Revision notes

Chapter 2 Lines and Angles: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Points, line segments, lines and rays

Segment, line and ray

  • Line segment AB
    • Two end points
    • Fixed length
    • AB and BA name the same segment
  • Line AB
    • No end points
    • Goes on for ever both ways
    • Can be named with a small letter, like l
  • Ray AP
    • One starting point, A
    • Goes on for ever one way
    • Starting point written first

Two points fix exactly one line. A segment has two end points, a ray has one starting point, and a line has none.

Key takeaways: a point is a location; a segment is the shortest path between two end points; a line goes on for ever both ways; a ray starts at one point and goes on for ever one way. In naming a ray, the starting point comes first. Exactly one line passes through two points, while countless lines pass through one point.

Read the full lesson

Lesson 2

Angles: vertex, arms and size

Parts of an angle

  • Vertex
    • The common starting point of the two rays
    • Written in the middle of the angle's name
  • Arms
    • The two rays
    • They go on for ever, so their drawn length does not matter
  • Size
    • The amount of turn from one arm to the other

The size of an angle is the amount of rotation about the vertex that takes one arm to the other. Making the arms longer does not change the angle.

Angles in everyday objects
ObjectVertexArms
ScissorsThe screwThe two blades
Door openingThe hinge line seen from aboveThe door and the wall it closed against
ClockThe centre pinThe hour hand and the minute hand
Compass (geometry box)The hingeThe two legs

Key takeaways: an angle is made by two rays from a common starting point, the vertex. Name it with three letters, vertex in the middle, such as ∠DBE. Its size is the amount of turn between the arms, not how long the arms are drawn.

Read the full lesson

Lesson 3

Comparing angles and special angles

Comparing two angles by superimposition

  1. Trace one angle Copy it on thin paper.
  2. Match the vertices Put one vertex exactly on the other.
  3. Line up one arm Lay one arm along an arm of the other angle.
  4. Look at the other arms Inside means smaller, outside means larger, on top means equal.
AngleAmount of turnWhat it looks like
Full turnOne complete turnThe arm comes back to where it started
Straight angleHalf a turnThe two arms lie in one straight line, in opposite directions
Right angleQuarter of a turnAn 'L' shape, like the corner of a page

Angles compared with a right angle

  • Acute
    • Less than a right angle
    • Less than a quarter turn
  • Right
    • Exactly a quarter turn
    • Arms are perpendicular
  • Obtuse
    • More than a right angle
    • Less than a straight angle
  • Straight
    • Exactly a half turn
    • Two right angles

Full turn = 2 straight angles = 4 right angles. Acute is less than a right angle; obtuse is between a right angle and a straight angle.

Key takeaways: compare angles by placing one on the other with vertices matched and one pair of arms lined up, or by using a transparent circle. A straight angle is a half turn and two right angles make it. Perpendicular lines meet at right angles. Acute angles are smaller than a right angle; obtuse angles lie between a right angle and a straight angle.

Read the full lesson

Lesson 4

Measuring angles in degrees with a protractor

AngleFraction of a full turnMeasure
Full turn1360°
Straight angle1/2360° ÷ 2 = 180°
Right angle1/4360° ÷ 4 = 90°
Half of a right angle1/8360° ÷ 8 = 45°

Measuring an angle with a protractor

  1. Centre on the vertex Put the centre point of the protractor exactly on the vertex.
  2. Base line on one arm Line up the 0° line with one arm.
  3. Choose the scale Use the scale that starts at 0 on that arm.
  4. Read the other arm Read where the second arm crosses that scale.
  5. Check Acute angles read less than 90, obtuse ones more than 90.

Full turn = 360°, straight angle = 180°, right angle = 90°. On a protractor, put the centre on the vertex, one arm on 0, and read from the scale that starts at 0.

Key takeaways: angles are measured in degrees, with 360° in a full turn. A protractor has two scales; use the one that starts at 0 on the arm you lined up, or subtract two readings. Folding bisects angles, giving 90°, 45° and 22.5°.

Read the full lesson

Lesson 5

Drawing angles and types of angles by measure

Drawing ∠ABC = 40° with a protractor

  1. Draw the base arm Use a ruler to draw a ray BC.
  2. Place the protractor Centre on B, with the 0° line along BC.
  3. Count from 0 Using the scale that starts at 0 on BC, find 40 and mark a dot A there.
  4. Join Remove the protractor and join B to A with a ruler.
  5. Label Write 40° inside the angle near B.
Every angle has a type
TypeMeasureExample
AcuteMore than 0° and less than 90°35°, 72°
RightExactly 90°Corner of a book
ObtuseMore than 90° and less than 180°110°, 165°
StraightExactly 180°The two arms form a line
ReflexMore than 180° and less than 360°200°, 300°

Types of angles

  • Acute
    • 0° to 90°, not including either
  • Right
    • Exactly 90°
  • Obtuse
    • Between 90° and 180°
  • Straight
    • Exactly 180°
  • Reflex
    • Between 180° and 360°
    • Measured the 'long way round'

Angles on a straight line add up to 180°. Angles all the way around a point add up to 360°. Reflex angle = 360° − the smaller angle.

Key takeaways: to draw an angle, draw one arm, centre the protractor on its end with 0 along the arm, mark the measure and join. Acute < 90°, right = 90°, obtuse between 90° and 180°, straight = 180°, reflex between 180° and 360°. Use 180° for a straight line and 360° for a full turn to find unknown angles.

Read the full lesson

Privacy · Terms · Refunds · Delivery