• Foundation
  • About 18 min
  • 5 practice questions

IUPAC nomenclature of coordination compounds

Write formulas of mononuclear coordination entities and name coordination compounds systematically using IUPAC rules for ligand names, order, multipliers, oxidation state and -ate endings.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Apply the rules for writing formulas of coordination entities.
  • Name anionic, neutral and cationic ligands (chlorido, aqua, ammine, carbonyl ...).
  • Use di/tri/tetra and bis/tris/tetrakis correctly and order ligands alphabetically.
  • Name complex cations, anions and neutral complexes, using -ate and Latin names where needed.

A single formula such as CoCl₃·4NH₃ can stand for two different compounds, so coordination chemists need names that say exactly which groups are attached to the metal and in what state the metal is. The International Union of Pure and Applied Chemistry (IUPAC) gives the rules. They are like a recipe: follow the steps in order and every name comes out the same.

Writing formulas

  1. The central atom is listed first.
  2. Ligands follow in alphabetical order, whatever their charge.
  3. Polydentate ligands are also placed alphabetically; for an abbreviated ligand (en, ox), the first letter of the abbreviation decides its place.
  4. The whole coordination entity, charged or not, goes in square brackets; polyatomic ligands and ligand abbreviations go in parentheses.
  5. No spaces between the ligands and the metal inside the bracket.
  6. A charged entity written without its counter ion shows the charge as a right superscript, number before sign: [Co(CN)₆]³⁻.
  7. The charges of cations and anions must balance.

Naming: the rules

  1. Name the cation first, then the anion, whether the complex part is the cation or the anion.
  2. Inside the entity, name the ligands first, in alphabetical order, then the metal (the reverse of the formula).
  3. Anionic ligands end in -o (2004 IUPAC: -ido): chlorido, cyanido, hydroxido, oxalato. Neutral ligands keep their names, except aqua (H₂O), ammine (NH₃), carbonyl (CO) and nitrosyl (NO).
  4. Use di, tri, tetra for simple ligands; use bis, tris, tetrakis with the ligand in parentheses when its name already contains a number, e.g. bis(ethane-1,2-diamine). Multiplying prefixes are ignored in alphabetical ordering.
  5. Give the oxidation state of the metal in Roman numerals in parentheses, for cations, anions and neutral complexes alike.
  6. In a complex cation or neutral complex, the metal keeps its element name (cobalt, platinum). In a complex anion, it ends in -ate (cobaltate, nickelate, zincate), and some use Latin roots: ferrate (Fe), cuprate (Cu), argentate (Ag), aurate (Au), plumbate (Pb), stannate (Sn).
Common ligand names
LigandFormulaName in a complexCharge
ChlorideCl⁻chlorido−1
CyanideCN⁻cyanido−1
HydroxideOH⁻hydroxido−1
OxalateC₂O₄²⁻oxalato−2
Nitrite (via N)NO₂⁻nitrito-N−1
Nitrite (via O)ONO⁻nitrito-O−1
Thiocyanate (via S)SCN⁻thiocyanato-S−1
WaterH₂Oaqua0
AmmoniaNH₃ammine0
Carbon monoxideCOcarbonyl0
Ethane-1,2-diamineenethane-1,2-diamine0

Steps to name a coordination compound

  1. Find the charge on the entity From the counter ions.
  2. Find the metal's oxidation state Subtract the ligand charges from the entity's charge.
  3. List ligands alphabetically Add di/tri/tetra or bis/tris prefixes.
  4. Name the metal Element name if cation or neutral; -ate ending if anion.
  5. Add the oxidation state Roman numerals in parentheses; then name the counter ion.

Worked example 1: a complex cation

Name [Cr(H₂O)₄Cl₂]Cl.

One Cl⁻ outside, so the entity is +1. Ligands: four H₂O (0) and two Cl⁻ (−1 each). x + 0 − 2 = +1 → x = +3.
Alphabetical: aqua (a) before chlorido (c). The entity is a cation, so the metal is 'chromium'.
Name: tetraaquadichloridochromium(III) chloride.

Worked example 2: a complex anion

Name K₂[NiCl₄] and K₄[Fe(CN)₆].

K₂[NiCl₄]: entity charge −2; x − 4 = −2 → x = +2. Anion, so 'nickelate'. Name: potassium tetrachloridonickelate(II).
K₄[Fe(CN)₆]: entity −4; x − 6 = −4 → x = +2. Anion of iron uses the Latin root: potassium hexacyanidoferrate(II).

Worked example 3: a didentate ligand and an ambidentate ligand

Name [CoCl(NO₂)(en)₂]Cl, where nitrite is bound through nitrogen.

Entity charge +1. x − 1 − 1 + 0 = +1 → x = +3.
Ligands alphabetically: chlorido (c), ethane-1,2-diamine (e), nitrito-N (n). Because 'ethane-1,2-diamine' contains a number, use bis with parentheses.
Name: chloridobis(ethane-1,2-diamine)nitrito-N-cobalt(III) chloride.

Worked example 4: names to formulas

Write formulas for (a) tetraamminecopper(II) sulphate, (b) potassium hexacyanidoferrate(III), (c) pentacarbonyliron(0), (d) tetraammineplatinum(II) tetrachloridoplatinate(II).
(a) Cu²⁺ + 4NH₃ gives a +2 cation; one SO₄²⁻ balances it: [Cu(NH₃)₄]SO₄.
(b) Fe³⁺ + 6CN⁻ gives a −3 anion; three K⁺: K₃[Fe(CN)₆].
(c) Fe(0) with five neutral CO: [Fe(CO)₅].
(d) A +2 cation and a −2 anion: [Pt(NH₃)₄][PtCl₄].

Key takeaways

  • Formula: metal first, then ligands; name: ligands first (alphabetical), then metal.
  • Anionic ligands end in -o/-ido; H₂O = aqua, NH₃ = ammine, CO = carbonyl, NO = nitrosyl.
  • bis/tris/tetrakis for ligands whose names contain numbers; prefixes do not affect alphabetical order.
  • Anionic complexes end in -ate (ferrate, cuprate, argentate); always give the oxidation state.

Check your understanding

  1. 1. What is the IUPAC name of [Cr(NH₃)₆]Cl₃?

    1. Hexaamminechromium(III) chloride
    2. Hexaamminechromate(III) chloride
    3. Chromium hexaammine trichloride
    4. Hexaamminechromium(II) chloride
    Show answer

    Answer: A. The entity is +3 (three Cl⁻ outside) and NH₃ is neutral, so chromium is +3. NH₃ is named 'ammine'. The entity is a cation, so the metal keeps the name 'chromium': hexaamminechromium(III) chloride.

  2. 2. What is the correct formula of sodium hexafluoridoaluminate(III)?

    1. Na[AlF₆]
    2. Na₃[AlF₆]
    3. Na₂[AlF₆]
    4. Na₃[AlF₄]
    Show answer

    Answer: B. Al³⁺ with six F⁻ gives a charge of +3 − 6 = −3, so three Na⁺ ions are needed: Na₃[AlF₆].

  3. 3. In naming a complex anion of copper, which name is used for the metal?

    1. copperate
    2. coppate
    3. cuprite
    4. cuprate
    Show answer

    Answer: D. In complex anions the metal takes the -ate ending, and for copper the Latin root is used: cuprate, e.g. tetrachloridocuprate(II).

  4. 4. Which prefix is correct for two ethane-1,2-diamine ligands in a name?

    1. di
    2. tris
    3. bis
    4. tetra
    Show answer

    Answer: C. When the ligand's name already contains a number (ethane-1,2-diamine), the prefixes bis, tris, tetrakis are used with the ligand in parentheses: bis(ethane-1,2-diamine).

  5. 5. What is the IUPAC name of [Ag(NH₃)₂]Cl?

    1. Diamminesilver(I) chloride
    2. Diammineargentate(I) chloride
    3. Silver diammine chloride
    4. Diamminesilver(II) chloride
    Show answer

    Answer: A. The entity is +1 and NH₃ is neutral, so silver is +1. It is a cation, so the metal is named 'silver', not 'argentate' (which is used only in anions): diamminesilver(I) chloride.

Sign in to keep track of the lessons you finish.

Next lesson → Isomerism in coordination compounds

Privacy · Terms · Refunds · Delivery