• Foundation
  • About 18 min
  • 5 practice questions

Preparation of haloalkanes and haloarenes

Prepare haloalkanes from alcohols, alkanes and alkenes and by halogen exchange (Finkelstein, Swarts), and prepare haloarenes by electrophilic substitution and the Sandmeyer reaction, explaining the choice of reagent in each case.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Convert alcohols to alkyl halides with HX, PX₃, PCl₅ or SOCl₂ and explain why SOCl₂ is preferred.
  • Predict products of free radical halogenation and of HX or X₂ addition to alkenes.
  • Use the Finkelstein and Swarts reactions to make iodides and fluorides.
  • Prepare aryl halides by halogenation with a Lewis acid and by the Sandmeyer reaction.

Haloalkanes are rarely found ready-made; they are made from cheaper alcohols and hydrocarbons and then used to build other compounds. Choosing the right method matters: one route gives a clean product that is easy to purify, another gives a mixture that is hard to separate.

From alcohols

The –OH group of an alcohol is replaced by halogen using concentrated halogen acids, phosphorus halides or thionyl chloride.
• HX: R–OH + HCl → R–Cl + H₂O. Primary and secondary alcohols need anhydrous ZnCl₂ as catalyst (the Lucas reagent mixture); tertiary alcohols react just on shaking with concentrated HCl at room temperature. Reactivity: 3° > 2° > 1°. Constant-boiling 48% HBr is used for bromides; iodides are made by heating the alcohol with NaI or KI in 95% orthophosphoric acid.
• Phosphorus halides: 3R–OH + PX₃ → 3R–X + H₃PO₃ (X = Cl, Br, I; PBr₃ and PI₃ are made in situ from red phosphorus and Br₂ or I₂); R–OH + PCl₅ → R–Cl + POCl₃ + HCl.
• Thionyl chloride: R–OH + SOCl₂ → R–Cl + SO₂↑ + HCl↑. This is preferred, because both by-products are gases that escape, leaving pure alkyl chloride.

These methods do not work for aryl halides from phenols, because the C–O bond in phenol has partial double bond character and is too strong to break.

Worked example 1: theoretical yield

What mass of bromoethane can be made from 23 g of ethanol, assuming complete conversion? (C₂H₅OH = 46, C₂H₅Br = 109 g mol⁻¹)

C₂H₅OH + HBr → C₂H₅Br + H₂O (1 : 1).
n(ethanol) = 23 ÷ 46 = 0.50 mol → n(bromoethane) = 0.50 mol.
Mass = 0.50 × 109 = 54.5 g. If only 40.9 g is actually obtained, the percentage yield = 40.9 ÷ 54.5 × 100 = 75%.

From hydrocarbons

  • Free radical halogenation of alkanes (Cl₂ or Br₂ with UV light or heat) gives a complex mixture of isomeric mono- and polyhalogen compounds that is hard to separate, so the yield of any one product is low.
  • Addition of HX to alkenes: CH₂=CH₂ + HBr → CH₃CH₂Br. With an unsymmetrical alkene such as propene, two products are possible, but the major one follows Markovnikov's rule (H goes to the carbon that already has more H): CH₃CH=CH₂ + HBr → CH₃CHBrCH₃ (2-bromopropane) as the main product.
  • Addition of halogens: Br₂ in CCl₄ adds across C=C to give a colourless vic-dibromide; the loss of the reddish-brown bromine colour is a test for a double bond.

Worked example 2: monochlorination products

How many monochloro structural isomers can form when 2-methylbutane, (CH₃)₂CHCH₂CH₃, is chlorinated by free radicals?

Label the different kinds of H: (a) the six H of the two equivalent CH₃ on C2; (b) the one H on C2; (c) the two H of C3; (d) the three H of C4.
Each kind gives a different product: (a) ClCH₂CH(CH₃)CH₂CH₃, (b) (CH₃)₂CClCH₂CH₃, (c) (CH₃)₂CHCHClCH₃, (d) (CH₃)₂CHCH₂CH₂Cl. Four isomers, which explains why free radical halogenation gives mixtures.

Halogen exchange

Finkelstein reaction: R–Cl (or R–Br) + NaI → R–I + NaCl (or NaBr), in dry acetone. NaI dissolves in acetone but NaCl and NaBr do not; they precipitate, which drives the reaction forward (Le Chatelier's principle).
Swarts reaction: alkyl fluorides are made by heating an alkyl chloride or bromide with a metallic fluoride such as AgF, Hg₂F₂, CoF₂ or SbF₃: CH₃Br + AgF → CH₃F + AgBr.

Preparation of haloarenes

Electrophilic substitution: benzene reacts with Cl₂ or Br₂ in the presence of a Lewis acid catalyst such as iron or FeCl₃ to give chlorobenzene or bromobenzene. Substituting toluene gives o- and p-isomers, which are easily separated because their melting points differ greatly. Iodination is reversible and needs an oxidising agent (HNO₃ or HIO₄) to remove the HI formed. Fluorination is not done this way because fluorine is far too reactive.

Sandmeyer reaction: a primary aromatic amine in cold aqueous mineral acid is treated with sodium nitrite to form a diazonium salt, ArN₂⁺X⁻. Mixing this with cuprous chloride or cuprous bromide replaces –N₂⁺ by –Cl or –Br. Iodine is introduced simply by shaking the diazonium salt with potassium iodide (no copper salt needed).

From aniline to halobenzenes

  1. Aniline, C₆H₅NH₂ In cold dilute HCl.
  2. Add NaNO₂ at 273–278 K Benzenediazonium chloride, C₆H₅N₂⁺Cl⁻.
  3. Cu₂Cl₂/HCl or Cu₂Br₂/HBr Chlorobenzene or bromobenzene, N₂ evolved.
  4. Or shake with KI Iodobenzene.

Key takeaways

  • Alcohols → alkyl halides with HX (ZnCl₂ for 1°/2°), PX₃, PCl₅ or SOCl₂ (best: gaseous by-products).
  • Free radical halogenation gives mixtures; HX adds to alkenes by Markovnikov's rule.
  • Finkelstein (NaI, dry acetone) gives iodides; Swarts (AgF, Hg₂F₂, CoF₂, SbF₃) gives fluorides.
  • Haloarenes: X₂ with Fe/FeCl₃, or Sandmeyer from diazonium salts (CuCl, CuBr; KI for iodide).

Check your understanding

  1. 1. Why is thionyl chloride preferred for converting ethanol into chloroethane?

    1. It is the cheapest reagent
    2. Its by-products SO₂ and HCl are gases that escape, leaving pure chloroethane
    3. It does not need any heating
    4. It also gives ethyl bromide
    Show answer

    Answer: B. C₂H₅OH + SOCl₂ → C₂H₅Cl + SO₂↑ + HCl↑. The by-products leave as gases, so no separation from other liquids or solids is needed and the product is pure.

  2. 2. What is the major product when propene reacts with HBr (no peroxide)?

    1. 1-Bromopropane
    2. 1,2-Dibromopropane
    3. 2-Bromopropane
    4. Propyne
    Show answer

    Answer: C. By Markovnikov's rule, H adds to the CH₂ carbon (which has more hydrogens) and Br to the middle carbon, giving CH₃CHBrCH₃, 2-bromopropane.

  3. 3. Which reaction makes CH₃CH₂I from CH₃CH₂Br?

    1. Swarts reaction with AgF
    2. Sandmeyer reaction
    3. Wurtz reaction
    4. Finkelstein reaction with NaI in dry acetone
    Show answer

    Answer: D. Halogen exchange with NaI in dry acetone is the Finkelstein reaction. NaBr is insoluble in acetone and precipitates, pushing the equilibrium towards ethyl iodide.

  4. 4. Why cannot chlorobenzene be made by treating phenol with HCl?

    1. The C–O bond in phenol has partial double bond character and is hard to break
    2. Phenol is a gas
    3. HCl reacts with the ring instead
    4. Phenol has no oxygen atom
    Show answer

    Answer: A. Resonance between the oxygen lone pair and the ring gives the C–O bond in phenol partial double bond character. It is stronger than a C–O single bond in alcohols and is not broken by HCl.

  5. 5. 12.0 g of propan-1-ol (60 g mol⁻¹) is fully converted to 1-bromopropane (123 g mol⁻¹). What is the theoretical yield?

    1. 24.6 g
    2. 12.3 g
    3. 49.2 g
    4. 36.9 g
    Show answer

    Answer: A. n(propan-1-ol) = 12.0 ÷ 60 = 0.20 mol. The reaction is 1 : 1, so 0.20 mol of 1-bromopropane forms. Mass = 0.20 × 123 = 24.6 g.

Privacy · Terms · Refunds · Delivery