Revision notes

Chapter 4 Moving Charges and Magnetism: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Magnetic force: the Lorentz force and force on a current

F = q [E + v × B] = F_electric + F_magnetic. Magnitude of the magnetic part: F = qvB sin θ, where θ is the angle between v and B.

Electric force and magnetic force on a charge

  • Electric force qE
    • Acts on charges at rest or moving
    • Along E (or opposite for negative q)
    • Can do work and change speed
    • Independent of velocity
  • Magnetic force qv × B
    • Acts only on moving charges
    • Perpendicular to both v and B
    • Does no work; speed stays constant
    • Depends on speed and direction of motion

F = I l × B, where l has the length of the rod and points along the current. Magnitude: F = IlB sin θ.

Finding the force on a straight current-carrying wire

  1. Identify I, l and B Note the angle θ between the wire (current direction) and B.
  2. Magnitude F = IlB sin θ.
  3. Direction Use l × B: perpendicular to both the wire and the field.
  4. Check special cases Wire parallel to B: no force; wire perpendicular: maximum force IlB.
  • Moving charges (currents) produce magnetic fields; fields add by superposition.
  • Lorentz force: F = q(E + v × B); the magnetic part is ⊥ to v, does no work, and vanishes for v ∥ B or v = 0.
  • 1 T = 1 N A⁻¹ m⁻¹; 1 G = 10⁻⁴ T.
  • Force on a wire: F = I l × B, magnitude IlB sin θ.
Read the full lesson

Lesson 2

Motion of a charged particle in a magnetic field

r = mv/(qB); ν = qB/(2πm); T = 2πm/(qB). A larger momentum gives a larger circle, but the time for one turn is independent of the speed.

Radius of the helix r = m v_⊥/(qB). Pitch (distance moved along B in one turn) p = v_∥ T = 2πm v_∥/(qB).

Path of a charged particle in a uniform magnetic field

  • v parallel to B
    • No force
    • Straight line at constant speed
  • v perpendicular to B
    • Circle in the plane ⊥ to B
    • r = mv/(qB)
    • T = 2πm/(qB)
  • v at an angle θ to B
    • Helix about B
    • Radius from v sin θ
    • Pitch from v cos θ
  • The magnetic force does no work: speed and kinetic energy are constant.
  • v ⊥ B: circle with r = mv/(qB), period T = 2πm/(qB) independent of speed.
  • General case: helix with radius m v_⊥/(qB) and pitch 2πm v_∥/(qB).
Read the full lesson

Lesson 3

Biot-Savart law and the field of a circular loop

dB = (μ₀/4π) I dl × r / r³; magnitude dB = (μ₀/4π) I dl sin θ / r², where θ is the angle between dl and r. μ₀/4π = 10⁻⁷ T m A⁻¹ exactly, so μ₀ = 4π × 10⁻⁷ T m A⁻¹ (permeability of free space).

Comparing the two laws
FeatureCoulomb's law (E)Biot-Savart law (B)
Distance dependence1/r², long range1/r², long range
SourceCharge - a scalarCurrent element I dl - a vector
Direction of fieldAlong rPerpendicular to the plane of dl and r
Angle dependenceNone∝ sin θ; zero along the line of dl
SuperpositionYesYes

On the axis: B = μ₀ I R² / [2 (x² + R²)^(3/2)], along the axis. At the centre (x = 0): B = μ₀I/(2R). For N closely wound turns, multiply by N.

Building the field of a loop from the Biot-Savart law

  1. Pick an element dB = (μ₀/4π) I dl/r² with r² = x² + R².
  2. Resolve dB Into a part along the axis and a part across it.
  3. Use symmetry Opposite elements cancel the cross parts.
  4. Add the axial parts Total B = μ₀IR²/[2(x² + R²)^(3/2)].
  • dB = (μ₀/4π) I dl × r/r³; μ₀ = 4π × 10⁻⁷ T m A⁻¹.
  • Like Coulomb's law it is inverse-square, but the source is a vector and the field is ⊥ to dl and r.
  • Loop: axial field μ₀IR²/[2(x² + R²)^(3/2)]; centre μ₀NI/(2R); a semicircle gives half.
  • μ₀ε₀ = 1/c².
Read the full lesson

Lesson 4

Ampere's circuital law, the solenoid and forces between currents

∮ B · dl = μ₀ I, where I is the total current passing through the surface bounded by the loop.

B = μ₀I/(2πr), with field lines forming concentric circles round the wire. Right-hand rule: grasp the wire with the thumb along the current; the fingers curl in the direction of B.

Inside a long solenoid: B = μ₀nI, uniform and along the axis (direction by the right-hand rule), where n = turns per unit length.

F/L = μ₀ I_a I_b / (2πd). Parallel currents (same direction) attract; antiparallel currents repel.

Parallel and antiparallel currents

  • Same direction
    • Each wire sits in the other's field
    • Force on each points towards the other
    • Wires attract
    • F/L = μ₀I_aI_b/(2πd)
  • Opposite directions
    • Field directions at each wire reverse relative to its current
    • Force on each points away from the other
    • Wires repel
    • Same magnitude formula
  • ∮ B · dl = μ₀I_enclosed (steady currents); with symmetry, BL = μ₀I_e.
  • Long wire: B = μ₀I/(2πr) outside; inside a uniform thick wire B ∝ r.
  • Long solenoid: B = μ₀nI inside, ≈ 0 outside.
  • Parallel currents attract, antiparallel repel: F/L = μ₀I_aI_b/(2πd); this defines the ampere.
Read the full lesson

Lesson 5

Torque on a current loop, magnetic dipole and the moving coil galvanometer

τ = m × B, |τ| = mB sin θ, where the magnetic moment m = NIA for a coil of N turns, directed along the normal given by the right-hand thumb rule. Unit of m: A m² (or J T⁻¹). Net force in a uniform field: zero.

kφ = NIAB, so φ = (NAB/k) I. The deflection is proportional to the current. Current sensitivity φ/I = NAB/k; voltage sensitivity φ/V = NAB/(kR_G).

How a moving coil galvanometer gives a reading

  1. Current I enters the coil The coil sits in a strong radial field.
  2. Magnetic torque NIAB, the same at every angle because the field is radial.
  3. Spring twists Restoring torque kφ grows with the deflection.
  4. Balance kφ = NIAB, so the pointer's deflection φ is proportional to I.
Turning a galvanometer into meters
FeatureAmmeterVoltmeter
Connected in the circuitIn seriesIn parallel
ModificationSmall shunt resistance S in parallel with GLarge resistance R in series with G
Resulting resistanceG S/(G + S) ≈ S, very smallG + R ≈ R, very large
Design formula (full-scale current I_g)S = I_g G/(I − I_g) for range IR = V/I_g − G for range V
Ideal valueZero resistanceInfinite resistance
  • Current loop in uniform B: no net force; torque τ = m × B with m = NIA.
  • m ∥ B is stable equilibrium; m antiparallel to B is unstable.
  • Far away, a current loop is a magnetic dipole: B_axis = (μ₀/4π)(2m/x³), B_plane = (μ₀/4π)(m/x³).
  • Galvanometer: kφ = NIAB in a radial field. Ammeter = G + small shunt in parallel; voltmeter = G + large series resistance.
Read the full lesson

Privacy · Terms · Refunds · Delivery