- Foundation
- About 20 min
- 5 practice questions
Electrons, the electron volt and electron emission
Recall how the electron was discovered and its charge measured, define work function and the electron volt, and compare thermionic, field and photoelectric emission.
If something looks wrong, please tell us.
By the end of this lesson you can
- Outline how cathode rays led to the discovery of the electron and the measurement of e/m and e.
- Explain why free electrons stay inside a metal and define the work function.
- Convert between electron volts and joules.
- Name and compare the three ways of making a metal emit electrons.
By the end of the 19th century, Maxwell's equations and Hertz's experiments had firmly established that light is a wave. Yet within a few years, experiments on electrons and light forced physicists to accept that light also behaves like a stream of particles, and that particles behave like waves. This chapter tells that story. It begins with the electron itself.
Constants used in this course: h = 6.63 × 10⁻³⁴ J s, e = 1.6 × 10⁻¹⁹ C, electron mass mₑ = 9.1 × 10⁻³¹ kg, c = 3 × 10⁸ m s⁻¹, and 1 eV = 1.6 × 10⁻¹⁹ J.
Discovery of the electron
When a high voltage is applied across a gas at very low pressure (about 0.001 mm of mercury) in a discharge tube, a glow appears on the glass opposite the cathode. The glow is caused by cathode rays coming from the cathode. William Crookes suggested that these rays were streams of fast, negatively charged particles. In 1897 J. J. Thomson confirmed this: using electric and magnetic fields at right angles across the tube, he measured the speed of the particles and their specific charge e/m.
The accepted value of e/m is about 1.76 × 10¹¹ C kg⁻¹. Crucially, it came out the same whatever metal the cathode was made of and whatever gas filled the tube. Particles given off by metals lit with ultraviolet light, or by hot metals, had the same e/m. So all these particles were identical, and Thomson named them electrons, universal constituents of matter. In 1913 R. A. Millikan's oil-drop experiment showed that the charge on any droplet was always a whole-number multiple of an elementary charge, about 1.602 × 10⁻¹⁹ C. Charge is quantised, and knowing e and e/m gives the electron's mass.
Worked example 1: mass of the electron
Using e = 1.6 × 10⁻¹⁹ C and e/m = 1.76 × 10¹¹ C kg⁻¹: m = e ÷ (e/m) = (1.6 × 10⁻¹⁹)/(1.76 × 10¹¹) ≈ 9.1 × 10⁻³¹ kg.
Why electrons need energy to leave a metal
A metal contains free electrons that carry current, but they cannot normally leave the surface. If one starts to escape, the metal it leaves behind becomes positively charged and pulls it back; the positive ions hold the free electrons inside. An electron escapes only if it gets enough extra energy to overcome this pull. The minimum energy needed by an electron to escape from a metal surface is the work function φ₀ of that metal. It depends on the metal and on the condition of its surface.
The electron volt
Energies of electrons are tiny in joules, so a convenient unit is used. One electron volt (1 eV) is the energy gained by an electron when it is accelerated through a potential difference of 1 volt. Since energy gained = charge × potential difference, 1 eV = (1.6 × 10⁻¹⁹ C)(1 V) = 1.6 × 10⁻¹⁹ J.
1 eV = 1.6 × 10⁻¹⁹ J. An electron accelerated through V volts gains eV joules, i.e. V electron volts, of kinetic energy.
Worked example 2: energy and speed after acceleration
An electron starting from rest is accelerated through 100 V. Kinetic energy: K = 100 eV = 100 × 1.6 × 10⁻¹⁹ = 1.6 × 10⁻¹⁷ J. Speed: ½mv² = K, so v = √(2K/m) = √(2 × 1.6 × 10⁻¹⁷ / 9.1 × 10⁻³¹) = √(3.52 × 10¹³) ≈ 5.9 × 10⁶ m s⁻¹, about 2% of the speed of light.
Worked example 3: work function in joules
A metal has work function 2.5 eV. In joules: φ₀ = 2.5 × 1.6 × 10⁻¹⁹ = 4.0 × 10⁻¹⁹ J. Any process that hands a surface electron at least this much energy can free it.
Three ways to free electrons
Electron emission from a metal
-
Thermionic emission
- Energy supplied by heating the metal
- Hot filaments in vacuum tubes and old picture tubes
-
Field emission
- A very strong electric field, of the order of 10⁸ V m⁻¹, pulls electrons out
- Happens at sharp points, as in a spark plug
-
Photoelectric emission
- Light of suitable (high enough) frequency falls on the metal
- The electrons released are called photoelectrons
The rest of this chapter concerns the third process. It turned out to be the key evidence that light energy comes in packets.
| Quantity | Symbol | SI unit | Dimensions |
|---|---|---|---|
| Planck's constant | h | J s | [M L² T⁻¹] |
| Work function | φ₀ | J (often eV) | [M L² T⁻²] |
| Stopping potential | V₀ | V | [M L² T⁻³ A⁻¹] |
| Threshold frequency | ν₀ | Hz | [T⁻¹] |
| de Broglie wavelength | λ | m | [L] |
Key takeaways
- Thomson measured e/m of cathode-ray particles; its constancy showed electrons are universal.
- Millikan showed charge is quantised, with e ≈ 1.6 × 10⁻¹⁹ C.
- Work function: the least energy for an electron to leave a metal surface.
- Electrons can be freed by heat, strong fields or light.
Check your understanding
-
1. The work function of a metal is
- the energy of the fastest electron inside the metal
- the minimum energy an electron needs to escape from the metal surface
- the energy needed to ionise one atom of the metal
- the potential difference across the metal
Show answer
Answer: B. By definition, the work function is the least energy that must be given to a free electron at the surface to pull it out against the attraction of the positive ions.
-
2. An electron is accelerated from rest through a potential difference of 50 V. Its kinetic energy in joules is
- 1.6 × 10⁻¹⁹ J
- 3.2 × 10⁻²¹ J
- 50 J
- 8.0 × 10⁻¹⁸ J
Show answer
Answer: D. K = eV = (1.6 × 10⁻¹⁹ C)(50 V) = 8.0 × 10⁻¹⁸ J, which is 50 eV.
-
3. Electrons are pulled out of a metal at a sharp point by an electric field of about 10⁸ V m⁻¹. This is
- thermionic emission
- photoelectric emission
- field emission
- secondary emission
Show answer
Answer: C. When a very strong electric field supplies the escape energy, the process is field emission, as in a spark plug. Heating gives thermionic emission and light gives photoelectric emission.
-
4. What did Millikan's oil-drop experiment establish?
- Electrons have wave properties
- The specific charge of the electron
- Light consists of photons
- Electric charge comes in whole-number multiples of an elementary charge
Show answer
Answer: D. Millikan found that the charge on every droplet was an integral multiple of about 1.6 × 10⁻¹⁹ C, showing charge is quantised. Thomson, not Millikan, measured e/m.
-
5. Assertion (A): The specific charge e/m of cathode-ray particles is the same whatever gas fills the tube and whatever metal the cathode is made of. Reason (R): Cathode-ray particles are electrons, which are the same in all matter.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: A. Both are true. Thomson found the same e/m (about 1.76 × 10¹¹ C kg⁻¹) in every case, because the particles are electrons, universal constituents of all atoms. R explains A.
Sign in to keep track of the lessons you finish.