• Foundation
  • About 20 min
  • 5 practice questions

Magnetic force: the Lorentz force and force on a current

Describe Oersted's discovery, use the Lorentz force F = q(E + v × B) to find the size and direction of the magnetic force on a moving charge, define the tesla, and derive F = I l × B for a current-carrying wire.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Describe Oersted's observation linking currents and magnetism.
  • Write the Lorentz force and state the special features of the magnetic part.
  • Define the tesla from F = qvB sin θ and find force directions with the right-hand rule.
  • Derive F = I l × B and apply it to a current-carrying wire.

In 1820 Hans Christian Oersted noticed during a lecture that a compass needle swung when a nearby wire carried a current. The needle set itself along circles centred on the wire, reversed when the current was reversed, and turned more for larger currents or when brought closer. Iron filings around such a wire form concentric circles. Oersted concluded that moving charges produce a magnetic field. Within decades Maxwell had united electricity and magnetism, and realised that light is an electromagnetic wave.

Convention for drawings: a field or current coming out of the page is shown by a dot (like the tip of an arrow pointing at you); one going into the page is shown by a cross (the tail feathers of an arrow moving away).

Sources and fields

A static charge produces an electric field E, and any charge q placed in it feels qE. In the same way, currents (moving charges) produce, in addition, a magnetic field B, a vector field defined at every point of space. Magnetic fields also obey superposition: the field of several sources is the vector sum of their separate fields. In this chapter all fields are steady (not changing with time).

The Lorentz force

A point charge q moving with velocity v through electric and magnetic fields feels the Lorentz force:

F = q [E + v × B] = F_electric + F_magnetic. Magnitude of the magnetic part: F = qvB sin θ, where θ is the angle between v and B.

  • It depends on q, v and B; a negative charge feels a force opposite to that on a positive charge.
  • Being a cross product, it is perpendicular to both v and B, and it is zero when v is parallel or antiparallel to B.
  • A charge at rest feels no magnetic force - only moving charges do.
  • Its direction for a positive charge follows the right-hand (screw) rule for v × B: turn v towards B; the thumb (or a right-handed screw) gives the force.

The tesla. Setting q = 1 C, v = 1 m s⁻¹ perpendicular to B and F = 1 N defines the SI unit of magnetic field, the tesla (T): 1 T = 1 N s C⁻¹ m⁻¹ = 1 N A⁻¹ m⁻¹. It is a large unit; a smaller non-SI unit is the gauss (1 G = 10⁻⁴ T). The earth's field is of the order of 10⁻⁵ T (a few times 10⁻⁵ T).

Electric force and magnetic force on a charge

  • Electric force qE
    • Acts on charges at rest or moving
    • Along E (or opposite for negative q)
    • Can do work and change speed
    • Independent of velocity
  • Magnetic force qv × B
    • Acts only on moving charges
    • Perpendicular to both v and B
    • Does no work; speed stays constant
    • Depends on speed and direction of motion

Worked example 1: force on a moving proton

A proton moves at 2 × 10⁶ m s⁻¹ through a field of 0.5 T. (a) If v ⊥ B: F = qvB = 1.6 × 10⁻¹⁹ × 2 × 10⁶ × 0.5 = 1.6 × 10⁻¹³ N. (b) If v makes 30° with B: F = 1.6 × 10⁻¹³ × sin 30° = 8 × 10⁻¹⁴ N. (c) Direction: let v be along +x and B along +z. Then v × B = x̂ × ẑ = −ŷ, so the proton is pushed along −y, while an electron with the same velocity would be pushed along +y.

Force on a current-carrying conductor

Consider a straight rod of length l and cross-section A, with n mobile carriers of charge q per unit volume, drifting at velocity vd. The rod contains nlA carriers, each feeling q vd × B, so the total force is F = (nlA) q vd × B. Since nqvd is the current density j and jA = I, we can write:

F = I l × B, where l has the length of the rod and points along the current. Magnitude: F = IlB sin θ.

Here B is the external field, not the field of the rod itself. For a wire of any shape, add the forces I dl × B on all its small straight pieces. A current is not a vector; the direction has been transferred to l.

Finding the force on a straight current-carrying wire

  1. Identify I, l and B Note the angle θ between the wire (current direction) and B.
  2. Magnitude F = IlB sin θ.
  3. Direction Use l × B: perpendicular to both the wire and the field.
  4. Check special cases Wire parallel to B: no force; wire perpendicular: maximum force IlB.

Worked example 2: floating a wire

A horizontal wire with mass 50 g per metre carries 5 A. What horizontal field, perpendicular to the wire, can hold it up against gravity (g = 9.8 m s⁻²)? For balance, IlB = mg, so B = (m/l) g / I = 0.05 × 9.8 ÷ 5 = 0.098 T. Only the mass per unit length matters. (The earth's field is far too weak to matter here.)

Worked example 3: wire at an angle

A 0.2 m wire carrying 4 A lies at 60° to a uniform field of 0.6 T. F = IlB sin θ = 4 × 0.2 × 0.6 × sin 60° = 0.48 × 0.866 ≈ 0.42 N, perpendicular to the plane containing the wire and the field.

Key takeaways

  • Moving charges (currents) produce magnetic fields; fields add by superposition.
  • Lorentz force: F = q(E + v × B); the magnetic part is ⊥ to v, does no work, and vanishes for v ∥ B or v = 0.
  • 1 T = 1 N A⁻¹ m⁻¹; 1 G = 10⁻⁴ T.
  • Force on a wire: F = I l × B, magnitude IlB sin θ.

Check your understanding

  1. 1. An electron moves along +x through a magnetic field directed along +y. In which direction is the magnetic force on it?

    1. +z
    2. −z
    3. +y
    4. −x
    Show answer

    Answer: B. For a positive charge F is along v × B = x̂ × ŷ = +ẑ. The electron is negative, so the force is reversed: along −z.

  2. 2. A charge of 2 μC moves at 3 × 10⁴ m s⁻¹ at 90° to a field of 0.5 T. What is the magnetic force on it?

    1. 3 × 10⁻² N
    2. 3 × 10⁻⁶ N
    3. 1.2 × 10⁻² N
    4. 1.5 × 10⁻² N
    Show answer

    Answer: A. F = qvB sin 90° = 2 × 10⁻⁶ × 3 × 10⁴ × 0.5 = 3 × 10⁻² N.

  3. 3. A straight wire 0.5 m long carries 6 A along the direction of a uniform magnetic field of 0.2 T. The force on it is

    1. 0.6 N
    2. 0.3 N
    3. Zero
    4. 1.5 N
    Show answer

    Answer: C. F = IlB sin θ with θ = 0° (current parallel to B), so sin θ = 0 and the force is zero.

  4. 4. A wire 25 cm long carrying 8 A is perpendicular to a field of 0.3 T. What force acts on it?

    1. 2.4 N
    2. 0.06 N
    3. 6 N
    4. 0.6 N
    Show answer

    Answer: D. F = IlB = 8 × 0.25 × 0.3 = 0.6 N.

  5. 5. Assertion (A): A static magnetic field cannot change the kinetic energy of a charged particle. Reason (R): The magnetic force on a moving charge is always perpendicular to its velocity.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true. A force perpendicular to the velocity does no work (F · v = 0), so the speed and kinetic energy stay constant; only the direction changes. R explains A.

Privacy · Terms · Refunds · Delivery