattern moves at speed ω/k
    • Every particle has the same amplitude a
    • Phase changes steadily along x
    • Carries energy along
  • Standing wave
    • y = 2a sin kx cos ωt
    • Pattern stays in place
    • Amplitude 2a sin kx varies with position
    • Nodes never move; antinodes swing most
    • No net energy carried along
  • Superposition: displacements add algebraically; waves pass through each other unchanged.
  • Two equal waves with phase difference φ give amplitude 2a cos(φ/2): 2a in phase, 0 for φ = π.
  • Reflection at a rigid boundary inverts the wave (phase change π); at an open boundary there is no phase change.
  • Standing wave y = 2a sin kx cos ωt: nodes λ/2 apart, node to antinode λ/4.
Read the full lesson

Lesson 5

Normal modes of strings and air columns, and beats

String fixed at both ends: νₙ = n v/(2L), n = 1, 2, 3, … All harmonics are present. n = 1 is the fundamental (first harmonic).

Normal modes compared
SystemFundamentalHarmonics present
String fixed at both endsv/(2L)All: 1, 2, 3, …
Pipe open at both endsv/(2L)All: 1, 2, 3, …
Pipe closed at one endv/(4L)Odd only: 1, 3, 5, …

Beat frequency ν(beat) = ν₁ − ν₂ (the difference of the two frequencies).

Using beats to find an unknown frequency

  1. Count the beats ν(unknown) = ν(known) ± beat frequency: two possibilities.
  2. Change the unknown slightly Loading a fork with wax lowers its frequency; tightening a string raises it.
  3. Watch the beat rate Did the difference grow or shrink?
  4. Choose the consistent value Only one of the two possibilities fits the change.
  • String fixed at both ends and pipe open at both ends: νₙ = nv/(2L), all harmonics.
  • Pipe closed at one end: ν = (2n + 1)v/(4L), odd harmonics only; fundamental v/(4L).
  • A driving frequency near a natural frequency produces resonance.
  • Beats: ν(beat) = ν₁ − ν₂; use a small known change to decide which side the unknown lies.
Read the full lesson

Privacy · Terms · Refunds · Delivery