• Foundation
  • About 30 min
  • 15 practice questions

Final self-assessment: Haloalkanes and Haloarenes

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Attempt all 15 questions in one sitting of about 30 minutes, without looking back at the lessons. The questions mix all five lessons, include reasoning about mechanisms and some calculations, and are harder on average than the lesson checks. Mark your answers first, then read every explanation.

Final self-assessment

  1. 1. How many structural isomers (including both chain types) have the formula C₄H₉Br, and how many of them are tertiary?

    1. 3 isomers, 1 tertiary
    2. 4 isomers, 2 tertiary
    3. 4 isomers, 1 tertiary
    4. 5 isomers, 1 tertiary
    Show answer

    Answer: C. 1-Bromobutane (1°), 2-bromobutane (2°), 1-bromo-2-methylpropane (1°) and 2-bromo-2-methylpropane (3°): four isomers, of which only one is tertiary.

  2. 2. Which compound has the lowest boiling point?

    1. 1-Bromobutane
    2. 2-Bromobutane
    3. 1-Bromo-2-methylpropane
    4. 2-Bromo-2-methylpropane
    Show answer

    Answer: D. All have the same molar mass. Boiling point falls with branching because more compact molecules have less surface contact and weaker van der Waals forces. 2-Bromo-2-methylpropane is the most branched.

  3. 3. Assertion (A): The C–I bond is the weakest carbon–halogen bond. Reason (R): Iodine is the largest halogen, so the C–I bond is the longest.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true. The large iodine atom forms a long bond (214 pm in CH₃I) with poor overlap, and its bond enthalpy is the lowest (234 kJ mol⁻¹). R explains A.

  4. 4. Which pair of reagents would give a pure alkyl chloride from an alcohol most conveniently?

    1. Cl₂ and UV light
    2. SOCl₂
    3. HCl without catalyst for a primary alcohol
    4. NaCl in acetone
    Show answer

    Answer: B. Thionyl chloride gives R–Cl with gaseous SO₂ and HCl, which escape, leaving the pure product. Cl₂/UV acts on alkanes, a primary alcohol with HCl needs ZnCl₂, and NaCl in acetone is not a chlorinating method.

  5. 5. CH₃CH₂Cl is heated with AgF. What type of reaction occurs and what is the product?

    1. Finkelstein reaction; CH₃CH₂I
    2. Wurtz reaction; butane
    3. Swarts reaction; CH₃CH₂F
    4. Sandmeyer reaction; CH₃CH₂F
    Show answer

    Answer: C. Heating an alkyl chloride or bromide with a metallic fluoride such as AgF, Hg₂F₂, CoF₂ or SbF₃ exchanges the halogen for fluorine: the Swarts reaction, giving fluoroethane.

  6. 6. Which reagent converts benzenediazonium chloride into iodobenzene?

    1. KI
    2. CuI with HI
    3. I₂ with FeCl₃
    4. NaI in acetone
    Show answer

    Answer: A. Unlike chloride and bromide, which need Cu₂Cl₂ or Cu₂Br₂ (Sandmeyer), iodine is introduced simply by shaking the diazonium salt with potassium iodide.

  7. 7. Haloalkanes react with KCN to give mainly alkyl cyanides but with AgCN to give mainly isocyanides. Why?

    1. AgCN is ionic and KCN is covalent
    2. KCN is ionic and its free CN⁻ attacks through carbon, while covalent AgCN can only attack through nitrogen
    3. Silver catalyses rearrangement of the nitrile
    4. Isocyanides are more stable than nitriles
    Show answer

    Answer: B. KCN supplies free CN⁻, which attacks through carbon because the C–C bond formed is more stable. In covalent AgCN the carbon is bonded to silver, leaving the nitrogen lone pair free to attack, so R–NC forms.

  8. 8. For the hydrolysis of CH₃CH₂Br by OH⁻ (SN2), the rate is 2.0 × 10⁻⁵ mol L⁻¹ s⁻¹. What is the rate if [CH₃CH₂Br] is doubled and [OH⁻] is halved?

    1. 4.0 × 10⁻⁵ mol L⁻¹ s⁻¹
    2. 1.0 × 10⁻⁵ mol L⁻¹ s⁻¹
    3. 8.0 × 10⁻⁵ mol L⁻¹ s⁻¹
    4. 2.0 × 10⁻⁵ mol L⁻¹ s⁻¹
    Show answer

    Answer: D. Rate = k[RX][OH⁻]. New rate = k(2[RX])(½[OH⁻]) = k[RX][OH⁻], the same as before: 2.0 × 10⁻⁵ mol L⁻¹ s⁻¹.

  9. 9. Which order of SN2 reactivity is correct?

    1. 1-Bromopentane > 2-bromopentane > 2-bromo-2-methylbutane
    2. 2-Bromo-2-methylbutane > 2-bromopentane > 1-bromopentane
    3. 2-Bromopentane > 1-bromopentane > 2-bromo-2-methylbutane
    4. All react at the same rate
    Show answer

    Answer: A. SN2 is slowed by crowding at the reacting carbon: primary (1-bromopentane) > secondary (2-bromopentane) > tertiary (2-bromo-2-methylbutane).

  10. 10. An optically active halide reacts by SN2 to give a product with the inverted configuration. If the same halide reacted by SN1 instead, what would be obtained?

    1. Only the product with retained configuration
    2. Only the inverted product
    3. A racemic mixture
    4. No product
    Show answer

    Answer: C. SN1 goes through a planar, achiral carbocation, which the nucleophile attacks equally from both sides, giving equal amounts of both enantiomers: a racemic mixture.

  11. 11. A sample contains 80% of the (−) enantiomer and 20% of the (+) enantiomer of a compound whose pure (−) form rotates light by −20°. What rotation does the sample show?

    1. −16°
    2. −12°
    3. −20°
    4. −4°
    Show answer

    Answer: B. The 20% (+) cancels 20% (−), leaving a 60% excess of the (−) form. Rotation = 0.60 × (−20°) = −12°.

  12. 12. Assertion (A): Alcoholic KOH converts 2-chlorobutane mainly into but-2-ene. Reason (R): In dehydrohalogenation, the more substituted alkene is the preferred product.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true. Elimination can give but-1-ene or but-2-ene; Zaitsev's rule favours the alkene with more alkyl groups on the double bond, but-2-ene. R explains A.

  13. 13. Which compound reacts with aqueous NaOH most readily, replacing chlorine by –OH?

    1. Chlorobenzene
    2. 4-Chlorotoluene
    3. 1-Chloro-3-nitrobenzene
    4. 1-Chloro-2,4,6-trinitrobenzene
    Show answer

    Answer: D. Three nitro groups at the two ortho and the para positions strongly stabilise the negatively charged intermediate, so the substitution needs only mild conditions. Chlorobenzene needs 623 K and 300 atm; a meta nitro or a methyl group gives no such help.

  14. 14. What is formed when a mixture of chlorobenzene and chloroethane is treated with sodium in dry ether?

    1. Ethylbenzene, by the Wurtz–Fittig reaction (with some butane and biphenyl)
    2. Phenol
    3. Only biphenyl
    4. Chlorotoluene
    Show answer

    Answer: A. An aryl halide and an alkyl halide with sodium in dry ether join the two groups: C₆H₅Cl + C₂H₅Cl + 2Na → C₆H₅C₂H₅ + 2NaCl (Wurtz–Fittig). The like couplings (butane, biphenyl) form as side products.

  15. 15. Which statement about DDT is correct?

    1. It is rapidly broken down by animals
    2. It is water-soluble and washes out of the body quickly
    3. It is stable and fat-soluble, so it accumulates in fatty tissues
    4. It was never effective against mosquitoes
    Show answer

    Answer: C. DDT is chemically stable and dissolves in fat, and animals metabolise it slowly, so it is stored and builds up in fatty tissue with continued intake. It was very effective against malaria-carrying mosquitoes, which is why it was used so widely.

Questions 1-3: lesson 1 (classification and physical properties). Questions 4-6: lesson 2 (preparation). Questions 7-9: lesson 3 (SN1 and SN2). Questions 10-12: lesson 4 (stereochemistry and elimination). Questions 13-15: lesson 5 (haloarenes and polyhalogen compounds).

Sign in to keep track of the lessons you finish.

Privacy · Terms · Refunds · Delivery