• Foundation
  • About 18 min
  • 5 practice questions

Bonding by valence bond theory and magnetic properties

Use valence bond theory to explain the hybridisation, shape and magnetic behaviour of complexes, distinguish inner and outer orbital complexes, use magnetic moments to decide geometry, and state the limitations of VBT.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Match coordination number and hybridisation to shape: sp³, dsp², sp³d², d²sp³.
  • Explain why [Co(NH₃)₆]³⁺ is diamagnetic (inner orbital) and [CoF₆]³⁻ paramagnetic (outer orbital).
  • Explain the shapes and magnetism of [Ni(CN)₄]²⁻, [NiCl₄]²⁻ and [Ni(CO)₄].
  • Use a measured magnetic moment to predict geometry, and list the limitations of VBT.

Why are some complexes square planar and others tetrahedral, and why is one cobalt(III) complex diamagnetic while another is strongly attracted by a magnet? Werner could not answer such questions. Valence bond theory (VBT) gives a simple picture based on hybrid orbitals of the metal accepting electron pairs from the ligands.

The idea of valence bond theory

Under the influence of the ligands, the metal atom or ion uses its (n−1)d, ns and np orbitals, or ns, np and nd orbitals, to form a set of equivalent hybrid orbitals of definite geometry. Each hybrid orbital accepts a lone pair from a ligand, forming a coordinate bond. (Hybridisation is a mathematical way of combining orbitals; hybrid orbitals are a model, not separate real objects.)

Hybridisation and shape
Coordination numberHybridisationShape
4sp³Tetrahedral
4dsp²Square planar
5sp³dTrigonal bipyramidal
6sp³d² (outer d orbitals, nd)Octahedral
6d²sp³ (inner d orbitals, (n−1)d)Octahedral

Octahedral complexes: inner and outer orbital

[Co(NH₃)₆]³⁺. Co³⁺ is 3d⁶. The ammonia ligands cause the six d electrons to pair up in three 3d orbitals, leaving two 3d orbitals empty. These combine with 4s and three 4p orbitals: d²sp³ hybridisation, octahedral. Six NH₃ lone pairs fill the hybrids. No unpaired electrons, so the complex is diamagnetic. Because inner (3d) orbitals are used, it is an inner orbital (low spin, spin-paired) complex.

[CoF₆]³⁻. Also Co³⁺, 3d⁶, but fluoride does not force pairing. The 3d set keeps four unpaired electrons, so the outer 4d orbitals are used: sp³d² hybridisation, octahedral. Four unpaired electrons make it paramagnetic. It is an outer orbital (high spin, spin-free) complex.

Two octahedral cobalt(III) complexes

  • [Co(NH₃)₆]³⁺
    • Co³⁺: 3d⁶, electrons paired
    • d²sp³ (inner orbital)
    • Low spin, 0 unpaired electrons
    • Diamagnetic
  • [CoF₆]³⁻
    • Co³⁺: 3d⁶, electrons not paired
    • sp³d² (outer orbital)
    • High spin, 4 unpaired electrons
    • Paramagnetic, about 4.90 BM

Four-coordinate complexes of nickel

  • [NiCl₄]²⁻: Ni²⁺ is 3d⁸ with two unpaired electrons. One 4s and three 4p orbitals form sp³ hybrids: tetrahedral, paramagnetic (two unpaired electrons).
  • [Ni(CN)₄]²⁻: cyanide forces the two unpaired 3d electrons to pair, freeing one 3d orbital. dsp² hybridisation: square planar, diamagnetic.
  • [Ni(CO)₄]: nickel is in the zero state (3d⁸ 4s²); CO causes the 4s electrons to pair into 3d, giving 3d¹⁰. sp³: tetrahedral, diamagnetic.

Magnetic data and complications

Magnetic susceptibility measurements give the number of unpaired electrons and so help decide structures. For d¹ to d³ ions (Ti³⁺, V³⁺, Cr³⁺), two 3d orbitals are always free for d²sp³ hybridisation, and the complexes have the same number of unpaired electrons as the free ion. For d⁴ to d⁶ ions, a pair of empty 3d orbitals is available only if electrons pair up, which leaves 2, 1 or 0 unpaired electrons. Real complexes differ: [Mn(CN)₆]³⁻ has two unpaired electrons but [MnCl₆]³⁻ has four; [Fe(CN)₆]³⁻ has one but [FeF₆]³⁻ has five; [Co(C₂O₄)₃]³⁻ is diamagnetic but [CoF₆]³⁻ has four. VBT explains this by saying the cyanide and oxalate complexes are inner orbital (d²sp³) and the halide complexes outer orbital (sp³d²).

Worked example 1: [Fe(CN)₆]³⁻ and [FeF₆]³⁻

Predict the hybridisation and spin-only magnetic moment of each.

Both contain Fe³⁺: 3d⁵.
[Fe(CN)₆]³⁻: cyanide pairs the electrons into three 3d orbitals (2 + 2 + 1), leaving two 3d orbitals empty → d²sp³, inner orbital, n = 1, μ = √(1 × 3) = 1.73 BM.
[FeF₆]³⁻: no pairing; five unpaired 3d electrons; uses 4d → sp³d², outer orbital, n = 5, μ = √(5 × 7) = 5.92 BM.

Worked example 2: shape from magnetic moment

[CoCl₄]²⁻ has a magnetic moment of about 3.9 BM. Is it tetrahedral or square planar?

Co²⁺ is 3d⁷. √[n(n + 2)] ≈ 3.9 gives n = 3 (3.87 BM).
If it were square planar (dsp²), one 3d orbital would have to be emptied, forcing pairing and leaving only 1 unpaired electron (1.73 BM).
Tetrahedral (sp³) leaves the 3d⁷ arrangement untouched with 3 unpaired electrons. So the complex is tetrahedral.

Limitations of valence bond theory

  • It involves several assumptions.
  • It gives no quantitative interpretation of magnetic data.
  • It does not explain the colours of coordination compounds.
  • It gives no quantitative account of thermodynamic or kinetic stability.
  • It does not predict exactly whether a 4-coordinate complex is tetrahedral or square planar.
  • It does not distinguish between weak and strong ligands.

Key takeaways

  • sp³ tetrahedral, dsp² square planar, d²sp³ (inner) and sp³d² (outer) octahedral.
  • Strong ligands such as CN⁻, NH₃ (for Co³⁺) and C₂O₄²⁻ (for Co³⁺) pair electrons: inner orbital, low spin.
  • Weak ligands such as F⁻ and Cl⁻ leave electrons unpaired: outer orbital, high spin.
  • Measured magnetic moments reveal unpaired electrons and help decide geometry.

Check your understanding

  1. 1. What are the hybridisation and magnetic behaviour of [Ni(CN)₄]²⁻?

    1. sp³, paramagnetic
    2. dsp², diamagnetic
    3. sp³, diamagnetic
    4. d²sp³, paramagnetic
    Show answer

    Answer: B. Ni²⁺ is 3d⁸. Strong-field CN⁻ pairs the two unpaired electrons, leaving one 3d orbital free for dsp² hybridisation. The complex is square planar with no unpaired electrons, i.e. diamagnetic.

  2. 2. Both [NiCl₄]²⁻ and [Ni(CO)₄] are tetrahedral. Which statement correctly compares them?

    1. Ni is +2 with two unpaired 3d electrons in [NiCl₄]²⁻, but Ni(0) becomes 3d¹⁰ under CO in [Ni(CO)₄]
    2. Cl⁻ is a stronger ligand than CO
    3. [Ni(CO)₄] is square planar
    4. Ni in [NiCl₄]²⁻ has zero oxidation state
    Show answer

    Answer: A. In [NiCl₄]²⁻, Ni²⁺ (3d⁸) keeps two unpaired electrons because Cl⁻ is weak. In [Ni(CO)₄], nickel is in the zero state and strong CO ligands move the 4s² electrons into 3d, giving 3d¹⁰ with all electrons paired.

  3. 3. Which complex is an outer orbital complex?

    1. [Co(NH₃)₆]³⁺
    2. [Fe(CN)₆]³⁻
    3. [Co(C₂O₄)₃]³⁻
    4. [FeF₆]³⁻
    Show answer

    Answer: D. In [FeF₆]³⁻ the weak fluoride ligands do not pair the five 3d electrons of Fe³⁺, so the outer 4d orbitals are used: sp³d², an outer orbital (high spin) complex. The other three use inner 3d orbitals (d²sp³).

  4. 4. What is the spin-only magnetic moment of [CoF₆]³⁻?

    1. 0 BM
    2. 2.83 BM
    3. 4.90 BM
    4. 5.92 BM
    Show answer

    Answer: C. Co³⁺ is 3d⁶. With weak F⁻, the electrons stay spread out: two paired in one orbital and four unpaired. μ = √[4 × 6] = √24 = 4.90 BM.

  5. 5. Assertion (A): Valence bond theory cannot explain why [Ti(H₂O)₆]³⁺ is violet. Reason (R): Valence bond theory does not consider the splitting of d orbitals by ligands.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true. VBT describes bonds through hybrid orbitals and has nothing to say about electronic transitions between d levels, so it cannot account for colour. Crystal field theory, which splits the d orbitals, does. R explains A.

Privacy · Terms · Refunds · Delivery