• Foundation
  • About 20 min
  • 5 practice questions

Superposition, interference, reflection and standing waves

Apply the principle of superposition, find the resultant amplitude 2a cos(φ/2) of two interfering waves, explain phase change on reflection at rigid and open boundaries, and analyse standing waves, nodes and antinodes.

If something looks wrong, please tell us.

By the end of this lesson you can

  • State the principle of superposition of waves.
  • Derive the resultant amplitude 2a cos(φ/2) and explain constructive and destructive interference.
  • Explain the phase change on reflection at a rigid boundary and at an open boundary.
  • Derive y = 2a sin kx cos ωt for a standing wave and locate its nodes and antinodes.

Two wave pulses on a rope can run into each other, pass through, and carry on unchanged. While they overlap, though, the rope takes shapes that neither pulse has alone. This simple rule of adding displacements explains interference, standing waves, musical notes and beats.

The principle of superposition

Principle of superposition: when two or more waves overlap, the resultant displacement is the algebraic sum of the individual displacements, y = y₁ + y₂ + …, and each wave moves on as if the others were not there.

If two equal and opposite pulses meet, there is an instant when their displacements cancel everywhere and the rope looks flat; a moment later both pulses reappear and continue.

Interference of two harmonic waves

  1. Take two waves of the same amplitude, frequency and wavelength, travelling along +x, differing only in phase: y₁ = a sin(kx − ωt) and y₂ = a sin(kx − ωt + φ).
  2. Add: y = a[sin(kx − ωt) + sin(kx − ωt + φ)].
  3. Using sin A + sin B = 2 sin[(A + B)/2] cos[(A − B)/2]: y = 2a cos(φ/2) sin(kx − ωt + φ/2).
  4. This is again a harmonic wave along +x with the same frequency and wavelength, but with amplitude A(φ) = 2a cos(φ/2).

If φ = 0 (in phase) the amplitude is 2a: constructive interference. If φ = π (completely out of phase) the amplitude is zero and the medium does not move at all: destructive interference. Intermediate phase differences give amplitudes between 0 and 2a.

Worked example 1: resultant amplitude

Two waves, each of amplitude 4.0 mm, overlap with phase difference π/3. A = 2a cos(φ/2) = 2 × 4.0 × cos(π/6) = 8.0 × 0.866 ≈ 6.9 mm. With φ = 2π/3 it would be 8.0 × cos(π/3) = 4.0 mm, and with φ = π, zero.

Reflection of waves

A pulse travelling along a string to a rigid support (a wall) is reflected inverted: a phase change of π. The end cannot move, so the incident and reflected waves must add to zero there at all times, which needs them to differ in phase by π. Dynamically, the pulse pulls on the wall and, by Newton's third law, the wall pulls back the opposite way, launching an inverted pulse. An echo is reflection at a rigid boundary. At a free (open) boundary, such as a string tied to a ring that slides freely on a rod, the pulse is reflected without a phase change, and the end moves with twice the amplitude. The open end of an organ pipe acts this way for sound. At the boundary between two different media, part of a wave is reflected and part transmitted; oblique transmitted waves are refracted and obey Snell's law.

Incident: y = a sin(kx − ωt). Reflected at a rigid boundary: −a sin(kx − ωt) (phase change π). Reflected at an open boundary: a sin(kx − ωt) (no phase change).

Standing (stationary) waves

When a wave is reflected back and forth between two boundaries, as on a string fixed at both ends, waves travelling in opposite directions overlap and set up a steady pattern. Take y₁ = a sin(kx − ωt) and y₂ = a sin(kx + ωt). Using sin(A + B) + sin(A − B) = 2 sin A cos B:

Standing wave: y(x, t) = 2a sin kx cos ωt. Nodes (zero amplitude) at x = nλ/2; antinodes (amplitude 2a) at x = (n + ½)λ/2, n = 0, 1, 2, …

Here kx and ωt appear separately, not as kx − ωt, so the pattern does not travel. Every element oscillates with the same frequency, in phase with the others on the same side of a node, but with an amplitude 2a sin kx that depends on its position. Nodes (sin kx = 0, kx = nπ) are points that never move; antinodes (|sin kx| = 1) have the largest amplitude. Adjacent nodes are λ/2 apart, adjacent antinodes are λ/2 apart, and a node and the next antinode are λ/4 apart.

Travelling waves and standing waves

  • Travelling wave
    • y = a sin(kx − ωt)
    • Pattern moves at speed ω/k
    • Every particle has the same amplitude a
    • Phase changes steadily along x
    • Carries energy along
  • Standing wave
    • y = 2a sin kx cos ωt
    • Pattern stays in place
    • Amplitude 2a sin kx varies with position
    • Nodes never move; antinodes swing most
    • No net energy carried along

Worked example 2: analysing a standing wave

A standing wave on a string is y = 0.04 sin(0.5πx) cos(200πt), in SI units. k = 0.5π rad m⁻¹, so λ = 2π/k = 4.0 m. Nodes at x = nλ/2 = 0, 2.0, 4.0 m …; antinodes at 1.0, 3.0 m …. ν = ω/2π = 100 Hz. Each of the two travelling waves that form it has amplitude 0.02 m and speed v = ω/k = 200π/0.5π = 400 m s⁻¹.

Key takeaways

  • Superposition: displacements add algebraically; waves pass through each other unchanged.
  • Two equal waves with phase difference φ give amplitude 2a cos(φ/2): 2a in phase, 0 for φ = π.
  • Reflection at a rigid boundary inverts the wave (phase change π); at an open boundary there is no phase change.
  • Standing wave y = 2a sin kx cos ωt: nodes λ/2 apart, node to antinode λ/4.

Check your understanding

  1. 1. Two waves of equal amplitude a and equal frequency travel in the same direction with a phase difference of π. What is the amplitude of the resultant wave?

    1. 2a
    2. a
    3. a√2
    4. Zero
    Show answer

    Answer: D. A = 2a cos(φ/2) = 2a cos(π/2) = 0. The waves cancel completely: destructive interference.

  2. 2. Two waves, each of amplitude 5.0 mm, overlap with a phase difference of 2π/3. The resultant amplitude is

    1. 10 mm
    2. 8.7 mm
    3. 5.0 mm
    4. 2.5 mm
    Show answer

    Answer: C. A = 2a cos(φ/2) = 2 × 5.0 × cos(π/3) = 10 × 0.5 = 5.0 mm.

  3. 3. A pulse on a string is reflected from an end that is rigidly fixed to a wall. The reflected pulse

    1. is inverted, with a phase change of π
    2. has the same orientation and no phase change
    3. has twice the amplitude
    4. does not exist; the wall absorbs it all
    Show answer

    Answer: A. The fixed end cannot move, so incident and reflected displacements must cancel there; this requires a phase change of π, so the pulse comes back upside down.

  4. 4. In a standing wave of wavelength λ, what is the distance between a node and the nearest antinode?

    1. λ
    2. λ/2
    3. λ/4
    4. 2λ
    Show answer

    Answer: C. Nodes are at x = nλ/2 and antinodes halfway between them, at (n + ½)λ/2, so a node and the next antinode are λ/4 apart.

  5. 5. Which statement about a standing wave is correct?

    1. Every particle oscillates with the same amplitude
    2. Points called nodes never move, and amplitude varies with position
    3. The wave pattern travels along the string at speed ω/k
    4. It is formed by two waves travelling in the same direction
    Show answer

    Answer: B. y = 2a sin kx cos ωt: the amplitude 2a sin kx depends on x and is zero at the nodes, and the pattern does not travel. It is formed by two equal waves moving in opposite directions.

Privacy · Terms · Refunds · Delivery