• Foundation
  • About 16 min
  • 5 practice questions

Sound as a longitudinal wave: compressions and rarefactions

Describe how sound travels as compressions and rarefactions, explain why it is a longitudinal mechanical wave, show that sound carries energy, and read a density-distance graph with crests and troughs.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Describe how a vibrating source makes compressions and rarefactions that travel through air.
  • Tell longitudinal from transverse waves and mechanical from non-mechanical waves.
  • Read a density-distance graph of a sound wave and mark crests, troughs, compressions and rarefactions.

We know that sound needs a medium. But the air between a temple bell and your ear does not blow towards you when the bell rings. So what actually travels? This lesson shows that what moves is a pattern of squeezed and stretched regions of the medium, carrying energy with it.

A slinky model

Lay a long spring toy (a slinky) on the floor. A friend holds one end still. Push your end forward sharply and pull it back. A region where the turns are bunched together moves along the slinky, followed by a region where the turns are spread apart. A paint mark on one turn does not travel along; it only shakes back and forth about its own place. The disturbance travels; the material stays.

Compressions and rarefactions in air

Now imagine a long tube of air with a piston at one end. When the piston moves forward, it pushes the nearby air particles together, making a small region where the air is denser than usual. This region of higher density is a compression (C). These particles bump into the next ones and pass the squeeze along. When the piston moves back, the air near it spreads out, making a region of lower density, a rarefaction (R). This too is passed along. A piston (or any source) vibrating continuously sends out alternating compressions and rarefactions.

One vibration of a source in air

  1. Source moves forward Air ahead is squeezed: a compression forms.
  2. Compression passes on Particles push their neighbours and return to place.
  3. Source moves back Air near it spreads out: a rarefaction forms.
  4. Rarefaction passes on The next forward movement starts a new compression.

Then back to step 1: Source moves forward

Each to-and-fro movement of the source sends out one compression and one rarefaction.

A sound wave is a series of compressions and rarefactions travelling through a medium. The particles of the medium only vibrate about their mean positions; they do not travel with the wave.

— Definition

In open air the particles push on neighbours in every direction, so the sound spreads out in all directions from a small source, like a growing sphere. Sudden loud sounds such as thunder or a cracker come from air being heated and expanding very quickly, which sends out one strong pulse of compression.

Longitudinal and transverse; mechanical and non-mechanical

Two kinds of wave motion

  • Longitudinal wave
    • Particles vibrate parallel to the direction the wave travels
    • Made of compressions and rarefactions
    • Example: sound
    • Some earthquake waves are longitudinal
  • Transverse wave
    • Particles vibrate at right angles (perpendicular) to the direction of travel
    • Made of humps and dips
    • Example: a wave flicked along a rope
    • Light is also a transverse wave

A wave that needs a material medium is a mechanical wave. Sound is a mechanical wave, which is why it cannot cross a vacuum. Not all waves are mechanical: light needs no medium, which is how sunlight and starlight reach us across space.

Sound carries energy

Stretch a piece of balloon rubber over a bowl and sprinkle a few grains of rice on it. Beat a steel plate loudly nearby without touching the bowl, and the grains jump. The sound wave made the sheet vibrate, so it must have carried energy. A microphone uses this: sound makes a thin diaphragm vibrate, and the vibrations are turned into an electrical signal. A speaker does the reverse: an electrical signal makes its cone vibrate, producing sound.

Worked example 1: what reaches the ear?

Question: A tuning fork vibrates 1 m from your ear. Do the air particles next to the fork reach your ear?

Working: (1) Each particle only vibrates about its own mean position. (2) It passes the push to its neighbour, which passes it on. (3) So the particles near the fork stay near the fork. What reaches your ear is the disturbance, that is, the energy carried by the wave.

Drawing a sound wave as a graph

At one instant, the density of the air changes from place to place along the wave. If we plot density (y-axis) against distance from the source (x-axis), we get a wavy curve around a dashed line marking the average density. The highest points are in compressions (maximum density) and are called crests. The lowest points are in rarefactions (minimum density) and are called troughs.

Part of the waveDensity of mediumOn the graph
CompressionHigher than averageCrest (peak) at the centre
RarefactionLower than averageTrough (dip) at the centre
Between themEqual to averageWhere the curve crosses the dashed line

Worked example 2: reading a graph

Question: A density-distance graph shows crests at 0 cm, 4 cm and 8 cm. Where are the troughs, and how many compressions are between 0 and 8 cm (both ends included)?

Working: (1) A trough lies halfway between two crests: (0 + 4) ÷ 2 = 2 cm and (4 + 8) ÷ 2 = 6 cm. (2) Each crest marks the middle of a compression: at 0, 4 and 8 cm, so 3 compressions. (3) The troughs at 2 cm and 6 cm mark 2 rarefactions.

Key takeaways: sound travels as compressions (high density) and rarefactions (low density); particles only vibrate about mean positions while energy moves on; sound is a longitudinal, mechanical wave; on a density-distance graph, crests are compressions and troughs are rarefactions.

Check your understanding

  1. 1. A region of air where the density is higher than average is called a

    1. rarefaction
    2. compression
    3. trough
    4. vacuum
    Show answer

    Answer: B. When a source pushes forward, it crowds particles together. This higher-density region is a compression. A rarefaction is the lower-density region.

  2. 2. Why is sound called a longitudinal wave?

    1. It travels long distances
    2. Particles vibrate at right angles to the direction of travel
    3. It can travel through a vacuum
    4. Particles of the medium vibrate parallel to the direction of travel
    Show answer

    Answer: D. In sound, particles move back and forth along the same line in which the wave travels. That is the meaning of longitudinal.

  3. 3. Assertion (A): Compressions and rarefactions move forward through air. Reason (R): Each air particle keeps moving forward with the wave. Choose the correct option.

    1. Both A and R are true and R explains A
    2. Both A and R are true but R does not explain A
    3. A is true but R is false
    4. A is false but R is true
    Show answer

    Answer: C. The pattern of compressions and rarefactions does travel (A is true), but each particle only vibrates about its mean position and does not travel with the wave (R is false).

  4. 4. On a density-distance graph of a sound wave, crests are 6 cm apart, with one crest at 3 cm. Where is the nearest trough to the right of it?

    1. 3 cm
    2. 6 cm
    3. 9 cm
    4. 4.5 cm
    Show answer

    Answer: B. A trough is halfway between two crests. The next crest is at 3 + 6 = 9 cm, so the trough is at (3 + 9) ÷ 2 = 6 cm.

  5. 5. Which device changes sound energy into an electrical signal?

    1. Microphone
    2. Speaker
    3. Tuning fork
    4. Electric bell
    Show answer

    Answer: A. In a microphone, sound makes a thin diaphragm vibrate and the vibration is turned into an electrical signal. A speaker does the reverse.

Privacy · Terms · Refunds · Delivery