• Foundation
  • About 20 min
  • 5 practice questions

Nucleophilic substitution: SN2 and SN1 mechanisms

Predict products of nucleophilic substitution of haloalkanes, explain ambident nucleophiles, describe the SN2 and SN1 mechanisms with their kinetics, and order haloalkanes by reactivity in each.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Predict substitution products of RX with OH⁻, OR⁻, CN⁻, NH₃, NO₂⁻ and other nucleophiles.
  • Explain why KCN gives nitriles but AgCN gives isocyanides (and KNO₂ vs AgNO₂).
  • Describe the one-step SN2 and two-step SN1 mechanisms and their rate laws.
  • Arrange halides in order of SN1 and SN2 reactivity, including allylic and benzylic halides.

The polar C–X bond gives the carbon a partial positive charge, making it a target for nucleophiles, electron-rich species that seek a positive centre. When a nucleophile replaces the halogen, which leaves as a halide ion (the leaving group), the reaction is a nucleophilic substitution. It is one of the most useful ways to turn an alkyl halide into an alcohol, ether, amine, nitrile or many other compounds.

Products of nucleophilic substitution

Nucleophilic substitution of alkyl halides
ReagentNucleophileProduct R–NuClass
NaOH (aq) or KOH (aq)HO⁻ROHAlcohol
H₂OH₂OROHAlcohol
NaOR′R′O⁻ROR′Ether
NaII⁻RIAlkyl iodide
NH₃NH₃RNH₂Primary amine
KCNCN⁻ (via C)RCNNitrile (alkyl cyanide)
AgCNAg–CN: (via N)RNCIsocyanide
KNO₂O=N–O⁻ (via O)R–O–N=OAlkyl nitrite
AgNO₂via NR–NO₂Nitroalkane
R′COOAgR′COO⁻R′COOREster
LiAlH₄H⁻RHHydrocarbon

Ambident nucleophiles have two nucleophilic atoms. Cyanide can bond through C (giving nitriles) or N (giving isocyanides); nitrite through O (giving nitrites) or N (giving nitroalkanes). KCN is ionic and supplies free CN⁻, which attacks mainly through carbon because a C–C bond is more stable than a C–N bond: product RCN. AgCN is mainly covalent, the carbon is tied to silver, so nitrogen donates its lone pair: product RNC.

SN2: bimolecular nucleophilic substitution

CH₃Cl + OH⁻ → CH₃OH + Cl⁻ follows second order kinetics: Rate = k[CH₃Cl][OH⁻]. The reaction occurs in one step: the nucleophile attacks the carbon from the side opposite to the leaving group, the new C–O bond forms as the C–Cl bond breaks, and there is no intermediate. In the transition state carbon is partly bonded to five groups (OH and Cl partly, three H in one plane), so it cannot be isolated. The three other groups flip over like an umbrella in a strong wind: inversion of configuration. (The mechanism was proposed by Hughes and Ingold in 1937.)

Because the nucleophile must reach the carbon, bulky groups slow SN2 sharply (steric hindrance). Methyl halides react fastest; tertiary halides slowest. SN2 reactivity: CH₃X > 1° > 2° > 3°.

SN1: unimolecular nucleophilic substitution

(CH₃)₃CBr + OH⁻ → (CH₃)₃COH + Br⁻ follows first order kinetics: Rate = k[(CH₃)₃CBr]. It occurs in two steps, usually in polar protic solvents (water, alcohol, acetic acid):
Step I (slow, reversible): the C–Br bond breaks to give a carbocation and Br⁻; the energy comes from solvation of the halide ion by the protic solvent.
Step II (fast): the nucleophile attacks the carbocation.
The slow step decides the rate, so the rate does not depend on [OH⁻]. The more stable the carbocation, the faster the reaction. SN1 reactivity: 3° > 2° > 1° > CH₃X. Allylic and benzylic halides also react fast by SN1, because their carbocations are stabilised by resonance.

SN2 and SN1 compared

  • SN2
    • One step, no intermediate
    • Rate = k[RX][Nu⁻], second order
    • Favoured for CH₃X and 1° halides
    • Hindered by bulky groups
    • Inversion of configuration
  • SN1
    • Two steps via a carbocation
    • Rate = k[RX], first order
    • Favoured for 3°, allylic and benzylic halides
    • Faster with more stable carbocations; polar protic solvents
    • Racemisation (lesson 4)

Effect of the halogen. For a given alkyl group, both mechanisms follow R–I > R–Br > R–Cl ≫ R–F: the C–I bond is the longest and weakest and iodide is the best leaving group.

Worked example 1: rates under the two mechanisms

In two separate experiments the concentration of hydroxide ion is doubled while [RX] is kept the same. By what factor does the rate change for (a) CH₃Br and (b) (CH₃)₃CBr?
(a) CH₃Br reacts by SN2: Rate = k[CH₃Br][OH⁻]. Doubling [OH⁻] doubles the rate (× 2).
(b) (CH₃)₃CBr reacts by SN1: Rate = k[(CH₃)₃CBr]. [OH⁻] does not appear, so the rate is unchanged (× 1).
If instead [RX] were tripled, both rates would triple.

Worked example 2: ordering the bromobutanes

Order 1-bromobutane, 1-bromo-2-methylpropane, 2-bromobutane and 2-bromo-2-methylpropane for SN1 and SN2.

SN1 follows carbocation stability: 3° > 2° > 1°. Between the two primary bromides, (CH₃)₂CHCH₂Br forms a slightly better stabilised cation because the isopropyl group releases more electrons by the inductive effect.
SN1: CH₃CH₂CH₂CH₂Br < (CH₃)₂CHCH₂Br < CH₃CH₂CHBrCH₃ < (CH₃)₃CBr.
SN2 follows the reverse, as crowding around the carbon increases.
SN2: CH₃CH₂CH₂CH₂Br > (CH₃)₂CHCH₂Br > CH₃CH₂CHBrCH₃ > (CH₃)₃CBr.

Key takeaways

  • Nucleophiles replace X: OH⁻ → alcohol, OR⁻ → ether, CN⁻ → nitrile, NH₃ → amine.
  • KCN gives RCN, AgCN gives RNC; KNO₂ gives R–ONO, AgNO₂ gives R–NO₂.
  • SN2: one step, second order, back-side attack, CH₃ > 1° > 2° > 3°.
  • SN1: carbocation, first order, 3° > 2° > 1°, fast for allylic and benzylic halides; RI > RBr > RCl ≫ RF in both.

Check your understanding

  1. 1. What is the main product when bromoethane reacts with AgNO₂?

    1. Ethyl nitrite, C₂H₅–O–N=O
    2. Nitroethane, C₂H₅–NO₂
    3. Ethanol
    4. Ethyl isocyanide
    Show answer

    Answer: B. Nitrite is ambident. AgNO₂ is covalent, so the nitrogen lone pair attacks, giving the nitroalkane C₂H₅NO₂. Ionic KNO₂ would instead react through oxygen to give ethyl nitrite.

  2. 2. The rate of hydrolysis of an alkyl halide does not change when [OH⁻] is doubled. Which statement is correct?

    1. The reaction is SN2
    2. The halide must be CH₃Br
    3. The reaction is SN1, and the halide is probably tertiary
    4. The rate law is Rate = k[RX][OH⁻]
    Show answer

    Answer: C. A rate independent of [OH⁻] means Rate = k[RX], first order: the SN1 mechanism, whose slow step is ionisation of RX. Tertiary halides typically react this way because they form stable carbocations.

  3. 3. Which compound reacts fastest by the SN2 mechanism?

    1. CH₃I
    2. CH₃Cl
    3. (CH₃)₃CI
    4. (CH₃)₂CHI
    Show answer

    Answer: A. SN2 is fastest for the least hindered carbon (methyl) and the best leaving group (iodide). CH₃I combines both.

  4. 4. Which compound is most reactive towards SN1 hydrolysis?

    1. C₆H₅CH₂Br
    2. C₆H₅CH(CH₃)Br
    3. CH₃CH₂Br
    4. C₆H₅C(CH₃)(C₆H₅)Br
    Show answer

    Answer: D. SN1 rate depends on carbocation stability. C₆H₅C⁺(CH₃)(C₆H₅) is tertiary and stabilised by resonance with two phenyl rings, so it forms most easily. The others give less stabilised cations.

  5. 5. Assertion (A): An SN2 reaction of an alkyl halide occurs with inversion of configuration. Reason (R): In SN2 the nucleophile attacks the carbon from the side opposite to the leaving group.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true. Back-side attack pushes the three other groups through a planar arrangement to the opposite side, like an umbrella turning inside out, which inverts the configuration. R explains A.

Privacy · Terms · Refunds · Delivery