• Foundation
  • About 22 min
  • 5 practice questions

Biot-Savart law and the field of a circular loop

State the Biot-Savart law dB = (μ₀/4π) I dl × r / r³, compare it with Coulomb's law, and derive the magnetic field on the axis and at the centre of a circular current loop.

If something looks wrong, please tell us.

By the end of this lesson you can

  • State the Biot-Savart law in vector and scalar form, with μ₀ = 4π × 10⁻⁷ T m A⁻¹.
  • Compare the Biot-Savart law with Coulomb's law.
  • Derive the field on the axis of a circular loop and at its centre.
  • Use the right-hand thumb rule for a loop, and handle coils of N turns and arcs.

Every magnetic field we know comes from currents (moving charges) or from the intrinsic magnetic moments of particles. The Biot-Savart law tells us the field produced by a tiny piece of current, just as Coulomb's law gives the field of a tiny charge. Adding up the pieces gives the field of any current-carrying wire.

The Biot-Savart law

Take a small element dl of a wire carrying a steady current I. At a point P whose displacement from the element is r, the element produces a field dB that is proportional to I and to |dl|, inversely proportional to r², and perpendicular to the plane containing dl and r:

dB = (μ₀/4π) I dl × r / r³; magnitude dB = (μ₀/4π) I dl sin θ / r², where θ is the angle between dl and r. μ₀/4π = 10⁻⁷ T m A⁻¹ exactly, so μ₀ = 4π × 10⁻⁷ T m A⁻¹ (permeability of free space).

The direction of dl × r follows the right-hand screw rule: looking at the plane containing dl and r, turn from dl towards r; anticlockwise means the field points towards you, clockwise means away from you.

Comparing the two laws
FeatureCoulomb's law (E)Biot-Savart law (B)
Distance dependence1/r², long range1/r², long range
SourceCharge - a scalarCurrent element I dl - a vector
Direction of fieldAlong rPerpendicular to the plane of dl and r
Angle dependenceNone∝ sin θ; zero along the line of dl
SuperpositionYesYes

The constants of the two laws are linked to the speed of light: μ₀ε₀ = 1/c², because (4π × 10⁻⁷)(8.854 × 10⁻¹²) ≈ 1.11 × 10⁻¹⁷ s² m⁻², whose inverse square root is 3 × 10⁸ m s⁻¹. Fixing one constant therefore fixes the other; this link is explored in the chapter on electromagnetic waves.

Worked example 1: field of a short element

An element of length 1 cm along x at the origin carries 5 A. Find the field at a point 0.2 m away on the y-axis. Here θ = 90°: dB = 10⁻⁷ × 5 × 0.01 × 1 ÷ (0.2)² = 5 × 10⁻⁹ ÷ 0.04 = 1.25 × 10⁻⁸ T. Direction: dl × r = x̂ × ŷ = +ẑ. A point on the x-axis (along the element) would get no field at all, since θ = 0.

Field on the axis of a circular loop

A loop of radius R carries current I. Find B at a point P on its axis, a distance x from the centre O.

  1. Every element dl is perpendicular to its displacement r to P, so |dl × r| = r dl, and dB = (μ₀/4π) I dl/r², with r² = x² + R².
  2. dB is perpendicular to the plane of dl and r, so it has a component along the axis and one perpendicular to it.
  3. The perpendicular components of diametrically opposite elements cancel. Only the axial components dB cos α survive, with cos α = R/√(x² + R²).
  4. Summing dl round the loop gives 2πR: B = (μ₀/4π) × I × 2πR × R / (x² + R²)^(3/2).

On the axis: B = μ₀ I R² / [2 (x² + R²)^(3/2)], along the axis. At the centre (x = 0): B = μ₀I/(2R). For N closely wound turns, multiply by N.

Direction - right-hand thumb rule for a loop: curl the fingers of the right hand round the loop in the direction of the current; the thumb gives the direction of B along the axis. The field lines of a loop form closed loops; one face of the loop behaves like the north pole of a magnet and the other like the south pole.

Building the field of a loop from the Biot-Savart law

  1. Pick an element dB = (μ₀/4π) I dl/r² with r² = x² + R².
  2. Resolve dB Into a part along the axis and a part across it.
  3. Use symmetry Opposite elements cancel the cross parts.
  4. Add the axial parts Total B = μ₀IR²/[2(x² + R²)^(3/2)].

Worked example 2: a coil and a point on its axis

A coil of 50 closely wound turns of radius 5 cm carries 2 A. At the centre, B = μ₀NI/(2R) = 4π × 10⁻⁷ × 50 × 2 ÷ 0.1 = 4π × 10⁻⁴ ≈ 1.26 × 10⁻³ T. At a point on the axis where x = √3 R, x² + R² = 4R² and (4R²)^(3/2) = 8R³, so B = μ₀NIR²/(2 × 8R³) = (1/8) × μ₀NI/(2R) ≈ 1.57 × 10⁻⁴ T.

Worked example 3: a semicircular arc

A wire carrying 10 A is bent into a semicircle of radius 3.14 cm, joined to two straight leads that point at the centre. The straight leads give no field at the centre (for them dl is parallel to r, so dl × r = 0). Every element of the arc contributes in the same direction, so the arc gives exactly half the field of a full loop: B = μ₀I/(4R) = 4π × 10⁻⁷ × 10 ÷ (4 × 0.0314) = 1.2566 × 10⁻⁵ ÷ 0.1256 ≈ 1.0 × 10⁻⁴ T, perpendicular to the plane. Bending the arc the other way round reverses the direction but not the size.

Key takeaways

  • dB = (μ₀/4π) I dl × r/r³; μ₀ = 4π × 10⁻⁷ T m A⁻¹.
  • Like Coulomb's law it is inverse-square, but the source is a vector and the field is ⊥ to dl and r.
  • Loop: axial field μ₀IR²/[2(x² + R²)^(3/2)]; centre μ₀NI/(2R); a semicircle gives half.
  • μ₀ε₀ = 1/c².

Check your understanding

  1. 1. According to the Biot-Savart law, the field produced by a current element at a point lying along the line of the element (θ = 0) is

    1. maximum
    2. zero
    3. half the maximum
    4. infinite
    Show answer

    Answer: B. dB ∝ sin θ. Along the line of the element θ = 0, so sin θ = 0 and the element produces no field there.

  2. 2. A circular coil of 40 turns and radius 4 cm carries 2.5 A. What is the field at its centre? (μ₀ = 4π × 10⁻⁷ T m A⁻¹)

    1. 7.85 × 10⁻⁴ T
    2. 3.14 × 10⁻³ T
    3. 1.57 × 10⁻³ T
    4. 1.57 × 10⁻⁵ T
    Show answer

    Answer: C. B = μ₀NI/(2R) = 4π × 10⁻⁷ × 40 × 2.5 ÷ (2 × 0.04) = 4π × 10⁻⁵ ÷ 0.08 ≈ 1.57 × 10⁻³ T.

  3. 3. The field at the centre of a circular loop is B. What is the field at a point on its axis at a distance equal to the radius R from the centre?

    1. B/2
    2. B/√2
    3. B/4
    4. B/(2√2)
    Show answer

    Answer: D. At x = R: B_axis = μ₀IR²/[2(2R²)^(3/2)] = μ₀I/(2R) × 1/(2√2) = B/(2√2), since (2R²)^(3/2) = 2√2 R³.

  4. 4. If the current in a circular loop is doubled and its radius is halved, the field at the centre becomes

    1. 4 times
    2. 2 times
    3. the same
    4. half
    Show answer

    Answer: A. B = μ₀I/(2R) ∝ I/R. Doubling I and halving R multiplies B by 2 × 2 = 4.

  5. 5. Assertion (A): The magnetic field at the centre of a current-carrying semicircular wire is half that of a complete circular loop of the same radius and current. Reason (R): Every element of a circular arc contributes a field in the same direction at the centre.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true. All elements of the arc are perpendicular to their radius and give fields pointing the same way at the centre, so the contributions simply add; half the loop's length gives half the field. R explains A.

Privacy · Terms · Refunds · Delivery