- Foundation
- About 15 min
- 5 practice questions
Pitch, loudness, audible range and musical sound
Relate pitch to frequency and loudness to amplitude, classify sounds as infrasonic, audible or ultrasonic, and describe noise, hearing, tones, notes, timbre and the octave.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain how pitch depends on frequency and loudness on amplitude.
- Classify a sound as infrasonic, audible or ultrasonic from its frequency.
- Describe how the ear hears, and explain tone, note, timbre and octave with examples.
Frequency, wavelength and amplitude can be measured with instruments. But how a sound feels to a listener, shrill or deep, loud or soft, depends on the human ear and brain. This lesson links what we measure to what we hear.
Pitch
Pitch is how we perceive the frequency of a sound. A whistle, a siren or a small bird's call is high-pitched (shrill); thunder, a big drum or an aircraft's rumble is low-pitched (deep). In general, a higher frequency is heard as a higher pitch, though the exact relation is not a simple one. When you sing Sa, Re, Ga, Ma, Pa, Dha, Ni, Sa in order, the frequency rises with each note. A thin, tight string vibrates faster than a thick, loose one, so it gives a higher pitch. In adolescence, boys' vocal cords grow longer and thicker and vibrate less often, which is why their voices deepen.
Loudness
Loudness is how we perceive the amplitude of a sound: a larger amplitude sounds louder. Loudness falls as we move away from the source. Intensity is a measured physical quantity, whereas loudness also depends on the listener's hearing. Loudness is commonly expressed in decibels (dB). Rustling leaves are only a few dB, ordinary conversation is around 60 dB, and very loud sounds such as firecrackers can go above 100 dB. A small rise in decibels means a large rise in intensity.
Physical quantity and what we hear
-
Frequency
- Measured in hertz (Hz)
- Heard as pitch
- Higher frequency: shriller sound
-
Amplitude
- Largest change in density
- Heard as loudness
- Larger amplitude: louder sound
The audible range
Humans can hear only sounds with frequencies from about 20 Hz to 20,000 Hz (20 kHz). This range differs from person to person and narrows with age. Sound below 20 Hz is infrasonic (infrasound); sound above 20 kHz is ultrasonic (ultrasound). We cannot hear either, but some animals can: dogs, cats, bats and dolphins detect ultrasound, while elephants detect infrasound.
Infrasonic: below 20 Hz. Audible: 20 Hz to 20 kHz. Ultrasonic: above 20 kHz.
Worked example 1: classifying sounds
Question: Classify sounds of 12 Hz, 3.5 kHz and 45 kHz.
Working: 12 Hz is below 20 Hz, so infrasonic. 3.5 kHz = 3500 Hz lies between 20 Hz and 20,000 Hz, so audible. 45 kHz = 45,000 Hz is above 20,000 Hz, so ultrasonic.
Noise and hearing
Unwanted or harmful sound is noise. Long exposure to loud sound can disturb sleep, harm health and cause hearing loss, which can be tested with a hearing test called an audiogram. A hearing aid has a microphone, an amplifier and a speaker that make sounds louder for the wearer. Keeping earphone volume moderate is a simple way to protect your hearing.
How we hear
- Sound enters the ear Compressions and rarefactions travel down the ear canal.
- Eardrum vibrates A thin membrane moves in and out with the wave.
- Tiny bones amplify Three small bones make the vibrations stronger.
- Cochlea converts The vibrations become electrical signals.
- Brain interprets The signals are perceived as sound.
Having two ears also tells us where a sound comes from: the brain compares which ear receives it first, even when the gap is less than a thousandth of a second. Snakes and fish sense vibrations through their bodies instead.
Tone, note, timbre and octave
A tone is a sound of a single frequency, such as that of a tuning fork or a careful whistle. A musical note, such as from a tanpura string or a singing voice, is a mixture: a lowest frequency called the fundamental together with higher frequencies called overtones. Timbre (sound quality) is what makes a flute, an ektara and a tabla sound different even when they play the same note at the same loudness; it depends on the instrument's shape, material and construction. An octave is the interval between two notes where one has double the frequency of the other. The black patch (syaahi) on a tabla or mridangam changes how the membrane vibrates and gives these drums their rich, musical sound; Sir C. V. Raman studied this in his work on acoustics.
Worked example 2: octaves
Question: A note has a fundamental frequency of 240 Hz. Find the frequencies one octave and two octaves above it, and one octave below it.
Working: One octave up doubles the frequency: 240 × 2 = 480 Hz. Two octaves up: 480 × 2 = 960 Hz. One octave down halves it: 240 ÷ 2 = 120 Hz.
Key takeaways: pitch depends on frequency and loudness on amplitude; humans hear about 20 Hz to 20 kHz; below is infrasonic, above is ultrasonic; noise can damage hearing; a note is a fundamental plus overtones, timbre is an instrument's sound quality, and an octave doubles the frequency.
Check your understanding
-
1. A siren sounds shrill while thunder sounds deep. The siren's sound has a
- lower frequency
- higher frequency
- larger amplitude only
- longer time period
Show answer
Answer: B. A shrill (high-pitched) sound has a higher frequency. Higher frequency also means a shorter time period, so "longer time period" is wrong.
-
2. Which frequency is ultrasonic?
- 15 Hz
- 1.5 kHz
- 15 kHz
- 35 kHz
Show answer
Answer: D. Ultrasonic means above 20 kHz. 35 kHz = 35,000 Hz is above 20,000 Hz. 15 Hz is infrasonic; 1.5 kHz and 15 kHz are audible.
-
3. Two sounds have the same frequency, but one has a larger amplitude. Compared with the other, it will be
- louder, with the same pitch
- higher in pitch
- softer
- lower in pitch
Show answer
Answer: A. Amplitude decides loudness and frequency decides pitch. Same frequency means same pitch; larger amplitude means louder.
-
4. A flute and a sitar play the same note at the same loudness, yet you can tell them apart. This is because of their different
- frequencies
- speeds
- timbres
- media
Show answer
Answer: C. Timbre, the quality of a sound, comes from the pattern and strength of overtones, decided by each instrument's shape, material and construction.
-
5. A note one octave above 330 Hz has a frequency of
- 660 Hz
- 165 Hz
- 990 Hz
- 340 Hz
Show answer
Answer: A. An octave higher means double the frequency: 330 × 2 = 660 Hz. 165 Hz would be an octave lower.
Sign in to keep track of the lessons you finish.