• Foundation
  • About 20 min
  • 5 practice questions

Crystal field theory, colour, metal carbonyls and uses of complexes

Explain d-orbital splitting in octahedral and tetrahedral fields, use Δo and pairing energy with the spectrochemical series to predict high- and low-spin configurations and colour, describe bonding in metal carbonyls and list important applications of coordination compounds.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain the splitting of d orbitals into t₂g and e_g in an octahedral field, and the inverted, smaller splitting in a tetrahedral field.
  • Use Δo versus P and the spectrochemical series to predict high- or low-spin configurations and unpaired electrons.
  • Explain the colour of complexes and calculate Δo from the wavelength absorbed.
  • Describe synergic bonding in metal carbonyls and give applications of coordination compounds.

Anhydrous copper sulphate is white, but the hydrated salt is blue. Adding ethane-1,2-diamine step by step to green nickel(II) solution turns it pale blue, then blue-purple, then violet. Crystal field theory (CFT) explains such colour changes, and also the magnetism that VBT handled only qualitatively.

The crystal field model

CFT treats the metal–ligand bond as purely electrostatic. Anionic ligands are treated as point charges and neutral ligands as point dipoles. In a free ion the five d orbitals have the same energy (they are degenerate). A spherical field would raise them all equally, but the field from ligands in a definite geometry is not spherical, so the d orbitals split into groups of different energy.

Splitting in an octahedral field

Six ligands approach along the x, y and z axes. The d(x²−y²) and d(z²) orbitals point straight at the ligands, are repelled more and rise in energy: the e_g set. The d(xy), d(yz), d(xz) orbitals point between the axes and fall in energy: the t₂g set. The gap is the crystal field splitting, Δo. Relative to the average, e_g rises by (3/5)Δo and t₂g falls by (2/5)Δo.

d orbitals in an octahedral field

  1. Free ion Five degenerate d orbitals.
  2. Spherical field All five raised equally.
  3. Octahedral field e_g (d(x²−y²), d(z²)) up by 0.6Δo; t₂g (d(xy), d(yz), d(xz)) down by 0.4Δo.

Δo depends on the ligand and the charge on the metal ion. Ligands arranged in order of increasing field strength form the spectrochemical series, found experimentally from light absorption:
I⁻ < Br⁻ < SCN⁻ < Cl⁻ < S²⁻ < F⁻ < OH⁻ < C₂O₄²⁻ < H₂O < NCS⁻ < edta⁴⁻ < NH₃ < en < CN⁻ < CO.

High spin and low spin

For d¹, d² and d³ ions, electrons simply enter t₂g singly (Hund's rule). For d⁴, the fourth electron has a choice. It can pair in t₂g, costing the pairing energy P, or go up to e_g, costing Δo.
• If Δo < P (weak field ligands), it enters e_g: t₂g³ e_g¹, a high spin complex.
• If Δo > P (strong field ligands), it pairs in t₂g: t₂g⁴ e_g⁰, a low spin complex.
The same choice arises for d⁵ to d⁷, and calculations show such complexes are more stable in strong fields.

Octahedral configurations for d⁴ to d⁷
dⁿWeak field (high spin)UnpairedStrong field (low spin)Unpaired
d⁴t₂g³ e_g¹4t₂g⁴2
d⁵t₂g³ e_g²5t₂g⁵1
d⁶t₂g⁴ e_g²4t₂g⁶0
d⁷t₂g⁵ e_g²3t₂g⁶ e_g¹1

Worked example 1: [Mn(H₂O)₆]²⁺ versus [Mn(CN)₆]⁴⁻

Explain why [Mn(H₂O)₆]²⁺ has five unpaired electrons but [Mn(CN)₆]⁴⁻ has one.

Both contain Mn²⁺, d⁵. H₂O is a weak field ligand (Δo < P): t₂g³ e_g², five unpaired electrons, μ = 5.92 BM. CN⁻ is a strong field ligand (Δo > P): all five electrons crowd into t₂g as t₂g⁵, leaving one unpaired, μ = 1.73 BM.

Splitting in a tetrahedral field

In a tetrahedral complex the splitting is inverted (the e set is lower, the t₂ set higher) and smaller: for the same metal, ligands and distances, Δt = (4/9)Δo. Because Δt is usually smaller than the pairing energy, low spin tetrahedral complexes are rarely seen. (The subscript g is used only for octahedral and square planar complexes, which have a centre of symmetry.)

Colour of coordination compounds

A complex absorbs part of the visible spectrum, and we see the complementary colour. In CFT, the absorbed energy promotes an electron from t₂g to e_g: a d–d transition. [Ti(H₂O)₆]³⁺ (d¹) has its electron in t₂g; it absorbs blue-green light (about 498 nm) to reach t₂g⁰ e_g¹, so it looks violet. The ligand sets Δo, so it sets the colour. Without ligands there is no splitting: heating [Ti(H₂O)₆]Cl₃ to remove water makes it colourless, and anhydrous CuSO₄ is white while CuSO₄·5H₂O is blue. In nickel(II) solutions, replacing water by the stronger en ligand step by step increases Δo and changes the colour from green ([Ni(H₂O)₆]²⁺) through pale blue and blue-purple to violet ([Ni(en)₃]²⁺).

Worked example 2: Δo from the colour

[Ti(H₂O)₆]³⁺ absorbs most strongly at 498 nm. Estimate Δo in kJ mol⁻¹. (h = 6.626 × 10⁻³⁴ J s, c = 3.0 × 10⁸ m s⁻¹, N_A = 6.022 × 10²³ mol⁻¹)

Energy per photon E = hc ÷ λ = (6.626 × 10⁻³⁴ × 3.0 × 10⁸) ÷ (498 × 10⁻⁹) = 3.99 × 10⁻¹⁹ J.
Per mole: 3.99 × 10⁻¹⁹ × 6.022 × 10²³ = 2.40 × 10⁵ J mol⁻¹ = about 240 kJ mol⁻¹.

Gemstones. Ruby is aluminium oxide with about 0.5–1% Cr³⁺ (d³) ions in octahedral sites; d–d transitions give its red colour. In emerald, Cr³⁺ sits in octahedral sites of the mineral beryl (Be₃Al₂Si₆O₁₈); the absorption bands shift to longer wavelength and the stone transmits green light.

Limitations of crystal field theory

If ligands were simple point charges, anions should cause the largest splitting, yet anionic ligands such as I⁻, Br⁻ and Cl⁻ are at the weak end of the spectrochemical series. CFT also ignores the covalent character of metal–ligand bonding. Ligand field theory and molecular orbital theory address these weaknesses.

Bonding in metal carbonyls

Most transition metals form homoleptic carbonyls with simple structures: [Ni(CO)₄] is tetrahedral, [Fe(CO)₅] trigonal bipyramidal and [Cr(CO)₆] octahedral; [Mn₂(CO)₁₀] is two square pyramidal Mn(CO)₅ units joined by a Mn–Mn bond, and [Co₂(CO)₈] has a Co–Co bond bridged by two CO groups. The M–C bond has both σ and π character: the σ bond forms when the carbon lone pair of CO is donated into an empty metal orbital; the π bond forms when a filled metal d orbital donates electrons back into the empty antibonding π* orbital of CO. This two-way synergic bonding strengthens the metal–carbon bond.

Synergic bonding in a metal carbonyl

  1. σ donation CO's carbon lone pair enters an empty metal orbital.
  2. Metal gains electron density Its filled d orbitals become better donors.
  3. π back-donation Metal d electrons flow into CO's empty π* orbital.
  4. Stronger M–C bond Back-donation strengthens σ donation in turn.

Then back to step 1: σ donation

Importance and applications

  • Analysis: colour reactions with chelating reagents such as EDTA, DMG (dimethylglyoxime), α-nitroso-β-naphthol and cupron detect and estimate metals. Hardness of water is found by titration with Na₂EDTA, since Ca²⁺ and Mg²⁺ form stable EDTA complexes.
  • Metallurgy: gold is extracted as [Au(CN)₂]⁻ (cyanide, oxygen and water) and recovered by adding zinc; impure nickel is purified via volatile [Ni(CO)₄], which is decomposed to pure nickel.
  • Biology: chlorophyll (Mg), haemoglobin (Fe) and vitamin B₁₂, cyanocobalamin (Co); enzymes such as carboxypeptidase A and carbonic anhydrase contain coordinated metal ions.
  • Catalysis: Wilkinson's catalyst, [(Ph₃P)₃RhCl], hydrogenates alkenes.
  • Electroplating: smooth, even silver and gold coatings from [Ag(CN)₂]⁻ and [Au(CN)₂]⁻.
  • Photography: hypo (sodium thiosulphate) fixes film by dissolving unexposed AgBr as [Ag(S₂O₃)₂]³⁻.
  • Medicine: chelate therapy removes excess metals (D-penicillamine and desferrioxime B for copper and iron; EDTA for lead poisoning); cis-platin and related platinum complexes inhibit tumour growth.

Key takeaways

  • Octahedral: e_g up 0.6Δo, t₂g down 0.4Δo; tetrahedral: inverted and Δt = (4/9)Δo.
  • Δo > P (strong field, e.g. CN⁻, CO): low spin; Δo < P (weak field, e.g. I⁻, Cl⁻, F⁻): high spin.
  • Colour = complementary to light absorbed in a d–d transition; no ligands, no splitting, no colour.
  • Carbonyls are held by σ donation plus π back-donation (synergic bonding).

Check your understanding

  1. 1. In an octahedral crystal field, which d orbitals form the higher-energy e_g set?

    1. d(xy) and d(yz)
    2. d(xy), d(yz) and d(xz)
    3. d(xz) and d(z²)
    4. d(x²−y²) and d(z²)
    Show answer

    Answer: D. In an octahedral complex the ligands lie along the axes. d(x²−y²) and d(z²) point along the axes, straight at the ligands, so they are repelled most and form the higher e_g set.

  2. 2. How many unpaired electrons are present in the low-spin octahedral complex [Fe(CN)₆]⁴⁻?

    1. 4
    2. 2
    3. 0
    4. 1
    Show answer

    Answer: C. Fe²⁺ is d⁶. CN⁻ is a strong field ligand (Δo > P), so all six electrons pair in the t₂g set: t₂g⁶ e_g⁰. There are no unpaired electrons; the complex is diamagnetic.

  3. 3. Why are low-spin tetrahedral complexes rarely observed?

    1. Tetrahedral complexes have no d orbitals
    2. The tetrahedral splitting is small, Δt = (4/9)Δo, usually less than the pairing energy
    3. Tetrahedral ligands are always strong field
    4. Tetrahedral complexes are always diamagnetic
    Show answer

    Answer: B. With only four ligands, none pointing directly at any d orbital, the splitting is small (four-ninths of Δo). It is rarely large enough to beat the pairing energy, so electrons stay unpaired and complexes are high spin.

  4. 4. Anhydrous CuSO₄ is white but CuSO₄·5H₂O is blue. What is the best explanation?

    1. Without water ligands there is no crystal field splitting of the d orbitals, so no d–d transition occurs in visible light
    2. Anhydrous CuSO₄ contains Cu⁺
    3. Water itself is blue
    4. Anhydrous CuSO₄ has no d electrons
    Show answer

    Answer: A. The blue colour comes from d–d transitions in Cu²⁺ (d⁹) whose d orbitals are split by surrounding water ligands. Remove the water and that splitting, which produced absorption in the visible region, is lost; the anhydrous salt appears white.

  5. 5. Assertion (A): The metal–carbon bond in metal carbonyls has both σ and π character. Reason (R): CO donates its carbon lone pair to the metal, and the metal donates d electrons back into the empty π* orbital of CO.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true. The ligand-to-metal σ donation and the metal-to-ligand π back-donation together form the synergic bond, which is why the M–C bond has both characters. R explains A.

Privacy · Terms · Refunds · Delivery