• Foundation
  • About 25 min
  • 15 practice questions

Final self-assessment: Metals and non-metals

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Attempt all 15 questions in one sitting, writing down your reasoning for each one before you look at the answers. The questions mix ideas from all five lessons and are a little harder than the lesson checks. When you finish, read every explanation, including those for the questions you got right.

Final self-assessment

  1. 1. An unknown solid is dull, breaks when hammered and does not conduct electricity. It is most likely:

    1. A non-metal
    2. A metal
    3. An alloy such as steel
    4. Mercury
    Show answer

    Answer: A. Dull appearance, brittleness and poor conduction are typical of non-metals.

  2. 2. Which statement is TRUE?

    1. All metals are hard solids
    2. Mercury is a solid non-metal
    3. Coal is malleable
    4. Some metals, such as sodium, are soft enough to cut with a knife
    Show answer

    Answer: D. Sodium and potassium are soft metals. Mercury is a liquid metal, and coal is brittle.

  3. 3. A goldsmith beats a small piece of gold into a leaf so thin that light passes through it. Which property is being used?

    1. Ductility
    2. Malleability
    3. Sonority
    4. Brittleness
    Show answer

    Answer: B. Beating a metal into thin sheets uses malleability; gold is the most malleable metal.

  4. 4. A sitar string, a school bell and a tawa use, in order, which properties of metals?

    1. Ductility, sonority, conduction of heat
    2. Sonority, ductility, lustre
    3. Malleability, conduction of electricity, brittleness
    4. Lustre, malleability, sonority
    Show answer

    Answer: A. A string is a drawn wire (ductility), a bell rings (sonority), and a tawa passes heat to food (conduction of heat).

  5. 5. Why are tawas usually made of iron?

    1. Iron is a poor conductor of heat
    2. Iron is a non-metal
    3. Iron is a good conductor of heat and is strong
    4. Iron is a good conductor of electricity, which cooks the food
    Show answer

    Answer: C. A tawa must pass heat from the flame to the food, so it should be a good conductor of heat. Its electrical conduction has nothing to do with cooking on a flame.

  6. 6. Why does an electrician wear rubber gloves?

    1. Rubber is a good conductor of electricity
    2. Rubber is a poor conductor of electricity and protects against shocks
    3. Rubber makes the current stronger
    4. Rubber is a metal
    Show answer

    Answer: B. Rubber does not let current pass easily, so it stops current from flowing through the electrician's body.

  7. 7. Three iron nails are kept in dry air, in air-free water, and partly in water open to air. Which rusts?

    1. Only the nail in dry air
    2. Only the nail in air-free water
    3. All three rust equally
    4. Only the nail partly in water and open to air
    Show answer

    Answer: D. Rusting needs both air and water. Only the third nail has both.

  8. 8. Which method of preventing rust uses a coating of another metal?

    1. Painting
    2. Oiling
    3. Greasing
    4. Galvanisation
    Show answer

    Answer: D. Galvanisation coats iron with zinc, a metal. Paint, oil and grease are not metals.

  9. 9. The green layer on old copper objects and the black layer on silver are examples of:

    1. Rusting of iron
    2. Corrosion
    3. Ductility
    4. Neutralisation
    Show answer

    Answer: B. Corrosion is the gradual damage of metal surfaces by air, water or other substances. Rusting is the name used only for iron.

  10. 10. Magnesium oxide and sulfur dioxide are each dissolved in water and tested with litmus. Which result is correct?

    1. Both turn red litmus blue
    2. Both turn blue litmus red
    3. Magnesium oxide solution turns red litmus blue; sulfur dioxide solution turns blue litmus red
    4. Magnesium oxide is acidic and sulfur dioxide basic
    Show answer

    Answer: C. Metal oxides are generally basic and non-metal oxides acidic.

  11. 11. Which of these substances is generally found NOT to react with water?

    1. Sulfur
    2. Sodium
    3. Iron in moist air
    4. Magnesium oxide
    Show answer

    Answer: A. Sulfur placed in water shows no reaction; non-metals generally do not react with water. Sodium reacts vigorously, iron rusts in moist air, and magnesium oxide dissolves to give a basic solution.

  12. 12. A metal reacts so strongly with water and air that it is kept under kerosene. Predict the nature of its oxide.

    1. Acidic
    2. Basic
    3. Neutral
    4. It cannot form an oxide
    Show answer

    Answer: B. The substance described is sodium, a metal. Metal oxides are generally basic.

  13. 13. Which list contains only non-metals?

    1. Oxygen, nitrogen, carbon
    2. Iron, oxygen, sulfur
    3. Copper, gold, aluminium
    4. Plastic, glass, wood
    Show answer

    Answer: A. Oxygen, nitrogen and carbon are non-metal elements. Iron, copper, gold and aluminium are metals, and plastic, glass and wood are not elements at all.

  14. 14. Iodine solution is applied to wounds. What is it used as?

    1. A fertiliser
    2. A fuel
    3. A metal coating
    4. An antiseptic
    Show answer

    Answer: D. A solution of iodine, a non-metal, is used as an antiseptic on wounds.

  15. 15. Why is recycling iron and aluminium useful?

    1. It turns metals into non-metals
    2. It makes metals rust faster
    3. It reduces waste and saves natural resources
    4. It is useful only for gold
    Show answer

    Answer: C. Recycling lets metals be used again, which reduces waste and the need to mine new ore, helping sustainability.

Questions 1-3: lesson 1 (lustre, hardness, malleability). Questions 4-6: lesson 2 (ductility, sonority, conduction). Questions 7-9: lesson 3 (rusting and corrosion). Questions 10-12: lesson 4 (reactions with oxygen and water). Questions 13-15: lesson 5 (elements, non-metals and uses).

Sign in to keep track of the lessons you finish.

Privacy · Terms · Refunds · Delivery