- Foundation
- About 26 min
- 5 practice questions
Einstein's photoelectric equation
Explain why the wave theory fails for the photoelectric effect, derive and use Einstein's equation Kₘₐₓ = hν − φ₀, and find Planck's constant and work function from a graph of stopping potential against frequency.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain which observations the wave theory of light cannot explain.
- State Einstein's photoelectric equation and the threshold condition ν₀ = φ₀/h.
- Write eV₀ = hν − φ₀ and interpret the slope and intercepts of the V₀–ν graph.
- Solve numericals on stopping potential, threshold frequency and threshold wavelength.
The wave picture of light explained interference, diffraction and polarisation so well that it seemed beyond doubt. The photoelectric effect is where it broke down. Einstein's explanation, in 1905, introduced the idea that light energy comes in discrete packets.
Constants used in this course: h = 6.63 × 10⁻³⁴ J s, e = 1.6 × 10⁻¹⁹ C, electron mass mₑ = 9.1 × 10⁻³¹ kg, c = 3 × 10⁸ m s⁻¹, and 1 eV = 1.6 × 10⁻¹⁹ J.
What the wave theory predicts
In the wave picture, energy is spread continuously over the wavefront, and a surface electron soaks it up continuously. Brighter light means larger field amplitudes, so:
- each electron should gain more energy from brighter light, so Kₘₐₓ should increase with intensity; experiment says it does not;
- with enough intensity or waiting time, light of any frequency should free electrons, so there should be no threshold; experiment says there is;
- with dim light shared among many electrons, calculations suggest an electron could need hours to gather enough energy; experiment shows emission is instantaneous.
Einstein's picture
Einstein proposed that radiation energy is made of discrete quanta, each of energy hν, where h is Planck's constant. In the photoelectric effect a single electron absorbs a single quantum. Part of that energy, at least φ₀, is used to escape; the rest appears as kinetic energy. The least tightly bound electrons emerge with the most energy:
Einstein's photoelectric equation: Kₘₐₓ = hν − φ₀. Threshold: ν₀ = φ₀/h (threshold wavelength λ₀ = hc/φ₀). With Kₘₐₓ = eV₀: V₀ = (h/e)ν − φ₀/e.
One photon, one electron
- Photon of energy hν arrives Energy depends only on frequency.
- Absorbed by a single electron The whole quantum is taken up at once.
- Work function φ₀ used to escape Possible only if hν ≥ φ₀.
- Remainder is kinetic energy At most Kₘₐₓ = hν − φ₀ = eV₀.
How the equation explains every observation
| Observation | Wave theory | Einstein's photon picture |
|---|---|---|
| Kₘₐₓ independent of intensity | Fails: predicts Kₘₐₓ rises with intensity | Kₘₐₓ = hν − φ₀ depends only on ν; intensity only sets the number of photons |
| Threshold frequency exists | Fails: any frequency should work eventually | Needs hν ≥ φ₀, so ν₀ = φ₀/h; a bigger work function means a higher threshold |
| Current ∝ intensity | Partly | More photons per second free more electrons per second |
| No time lag | Fails: predicts long delays for dim light | Absorbing one photon is a single, instantaneous event |
The V₀–ν graph
Since eV₀ = hν − φ₀, the graph of V₀ against ν is a straight line. Its slope is h/e, the same for every metal. It meets the ν-axis at ν₀ (where V₀ = 0) and, if extended, meets the V₀-axis at −φ₀/e. Graphs for different metals are therefore parallel lines with different intercepts. Millikan set out (1906–1916) to disprove Einstein's equation, but his careful measurements on sodium and other alkali metals gave straight lines whose slope, with the known value of e, gave h close to 6.626 × 10⁻³⁴ J s, the value found from a completely different context. The experiment confirmed the equation instead.
Worked example 1: stopping potential and threshold
Light of wavelength 400 nm falls on a metal of work function 2.0 eV. Photon energy: E = hc/λ = (6.63 × 10⁻³⁴ × 3 × 10⁸)/(400 × 10⁻⁹) = 4.97 × 10⁻¹⁹ J = 4.97 × 10⁻¹⁹ ÷ 1.6 × 10⁻¹⁹ ≈ 3.1 eV. Kₘₐₓ = 3.1 − 2.0 = 1.1 eV, so V₀ = 1.1 V. Threshold frequency: ν₀ = φ₀/h = (2.0 × 1.6 × 10⁻¹⁹)/(6.63 × 10⁻³⁴) ≈ 4.8 × 10¹⁴ Hz. Threshold wavelength: λ₀ = c/ν₀ ≈ 620 nm; red light of longer wavelength would release no electrons.
Worked example 2: Planck's constant from a graph
A student records (made-up data) V₀ = 0.40 V at ν = 5.5 × 10¹⁴ Hz and V₀ = 1.228 V at ν = 7.5 × 10¹⁴ Hz for one metal. Slope = (1.228 − 0.40)/(7.5 − 5.5) × 10¹⁴ = 0.828/(2.0 × 10¹⁴) = 4.14 × 10⁻¹⁵ V s. h = slope × e = 4.14 × 10⁻¹⁵ × 1.6 × 10⁻¹⁹ ≈ 6.62 × 10⁻³⁴ J s. Work function: φ₀/e = (h/e)ν − V₀ = 4.14 × 10⁻¹⁵ × 5.5 × 10¹⁴ − 0.40 ≈ 2.28 − 0.40 = 1.88 V, so φ₀ ≈ 1.88 eV.
Worked example 3: will emission occur?
A metal has work function 4.5 eV. Ultraviolet light of wavelength 300 nm falls on it. Photon energy = hc/λ = (6.63 × 10⁻³⁴ × 3 × 10⁸)/(300 × 10⁻⁹) = 6.63 × 10⁻¹⁹ J ≈ 4.1 eV. Since 4.1 eV < 4.5 eV, no photoelectrons are emitted, however intense the light.
A handy shortcut: with these constants hc ≈ 1240 eV nm, so the photon energy in eV is about 1240 ÷ (wavelength in nm). For 400 nm this gives 3.1 eV, matching Worked example 1.
Key takeaways
- The wave theory cannot explain the intensity-independence of Kₘₐₓ, the threshold or the absence of delay.
- Kₘₐₓ = hν − φ₀ = eV₀; emission needs ν ≥ ν₀ = φ₀/h.
- V₀ against ν: straight line of slope h/e for every metal.
- Millikan's measurements confirmed the equation and gave h.
Check your understanding
-
1. Light of photon energy 3.1 eV falls on a metal of work function 2.3 eV. The stopping potential is
- 3.1 V
- 0.8 V
- 2.3 V
- 5.4 V
Show answer
Answer: B. Kₘₐₓ = hν − φ₀ = 3.1 − 2.3 = 0.8 eV. Since Kₘₐₓ = eV₀, the stopping potential is 0.8 V.
-
2. The work function of a metal is 3.0 eV. Its threshold wavelength is about (use hc ≈ 1240 eV nm)
- 413 nm
- 620 nm
- 300 nm
- 372 nm
Show answer
Answer: A. λ₀ = hc/φ₀ = 1240 eV nm ÷ 3.0 eV ≈ 413 nm. Longer wavelengths carry too little energy per photon to free electrons.
-
3. Graphs of stopping potential against frequency are drawn for two different metals. The graphs are
- lines through the origin with different slopes
- curves that meet at the threshold frequency
- parallel straight lines with different intercepts
- the same line
Show answer
Answer: C. V₀ = (h/e)ν − φ₀/e. The slope h/e is the same for every metal, while the intercepts depend on the work function. So the lines are parallel and cut the frequency axis at different thresholds.
-
4. The threshold frequency of a metal is 4.0 × 10¹⁴ Hz. Light of frequency 6.0 × 10¹⁴ Hz falls on it. The stopping potential is about
- 2.5 V
- 1.66 V
- 0.41 V
- 0.83 V
Show answer
Answer: D. eV₀ = h(ν − ν₀) = 6.63 × 10⁻³⁴ × 2.0 × 10¹⁴ = 1.326 × 10⁻¹⁹ J. V₀ = 1.326 × 10⁻¹⁹ / 1.6 × 10⁻¹⁹ ≈ 0.83 V.
-
5. Assertion (A): The maximum kinetic energy of photoelectrons does not depend on the intensity of the incident light. Reason (R): In the photon picture, intensity decides the number of photons, while the energy given to each electron comes from a single photon of energy hν.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: A. Both are true. Each electron absorbs one photon, so Kₘₐₓ = hν − φ₀ depends only on the frequency. Brighter light means more photons and more electrons, not more energy per electron. R explains A.
Sign in to keep track of the lessons you finish.