• Foundation
  • About 14 min
  • 5 practice questions

Comparing angles and special angles

Compare two angles by placing one on the other or by using a circle, and recognise full turns, straight angles, right angles, perpendicular lines, acute and obtuse angles.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Compare angles by superimposition and with a transparent circle.
  • Describe a full turn, a straight angle and a right angle, and make a right angle by folding paper.
  • Classify an angle as acute, right, obtuse or straight by comparing it with a right angle.

Which crane opens its beak wider? Which door is open more? To answer such questions we must compare angles. Sometimes one angle is clearly bigger, but when two angles are close in size, we need a careful method.

Comparing by superimposition

Superimposition means placing one figure exactly on top of another. To compare two angles, trace one on thin paper and place it on the other so that the vertices match and one arm lies along one arm. Then look at the second arms. If the second arm of the traced angle lies inside the other angle, the traced angle is smaller; if it lies outside, it is larger; if the arms lie on top of each other, the angles are equal.

Comparing two angles by superimposition

  1. Trace one angle Copy it on thin paper.
  2. Match the vertices Put one vertex exactly on the other.
  3. Line up one arm Lay one arm along an arm of the other angle.
  4. Look at the other arms Inside means smaller, outside means larger, on top means equal.

Comparing with a transparent circle

Place a transparent circle so that its centre sits on the vertex of the first angle, and mark where the two arms cross the edge of the circle. Move the circle to the second angle, centre on its vertex, with one arm through the first mark. If the second arm passes through the second mark, the angles are equal; if not, you can see which is larger from where the arm crosses the edge. A slit cut in card works the same way: a pair of hinged arms passes through an angle-shaped slit only if its angle exactly equals the slit's angle, whatever the length of the arms.

Special angles

AngleAmount of turnWhat it looks like
Full turnOne complete turnThe arm comes back to where it started
Straight angleHalf a turnThe two arms lie in one straight line, in opposite directions
Right angleQuarter of a turnAn 'L' shape, like the corner of a page

A straight angle can be split into two equal angles by folding: fold a straight edge so that one half lies exactly on the other half. The crease makes two equal angles, and each is a right angle. So a straight angle is two right angles and a full turn is four right angles. Two lines that meet at a right angle are called perpendicular lines. The edges of a window frame and the lines on a ruled notebook with its margin are examples.

Acute and obtuse angles

Every other angle can be compared with a right angle. An angle smaller than a right angle is acute (the word means sharp). An angle larger than a right angle but smaller than a straight angle is obtuse (the word means blunt). A quick test is to hold the corner of a sheet of paper against the angle.

Angles compared with a right angle

  • Acute
    • Less than a right angle
    • Less than a quarter turn
  • Right
    • Exactly a quarter turn
    • Arms are perpendicular
  • Obtuse
    • More than a right angle
    • Less than a straight angle
  • Straight
    • Exactly a half turn
    • Two right angles

Worked example 1: classifying by turning

A ceiling fan blade turns from pointing at the door to pointing at the window, which is a third of a full turn. A quarter turn is a right angle and a half turn is a straight angle. Since one third is more than one quarter but less than one half, the angle turned is obtuse.

Worked example 2: making a right angle on a slanting crease

Fold a sheet of paper to get any slanting crease. Now fold the paper again so that the crease folds exactly onto itself. The new crease splits the straight angle along the first crease into two equal halves, so each is a right angle. In fact, when you unfold the paper, the two creases cross and make 4 right angles, because the angles around the crossing make a full turn, which is 4 right angles.

Full turn = 2 straight angles = 4 right angles. Acute is less than a right angle; obtuse is between a right angle and a straight angle.

Key takeaways: compare angles by placing one on the other with vertices matched and one pair of arms lined up, or by using a transparent circle. A straight angle is a half turn and two right angles make it. Perpendicular lines meet at right angles. Acute angles are smaller than a right angle; obtuse angles lie between a right angle and a straight angle.

Check your understanding

  1. 1. When comparing two angles by superimposition, what must be done first?

    1. Make the arms equal in length
    2. Place one vertex exactly on the other vertex
    3. Measure both arms with a ruler
    4. Draw a circle around each angle
    Show answer

    Answer: B. The vertices must match and one arm must lie along one arm; then the other arms show which angle is larger. Arm lengths do not matter.

  2. 2. How many right angles make a full turn?

    1. 2
    2. 3
    3. 4
    4. 6
    Show answer

    Answer: C. A straight angle (half turn) is two right angles, so a full turn, which is two straight angles, is 2 × 2 = 4 right angles.

  3. 3. An angle is larger than a right angle but smaller than a straight angle. What kind of angle is it?

    1. Obtuse
    2. Acute
    3. Reflex
    4. Right
    Show answer

    Answer: A. Angles between a right angle and a straight angle are called obtuse. Acute angles are smaller than a right angle.

  4. 4. What are two lines that meet at a right angle called?

    1. Parallel lines
    2. Straight lines
    3. Curved lines
    4. Perpendicular lines
    Show answer

    Answer: D. Lines that meet at a right angle are perpendicular. Parallel lines never meet at all.

  5. 5. A clock's minute hand turns from 12 to 2. Compared with a right angle (12 to 3), what kind of angle has it turned?

    1. Right
    2. Obtuse
    3. Acute
    4. Straight
    Show answer

    Answer: C. Turning from 12 to 3 is a quarter turn, a right angle. From 12 to 2 is less than that, so the angle is smaller than a right angle, which makes it acute.

Privacy · Terms · Refunds · Delivery