• Foundation
  • About 18 min
  • 5 practice questions

Reflection of sound: echo, reverberation, ultrasound and sonar

Apply the laws of reflection to sound, calculate echo distances and the 17 m minimum, explain reverberation, and describe uses of ultrasonic and infrasonic waves including echolocation and sonar.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain echo and reverberation and find the minimum distance needed to hear an echo.
  • Solve echo, sonar and echolocation problems using distance = speed × time ÷ 2.
  • List uses of ultrasonic and infrasonic waves in medicine, industry and nature.

Shout in a large empty hall or near a hill and your voice may come back to you. Bats fly through dark caves without hitting the walls, and ships find the depth of the sea without touching the bottom. All of these depend on one behaviour of sound: it bounces off surfaces.

Reflection of sound

Sound bounces back from hard surfaces such as walls, cliffs and water. This is the reflection of sound. It obeys the same laws as the reflection of light: the angle of incidence equals the angle of reflection, measured from the normal at the point where the sound strikes, and the incident direction, the reflected direction and the normal all lie in the same plane. Hard, smooth surfaces reflect sound well; soft surfaces like curtains absorb it; rough surfaces scatter it.

Echo

An echo is a reflected sound heard separately after the original. Our brain can hear two sounds as separate only if they reach us at least 0.1 s apart. In a small room the reflection returns too soon, so we hear no echo.

To hear an echo, the reflected sound must arrive at least 0.1 s after the original. For any echo: distance to the surface = (speed × total time) ÷ 2.

— Echo rule

Worked example 1: minimum distance for an echo

Question: Taking the speed of sound in air as 340 m s⁻¹, find the least distance of a wall from which an echo can be heard.

Working: In 0.1 s, sound travels 340 × 0.1 = 34 m. This is the path to the wall and back, so the wall must be at least 34 ÷ 2 = 17 m away.

Worked example 2: distance of a cliff

Question: A boy claps facing a cliff and hears the echo 1.2 s later. Speed of sound = 340 m s⁻¹. How far is the cliff?

Working: Total path = 340 × 1.2 = 408 m (to the cliff and back). Distance to the cliff = 408 ÷ 2 = 204 m.

Reverberation

In a large hall, sound reflects many times from walls, ceiling and floor. When these reflections arrive one after another too quickly to be heard separately, they merge with the original and make the sound persist after the source has stopped. This is reverberation. Some reverberation makes music sound full, but too much makes speech blurred. Concert halls and auditoriums are designed to control it, using sound-absorbing panels, cushioned seats, curtains and other soft, porous materials. The Gol Gumbaz in Vijayapura (Bijapur), Karnataka, is famous for its whispering gallery, where a faint whisper is heard repeated across the great dome.

Echo and reverberation

  • Echo
    • One clear repeat of a sound
    • Reflection arrives 0.1 s or more later
    • Needs a distant hard surface (at least about 17 m)
    • Example: shouting at a hill
  • Reverberation
    • Sound lingers and blurs
    • Many reflections arrive less than 0.1 s apart
    • Happens in large closed halls
    • Reduced by soft, absorbing materials

Ultrasonic and infrasonic waves at work

Applications of sound outside the audible range
WaveUses
Ultrasonic (above 20 kHz)Imaging organs inside the body without surgery (ultrasonography); breaking kidney stones into small pieces; cleaning delicate machine parts and ultrasonic welding; finding hidden cracks inside metal blocks; locating objects by their echoes
Infrasonic (below 20 Hz)Detecting earthquakes and volcanic eruptions; detecting severe storms, because infrasound travels long distances through air and the ground

Echolocation: most bats send out short bursts of ultrasound and listen for the echoes from obstacles and prey. From the echoes they judge where things are, even in total darkness. Dolphins, whales and some birds also use echolocation. People use the same idea in sonar (sound navigation and ranging): a ship sends ultrasonic pulses into the water and times the echoes to find the distance and direction of the seabed, shipwrecks or submarines. Sound is used under water because it travels far in water, while light does not.

How sonar finds depth

  1. Transmitter sends a pulse Ultrasound goes down into the sea.
  2. Pulse reflects It bounces off the seabed or an object.
  3. Receiver detects the echo The time from sending to receiving is measured.
  4. Depth is calculated Depth = speed of sound in water × time ÷ 2.

Worked example 3: sonar

Question: A sonar pulse returns 2.4 s after being sent. The speed of sound in seawater is 1500 m s⁻¹. How deep is the seabed?

Working: One-way time = 2.4 ÷ 2 = 1.2 s. Depth = 1500 × 1.2 = 1800 m.

Worked example 4: a parking sensor

Question: A car's ultrasonic sensor detects a wall 0.85 m behind it. Taking the speed of sound in air as 340 m s⁻¹, how long does the pulse take to go and return?

Working: Total path = 2 × 0.85 = 1.7 m. Time = distance ÷ speed = 1.7 ÷ 340 = 0.005 s.

Key takeaways: sound reflects by the same laws as light; an echo needs a gap of at least 0.1 s, so a reflector at least about 17 m away in air; reverberation is lingering sound from many quick reflections; for echoes, distance = speed × time ÷ 2; ultrasound is used in medicine, industry, echolocation and sonar, and infrasound in detecting earthquakes and storms.

Check your understanding

  1. 1. Why is no echo heard in a small room?

    1. The reflected sound returns in less than 0.1 s and merges with the original
    2. Sound cannot reflect from walls
    3. The air in a room absorbs all sound
    4. Sound travels faster in small rooms
    Show answer

    Answer: A. Walls do reflect sound, but in a small room the reflection returns in well under 0.1 s, so the brain cannot separate it from the original sound.

  2. 2. A girl hears the echo of her shout from a wall 1 s after shouting. Speed of sound = 340 m s⁻¹. How far is the wall?

    1. 340 m
    2. 680 m
    3. 170 m
    4. 34 m
    Show answer

    Answer: C. Total path = 340 × 1 = 340 m, which covers the trip to the wall and back. Distance = 340 ÷ 2 = 170 m.

  3. 3. A sonar pulse returns after 4 s. If sound travels at 1500 m s⁻¹ in seawater, the depth is

    1. 6000 m
    2. 1500 m
    3. 375 m
    4. 3000 m
    Show answer

    Answer: D. One-way time = 4 ÷ 2 = 2 s. Depth = 1500 × 2 = 3000 m.

  4. 4. Which of these is a use of infrasonic waves?

    1. Imaging a baby in the womb
    2. Breaking kidney stones
    3. Detecting earthquakes and volcanic eruptions
    4. Cleaning watch parts
    Show answer

    Answer: C. Infrasound (below 20 Hz) travels long distances through the ground and air, so it helps detect earthquakes, eruptions and storms. The other three are uses of ultrasound.

  5. 5. Which change would reduce reverberation in a large hall?

    1. Making the walls of polished marble
    2. Adding curtains, cushioned seats and sound-absorbing panels
    3. Removing all furniture
    4. Making the ceiling hard and flat
    Show answer

    Answer: B. Soft, porous materials absorb sound instead of reflecting it, so fewer reflections linger. Hard, smooth or bare surfaces increase reverberation.

Sign in to keep track of the lessons you finish.

Next lesson → Final self-assessment: Sound Waves

Privacy · Terms · Refunds · Delivery