- Foundation
- About 13 min
- 5 practice questions
Angles: vertex, arms and size
Recognise an angle as two rays from a common starting point, name it with three letters, and understand its size as the amount of turn.
If something looks wrong, please tell us.
By the end of this lesson you can
- Identify the vertex and arms of an angle in a figure or an everyday object.
- Name an angle with three letters, keeping the vertex in the middle.
- Explain that the size of an angle is the amount of turn, not the length of the arms.
Open a door, a pair of scissors or the cover of a notebook, and you make an angle. Angles are everywhere: in the hands of a clock, the corners of a window and the legs of a compass. In this lesson we learn what an angle is, how to name it and what its 'size' really means.
What is an angle?
An angle is formed by two rays that start from the same point. The common starting point is the vertex and the two rays are the arms. In a pair of scissors, the screw is the vertex and the blades are the arms. In a compass, the hinge at the top is the vertex and the two legs are the arms.
Parts of an angle
-
Vertex
- The common starting point of the two rays
- Written in the middle of the angle's name
-
Arms
- The two rays
- They go on for ever, so their drawn length does not matter
-
Size
- The amount of turn from one arm to the other
Naming an angle
If the rays are BD and BE, the angle can be called angle DBE or angle EBD, written ∠DBE or ∠EBD. The vertex is always the middle letter. If only one angle is at the vertex, we may simply say ∠B. But if several angles share vertex B, '∠B' is unclear, and we must use three letters. A small curve drawn near the vertex shows which angle we mean.
Worked example 1: naming angles at one vertex
Three rays PA, PB and PC start at point P, with PB lying between PA and PC. The angles are ∠APB, ∠BPC and ∠APC. Writing ∠P alone could mean any of the three, so it is not a clear name. Writing ∠PAB would be wrong, because it puts A in the middle as if A were the vertex.
Size of an angle: the amount of turn
Imagine one arm lying on top of the other and then turning about the vertex until it reaches its final position. The size of the angle is the amount of turn needed. Opening a notebook cover a little makes a small angle; opening it wider needs more turn and makes a larger angle. Opening it until it lies flat on the table makes an even larger angle.
The size of an angle is the amount of rotation about the vertex that takes one arm to the other. Making the arms longer does not change the angle.
A common mistake is to think that longer arms mean a bigger angle. They do not. Think of a clock: the hour hand and minute hand at 3 o'clock make the same angle whether the clock is a small wristwatch or a huge tower clock.
Worked example 2: angles from three points
Mark points A, B and C not on one line and draw the lines AB, BC and CA. The angles we can name using these letters are: at A, ∠BAC (same as ∠CAB); at B, ∠ABC (same as ∠CBA); at C, ∠ACB (same as ∠BCA). So there are 3 angles, one at each point, and each has two correct names.
Worked example 3: angles at four points
Mark points A, B, C and D with no three on a line and join every pair. At point A, three lines leave: AB, AC and AD. Any two of them make an angle: ∠BAC, ∠CAD and ∠BAD, which is 3 angles. The same is true at B, C and D. So there are 3 × 4 = 12 angles that can be named with these letters.
| Object | Vertex | Arms |
|---|---|---|
| Scissors | The screw | The two blades |
| Door opening | The hinge line seen from above | The door and the wall it closed against |
| Clock | The centre pin | The hour hand and the minute hand |
| Compass (geometry box) | The hinge | The two legs |
Key takeaways: an angle is made by two rays from a common starting point, the vertex. Name it with three letters, vertex in the middle, such as ∠DBE. Its size is the amount of turn between the arms, not how long the arms are drawn.
Check your understanding
-
1. In ∠XYZ, which point is the vertex?
- X
- Y
- Z
- There is no vertex
Show answer
Answer: B. The vertex is always the middle letter of a three-letter angle name, so the vertex of ∠XYZ is Y. Its arms are the rays YX and YZ.
-
2. Rays OM and ON start at O. Which of these is a correct name for the angle they form?
- ∠OMN
- ∠MNO
- ∠NMO
- ∠MON
Show answer
Answer: D. The vertex O must be in the middle, so the angle is ∠MON (or ∠NOM). The other names put M or N in the middle, which would make them the vertex.
-
3. Ravi draws an angle and then makes both arms twice as long. What happens to the size of the angle?
- It stays the same
- It doubles
- It halves
- It becomes a straight angle
Show answer
Answer: A. The size of an angle is the amount of turn between the arms. Lengthening the arms does not change the turn, so the angle stays the same.
-
4. Four rays OA, OB, OC and OD start from O in that order. Why is '∠O' a poor name here?
- Because O is not a vertex
- Because angles must be named with two letters
- Because several different angles share the vertex O
- Because O must be written last
Show answer
Answer: C. Many angles, such as ∠AOB, ∠AOC and ∠BOD, have O as vertex, so '∠O' does not say which one is meant. Three letters remove the doubt.
-
5. Points A, B, C and D are marked with no three on a line, and every pair is joined. How many angles can be named using these letters?
- 4
- 6
- 8
- 12
Show answer
Answer: D. At each point three lines meet, and any two of them form an angle, giving 3 angles at each point. With 4 points that is 3 × 4 = 12 angles.
Sign in to keep track of the lessons you finish.